journal article·2017-08

The effects of second phases on superelastic behavior of TNTZ bio alloy

M.A. Kalaie, A. Zarei-Hanzaki, M. Ghambari, P. Dastur, J. Málek, E. Farghadany

Publisher page

Abstract

Abstract The present work was conducted to investigate the effects of second phases on the stability of β phase and superelastic behavior of a Ti–Nb–Ta–Zr (TNTZ) bio-alloy. For this purpose, the as-hot forged material was subjected to different thermal treatments. These included solution annealing, aging treatments at 500 °C for 48 h, and annealing at 850 °C for 45 min followed by quenching in water and ethanol solution, to obtain alpha (α) precipitate and α″ martensite, respectively, as the second phase in the β phase structure. These ended to different microstructures. The superelastic behavior of single β phase structure showed pseudoelastic (S) ratio of 20%. Furthermore, the precipitation of α phase reduced the S ratio to 6%. The α phase decreased the superelasticity by impeding the stress induced martensite (SIM) formation at the loading stage. On the other hand, the athermal α″ martensite, didn't significantly change superelasticity of β phase, (S ratio = 18%). The dissimilarity of α precipitate and α″ martensite in changing the superelastic behavior of the β phase was attributed to the their different mechanical and chemical stabilization potential. The TEM micrographs showed that the α precipitates hindered the growth of SIM needles, while the athermal α″ martensite was easily cut through by SIM. According to the EDS analysis, despite the presence of athermal α″ martensite, the segregation of β stabilizing elements from α precipitate to the β phase was traced; this was introduced as the second factor in spoiling the superelastic behavior of the β phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Orthopaedic implants and arthroplasty · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Development of thermo-mechanical processing for fabricating highly durable-type Ti–Nb–Ta–Zr rod for use in spinal fixation devices10.1016/j.jmbbm.2012.01.011 ↗
2. Corrosion behavior of thermo-mechanically processed biomedical Ti-29Nb-13Ta-4.6 Zr10.1016/j.jallcom.2017.04.319 ↗
3. Effect of Nb content and heat treatment temperature on superelastic properties of Ti–24Zr–(8–12) Nb–2Sn alloys10.1016/j.scriptamat.2014.09.029 ↗
4. Superelastic property induced by low-temperature heating of a shape memory Ti–24Nb–0.5 Si biomedical alloy10.1016/j.scriptamat.2014.06.009 ↗
5. In situ synchrotron X-ray diffraction study of the martensitic transformation in superelastic Ti-24Nb-0.5 N and Ti-24Nb-0.5 O alloys10.1016/j.actamat.2015.01.014 ↗
6. Room temperature superelastic responses of NiTi alloy treated by two distinct thermomechanical processing schemes10.1016/j.msea.2016.12.047 ↗
7. Influence of the microstructure on the pseudoelasticity of a metastable beta titanium alloy10.1016/j.msea.2005.01.022 ↗
8. Superelastic and shape memory properties of Ti x Nb3Zr2Ta alloys10.1016/j.jmbbm.2012.02.010 ↗
9. Influences of recovery and recrystallization on the superelastic behavior of a β titanium alloy made by suction casting10.1039/C4TB00474D ↗
10. Effect of precipitation phase on microstructure and superelasticity of cold-rolled beta titanium alloy during heat treatment10.1016/j.matdes.2009.03.042 ↗
11. Microstructure and mechanical behavior of a Ti–24Nb–4Zr–8Sn alloy processed by warm swaging and warm rolling10.1016/j.actamat.2012.01.003 ↗
12. A thermo-mechanical treatment to improve the superelastic performances of biomedical Ti–26Nb and Ti–20Nb–6Zr (at%) alloys10.1016/j.jmbbm.2011.06.003 ↗
13. Superelastic behavior of a β-type titanium alloy10.1016/j.jmbbm.2013.01.015 ↗
14. Effects of thermomechanical process on the microstructure and mechanical properties of a fully martensitic titanium-based biomedical alloy10.1016/j.jmbbm.2012.10.018 ↗
15. Improvement of superelastic performance of Ti-Nb binary alloys for biomedical applications10.1007/s11665-014-0876-0 ↗
16. Controlling reversible martensitic transformation in titanium alloys with high strength and low elastic modulus10.1016/j.scriptamat.2012.06.011 ↗
17. Aging response of the Young's modulus and mechanical properties of Ti-29Nb-13Ta-4.6 Zr for biomedical applications10.1007/s11661-003-0230-x ↗
18. The coupled temperature–strain rate sensitivity of Ti–29Nb–13Ta–4.6 Zr alloy10.1016/j.msea.2014.04.052 ↗
19. Cullity Deceased · 2001
20. Structural and functional properties of a semi equiatomic NiTi shape memory alloy processed by multi-axial forging10.1016/j.msea.2017.04.011 ↗
21. Mechanical properties enhancement in Ti–29Nb–13Ta–4.6 Zr alloy via heat treatment with no detrimental effect on its biocompatibility10.1016/j.matdes.2013.09.007 ↗
22. Effect of Nb on microstructural characteristics of Ti-Nb-Ta-Zr alloy for biomedical applications10.2320/matertrans.43.2964 ↗
23. Effect of aging on superelastic behaviors of a metastable β Ti-Mo-based alloy10.1007/s11665-011-9908-1 ↗
24. Formation of equiaxed α during ageing in a severely deformed metastable β Ti alloy10.1016/j.scriptamat.2016.07.012 ↗
25. Abnormal deformation behavior of oxygen-modified β-type Ti-29Nb-13Ta-4.6 Zr alloys for biomedical applications
26. Molar volumes of bcc, hcp, and orthorhombic Ti-base solid solutions at room temperature10.1016/j.calphad.2016.01.003 ↗
27. Microstructure and mechanical behavior of superelastic Ti–24Nb–0.5 O and Ti–24Nb–0.5 N biomedical alloys10.1016/j.jmbbm.2012.01.017 ↗
28. Shape memory properties of Ti–Nb–Mo biomedical alloys10.1016/j.actamat.2010.04.013 ↗
29. Effect of Sn addition on the microstructure and superelasticity in Ti–Nb–Mo–Sn alloys10.1016/j.jmbbm.2012.04.017 ↗
30. Characterization of the martensitic transformation in the superelastic Ti–24Nb–4Zr–8Sn alloy by in situ synchrotron X-ray diffraction and dynamic mechanical analysis10.1016/j.actamat.2015.01.039 ↗
31. Microstructure, elastic deformation behavior and mechanical properties of biomedical β-type titanium alloy thin-tube used for stents10.1016/j.jmbbm.2015.02.001 ↗
32. Deformation induced martensite and superelasticity in a β-metastable titanium alloy10.1016/S0921-5093(00)00921-7 ↗
33. Mechanics of superelasticity in Ti–30Nb–(8–10) Ta–5Zr alloy10.1016/j.actamat.2010.02.010 ↗
34. On the relative stability of orthorhombic and hcp phases of beryllium at high pressures
35. On the mechanism of superelasticity in gum metal10.1016/j.actamat.2008.11.013 ↗
36. Deformation-induced ω phase in modified Ti–29Nb–13Ta–4.6 Zr alloy by Cr addition10.1016/j.actbio.2013.04.032 ↗