The role of phosphorus in precipitation behavior and its effect on the creep properties of alumina-forming austenitic heat-resistant steels
Source abstract
Abstract
Abstract The precipitation behavior and creep properties of lower phosphorus (P) alumina-forming austenitic (AFA LP ) heat-resistant steel were investigated and compared to those of AFA. The creep rupture time and hardness of the investigated steels were improved with the decrease of the P content. The TEM and EELS analyses confirmed an enhanced P concentration in the M 23 C 6 precipitates along the grain boundaries. The P promoted the precipitation of M 23 C 6 and also suppressed the precipitation of secondary NbC in the earlier stage of aging. The creep rupture time of AFA became shorter compared to AFA LP due to the reduction in the fraction of secondary NbC which acts as a dominant strengthening phase during creep. The suppression of secondary NbC precipitation by P increased the Nb content in the austenite matrix and accelerated the precipitation of the Laves phase in the intermediate stage. However, the difference in Vickers hardness caused by Laves phase was not large in both alloys because the volume fraction of Laves phase strongly depended on the nominal content of Mo rather than Nb. The Vickers hardness at the earlier stage is determined by the precipitation of secondary NbC and the difference of the hardness maintained at the final stage. Thus, it is found that P degrades the creep rupture time and P is a detrimental element in terms of creep and precipitation hardening in AFA steels.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Material Properties and Applications · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Creep-resistant, Al2O3-forming austenitic stainless steels10.1126/science.1137711 ↗
2. Alumina-forming austenitic stainless steels strengthened by laves phase and MC carbide precipitates10.1007/s11661-007-9319-y ↗
3. The development of alumina-forming austenitic stainless steels for high-temperature structure use10.1007/s11837-008-0083-2 ↗
4. Overview of strategies for high-temperature creep and oxidation resistance of alumina-forming austenitic stainless steels10.1007/s11661-010-0295-2 ↗
5. Development of L12-ordered Ni3(Al,Ti)-strengthened alumina-forming austenitic stainless alloys10.1016/j.scriptamat.2013.09.005 ↗
6. M.A.Pint, S.Dryepondt, M.P.Brady, Y.Yamamoto, Evaluation of Commercial and Next Generation Alumina-Forming Austenitic Foil for Advanced Recuperators, In: Proceedings of ASME Turbo Expo 2013: Turbine Technical Conference and Exposition GT2013, June 3-7, 2013, San Antonio, Texas, USA, GT2013-9494010.1115/GT2013-94940 ↗
7. Co-optimization of wrought alumina-forming austenitic stainless steel composition ranges for high-temperature creep and oxidation/corrosion resistance10.1016/j.msea.2013.10.014 ↗
8. Effects of minor alloy additions and oxidation temperature on protective alumina scale formation in creep-resistant austenitic stainless steels10.1016/j.scriptamat.2007.08.032 ↗
9. Composition, microstructure, and water vapor effects on internal/external oxidation of alumina-forming austenitic stainless steels10.1007/s11085-009-9161-2 ↗
10. Effect of alloying additions on phase equilibria and creep resistance of alumina-forming austenitic stainless steels10.1007/s11661-009-9886-1 ↗
11. Evaluation of Mn substitution for Ni in alumina-forming austenitic stainless steels10.1016/j.msea.2009.06.043 ↗
12. Increasing the upper temperature oxidation limit of alumina forming austenitic stainless steels in air with water vapor10.1007/s11085-011-9237-7 ↗
13. M.H. Jang, J. Moo, J.Y. Kang, H.Y. Ha, B.G. Choi, T.H. Lee, C. Lee, Effect of tungsten addition on high-temperature properties and microstructure of alumina-forming austenitic heat-resistant steels, 647, 2015, pp. 163–16910.1016/j.msea.2015.09.018 ↗
14. The negative effect of Zr addition on the high temperature strength in alumina-forming austenitic stainless steels10.1016/j.matchar.2013.10.029 ↗
15. Investigation of the abnormal effects of phosphorus on mechanical properties of INCONEL718 superalloy10.1016/S0921-5093(99)00153-7 ↗
16. Sulfur and phosphorus segregation to creep cavities and grain boundaries in 304 SS10.1016/0036-9748(81)90019-3 ↗
17. Compositional effects on the creep ductility of a low alloy steel10.1007/BF02655098 ↗
18. Effects of P addition on creep of 1Cr-Mo-V steels10.1179/030634583790420718 ↗
19. W.R. Sun, H.R. Guan, M.Wang, Z.G. Wang, L.F. Huang, Z.Q. Hu, In: E.A. Loria (Ed.) Proc. 6th Int. Symp. on Superalloys 718, 625, 706 and Derivatives, TMS, Warrendale, PA, 2005, p. 39910.7449/2005/Superalloys_2005_399_407 ↗
20. J. Heaney, W. Buttrill, J. Russell, P. Mrowczynski, In: E.A. Loria (Ed.), Proc. 6th Int. Symp. On Superalloys 718, 625, 706 and Derivatives, TMS, Warrendale, PA, 2005, p. 68710.7449/2005/Superalloys_2005_687_698 ↗
21. Precipitation sequence and its effect on age hardening of alumina-forming austenitic stainless steels10.1016/j.msea.2015.08.005 ↗
22. Martin · 1998
23. Theory of growth of spherical precipitates from solid solution10.1063/1.1698258 ↗
24. Johnson · Trans. Am. Inst. Min. Metall. Eng. · 1939 · 135 · 416
25. Kinetics of phase change. III. Granulation, phase change, and microstructure10.1063/1.1750872 ↗
26. Quantification of age hardening in an Fe-12Ni-6Mn alloy10.1016/S1359-6462(97)00006-7 ↗
27. Influence of phosphorus on the nucleation of M23C6 carbides in austenitic stainless steels10.1179/030634568790443134 ↗
28. The effect of phosphorus additions and cooling rate on the precipitation of M23C6 in austenite10.1179/msc.1974.8.1.337 ↗