journal article·2017-06

Plastic deformation behavior of spray formed superalloy FGH100

Hai-Xin Wu, Chang-Chun Ge, Qing-Zhi Yan, Min Xia, Tian Tian, Zhi-Li Zhu, Qi-Peng Hu

Publisher page

Abstract

Abstract Hot compression tests of hot isostatic pressed (HIPped) spray formed (SF) nickel-base superalloy were carried out in the temperature range of 1050–1150 °C at strain rates of 0.001–1 s −1 , between 10–70% of engineering strain, using a Gleeble-1500 thermal simulator. Thereafter, the flow curve was developed and the constitutive equation of flow stress during hot deformation was established. The results show that the flow stress decreases by increasing deformation temperature and decreasing strain rate. Processing maps were developed based on the data obtained using the principles of dynamic materials modeling. The microstructure of deformed samples was characterized using optical and electron microscopy. The processing maps exhibit the stability domain at the temperatures of 1140–1150 °C and strain rate of 0.01 s −1 , with a peak efficiency of approximately 50%. High deformation temperature and high strain rate are conducive to the occurrence of dynamic recrystallization. The activation energy of the new Ni-Cr-Co based SF superalloy FGH100 was found to be 866.7 kJ/mol. Besides, the experimental results verify the hyperbolic sine model including strain variable, reflecting the changing law of flow stress during the hot deformation process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Metal Alloys Wear and Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Research in Spray Forming Technology and its Applications in Metallurgy10.1016/S0924-0136(03)00098-0 ↗
2. Hot deformation characteristics and processing map of nickel-based C276 superalloy10.1016/j.jallcom.2014.10.118 ↗
3. Microstructure of long-term aged IN617 Ni-base superalloy10.1007/s11661-008-9618-y ↗
4. Microstructural evolution of a Ni-based superalloy (617B) at 700C studied by electron microscopy and atom probe tomography10.1016/j.actamat.2011.11.020 ↗
5. Thermal degradation behavior of Inconel 617 Alloy10.3365/met.mat.2008.12.739 ↗
6. Oxidation behaviour of an Alloy 617 in very high temperature air and helium environments10.1016/j.ijpvp.2007.11.010 ↗
7. Hot deformation characteristics and processing map analysis for Nickel-based corrosion resistant alloy10.1016/j.jallcom.2014.10.034 ↗
8. Hot deformation behavior and processing map of a γ‘hardened nickel-based superalloy10.1016/j.msea.2014.03.015 ↗
9. Plastic deformation behavior and processing maps of a Ni-based superalloy10.1016/j.matdes.2014.09.062 ↗
10. Processing map for hot working of Inconel 718 alloy10.1016/j.jmatprotec.2010.10.015 ↗
11. Microstructure evolution and mechanical properties of disk superalloy under multiplex heat treatment10.1016/j.msea.2016.02.038 ↗
12. Microstructure evolution during dynamic recrystallization of hot deformed superalloy 71810.1016/j.msea.2007.09.008 ↗
13. Flow behavior and numerical simulation of Spray Formed FGH95 superalloy under hot compression
14. Hot deformation characteristics and processing map of nickel-based C276 superalloy10.1016/j.jallcom.2014.10.118 ↗
15. Dynamic and metadynamic recrystallization of Hastelloy X superalloy10.1007/s10853-008-2604-3 ↗
16. Hot working characteristics of nickel-base superalloy 740H during compression10.1016/j.msea.2012.12.077 ↗
17. Hot deformation behavior of a spray formed superalloy10.1016/j.jmatprotec.2007.11.089 ↗
18. Flow Behavior of Superalloy 945 During High Temperature Deformation
19. NiTi alloy hot compress test data correction and constitutive equation
20. The microstructure evolution and nucleation mechanisms of dynamic recrystallization in hot-deformed Inconel 625 superalloy10.1016/j.matdes.2010.07.040 ↗
21. Flow behavior and micro-structures of superalloy 718 during high temperature deformation10.1016/j.msea.2008.07.046 ↗
22. Study on the dynamic and static softening phenomena in Al-6Mg alloy during two-stage deformation through interrupted hot compression test10.1016/j.measurement.2015.08.033 ↗
23. Microanalysis of crystallographic characteristics and structural transformations in SPDed Al-Mn-Si alloy by dual-straining10.1016/j.jallcom.2016.12.086 ↗
24. Study on the effect of post-annealing on the microstructural evolutions and mechanical properties of rolled CGPed Aluminum-Manganese-Silicon alloy10.1016/j.msea.2016.10.054 ↗
25. Hot deformation behavior and processing map of a typical Ni-based superalloy10.1016/j.msea.2013.09.049 ↗
26. The kinetics of meta dynamic re-crystallization in a Ni-Cr-Mo-basedsuperalloyHastelloyC-27610.1007/s11665-015-1756-y ↗
27. About the possibility o fgrain boundary engineering viahot-working in a nickel-base superalloy10.1016/j.scriptamat.2010.02.019 ↗
28. Grainboundary character distribution during the post-de-formation recrystallization of Incoloy800 Hat elevated temperature10.1016/j.matlet.2015.10.034 ↗
29. Dynamicre-crystallization behavior of a γ‘-hardened nickel-based superalloy during hot deformation10.1016/j.jallcom.2014.11.056 ↗
30. Characteristics of meta dynamic re-crystallization of Nimonic 80A superalloy10.1557/jmr.2015.7 ↗