journal article·2017-06Open access

Residual stress induced mechanical property enhancement in steel encapsulated light metal matrix composites

Sean Fudger, Dimitry Sediako, Prashant Karandikar, Chaoying Ni

Abstract

Abstract Macro hybridized systems consisting of steel encapsulated metal matrix composites (MMCs) were produced with the goal of creating a low cost/light weight system with enhanced mechanical properties. The systems exhibit the high strength and modulus commonly expected from steels and high specific stiffness and low density observed in MMCs. The material combination also works to alleviate the high density of steels and the poor ductility of the MMCs. Furthermore, a coefficient of thermal expansion (CTE) mismatch induced residual compressive stress method is utilized to improve the ductility of the MMCs. Systems consisting of an A36 or 304 stainless steel shell with an Al-SiC or Al-Al 2 O 3 shell are evaluated via neutron diffraction to quantify bulk residual stresses. The analysis shows variation in the measured strain due to steel thickness, difference in CTE between materials, and position within the composite. Improvements in ductility and yield stress are a result of these strains.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Microstructure and interface characteristics of B4C, SiC and Al2O3 reinforced Al matrix composites: a comparative study10.1016/S0924-0136(03)00815-X ↗
2. Characterization of 6061-T6 aluminum alloy to AISI 1018 steel interfaces during joining and thermo-mechanical conditioning10.1016/j.msea.2009.10.059 ↗
3. Investigation on mechanical properties of nano-Al2O3-reinforced aluminum matrix composites10.1177/0021998311401111 ↗
4. Studies on Al6061-SiC and Al7075-Al2O3 metal matrix composites
5. Analysis of stress-strain, fracture, and ductility behavior of aluminum matrix composites containing discontinuous silicon carbide reinforcement10.1007/BF02811679 ↗
6. Particulate reinforced metal matrix composites – a review10.1007/BF00544448 ↗
7. D.J. Lloyd, Particle reinforced aluminium and magnesium matrix composites, in: International Materials Reviews, vol. 39(1), 1994, pp. 1–23.10.1179/imr.1994.39.1.1 ↗
8. The effects of superimposed hydrostatic pressure on deformation and fracture: Part I. monolithic 6061 aluminum10.1007/BF02656629 ↗
9. The effects of superimposed hydrostatic pressure on deformation and fracture: Part II. particulate-reinforced 6061 composites10.1007/BF02656630 ↗
10. P. Karandikar et al., Processing of hybrid structures consisting of Al-based metal matrix composites (MMCs) with Metallic Reinforcement of Steel or Titanium, in: TMS, 2013, p. 20.
11. P. Karandikar, E.M. Klier, M. Watkins, B. Mcwilliams, M. Aghajanian, Al/Al2O3 Metal Matrix Composites (MMCs) and Macrocomposites for Armor Applications, 2013.
12. Prashant Karandikar · 2013 · 683
13. High strain rate response of aluminum 6092/B4C composites10.1016/j.msea.2004.05.027 ↗
14. S. Fudger, E. Klier, K. Prashant, B. Mcwilliams, C. Ni, Mechanical Properties of steel encapsulated metal matrix composites, in: Advanced Composites for Aerospace, Marine, and Land Applications ll, 2015, pp. 121–136.10.1007/978-3-319-48141-8_9 ↗
15. Holden · 2013
16. Separation of macroscopic, elastic mismatch and thermal expansion misfit stresses in metal matrix composite quenched plates from neutron diffraction measurements10.1016/S1359-6454(97)00209-7 ↗
17. Non-Destructive Testing – Standard Test Methods for Determining Residual Stresses by Neutron Diffraction, ISO/TS, vol. 7, 2005.
18. Residual stress analysis in aerospace MMC materials by neutron diffraction10.1007/s003390201746 ↗
19. Relaxation of thermal mismatch stress due to plastic deformation in an Al/SiCp metal matrix composite10.1016/S0921-5093(02)00204-6 ↗
20. Gauge volume effects in residual stress determination by neutron diffraction: the strength differential effect in metal matrix composites10.1016/j.msea.2006.04.064 ↗
21. An in situ HVEM study of dislocation generation at Al/SiC interfaces in metal matrix composites10.1007/BF02643944 ↗
22. Characterization of silicon carbide reinforced aluminum matrix composites10.3850/978-981-09-4587-9 ↗
23. F. Tang, The Microstructure-processing-property Relationships in an Al Matrix Composite System Reinforced by Al-Cu-Fe Alloy Particles, Retrospective Theses and Dissertations. Paper 818, Iowa State, 2004.10.2172/835313 ↗
24. M. C. T, Inc., Metal Matrix Composites Aluminum Alloy Reinforced with Ceramic Particles. [Online]. Available: mmmt.com, 2016.
25. Panadyne. [Online]. Available: 〈http://www.panadyne.com/〉 (Accessed September 2015).
26. CoorsTek. [Online]. Available: 〈https://www.coorstek.com/〉 (Accessed September 2015.
27. Observations on the effects of particulate size and superposed pressure on deformation of metal matrix composites10.1016/0956-716X(91)90347-4 ↗