journal article·2016-06

Correlation between microstructure and mechanical properties of active brazed Cf/SiC composite joints using Ti-Zr-Be

Dongyu Fan, Jihua Huang, Xiaowei Sun, Jian Yang, Shuhai Chen, Xingke Zhao

Publisher page

Abstract

Abstract C f /SiC composites were successfully active brazed by Ti-Zr-Be filler foil. The microstructure of the brazed joints was investigated by auger electron spectroscopy (AES) and scanning electron microscope (SEM) equipped with energy dispersive spectrometer (EDS). The phase structure was determined by X-ray diffraction (XRD). The mechanical property was measured by mechanical testing machine. The results indicate that the brazed joint consisted of TiC, Ti 3 SiC 2 , ZrC, Be 2 C, Be 17 Ti 2 and Ti-based solid solution (β-Ti). TiC+Ti 3 SiC 2 /ZrC+Ti(Zr)-Si-C+Be 2 C reaction layers were formed near C f /SiC composite side while the reaction layer of β-Ti+Be 17 Ti 2 +Ti(Zr) 3 SiC 2 with a small amount of ZrC, TiSi 2 , Be 2 C particles was formed in the center of the joint. With the increase of the brazing temperature or holding time, the amount of β-Ti compound in the interlayer decreased gradually while the thickness of reaction layer increased gradually. When the brazing temperature was 1000 °C and the holding time was 15 min, the maximum room temperature shear strength of the brazed joint can be achieved, which was 136.63 MPa. The joints with the parameters of 950 °C/30 min, 1000 °C/15 min and 1050 °C/5 min could resist a pressure of 5 MPa at 1200 °C for 5 min
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Ishikawa · Science · 1998 · 282 · 129510.1126/science.282.5392.1295 ↗
2. Jian · Mater. Sci. Eng. A · 2005 · 390 · 15410.1016/j.msea.2004.07.064 ↗
3. Windhorst · Mater. Des. · 1997 · 18 · 1110.1016/S0261-3069(97)00024-1 ↗
4. L. Jerry, NASA Glenn’s Research and Technology Reports, 2003.
5. Merola · J. Nucl. Mater. · 2002 · 307–311 · 1523
6. Schmidt · Acta Astronaut. · 2004 · 9 · 40910.1016/j.actaastro.2004.05.052 ↗
7. Guo · Aerosp. Mater. Technol. · 1995 · 1
8. Salvo · J. Am. Ceram. Soc. · 1997 · 80 · 12510.1111/j.1151-2916.1997.tb02811.x ↗
9. Srivastava · Int. J. Adhes. Adhes. · 2003 · 23 · 5910.1016/S0143-7496(02)00082-9 ↗
10. Isola · J. Eur. Ceram. Soc. · 1998 · 18 · 101710.1016/S0955-2219(97)00203-3 ↗
11. Li · Int. J. Mod. Phys. B · 2003 · 17 · 177710.1142/S0217979203019654 ↗
12. Xiong · Scr. Mater. · 2006 · 55 · 15110.1016/j.scriptamat.2006.03.050 ↗
13. S.P. Dadras, J.D. Buckley, Proccedings of the Fourth Conference on Meal matrix, Carbon, and Ceramic Matrix Composites, NASA, 1990, pp. 443–454.
14. Xiong · J. Mater. Eng. Perform. · 2011 · 20 · 108410.1007/s11665-010-9732-z ↗
15. Brochu · Mater. Sci. Eng. A · 2004 · 374 · 3410.1016/j.msea.2003.10.276 ↗
16. Xiong · Mater. Sci. Eng. A · 2010 · 527 · 109610.1016/j.msea.2009.09.024 ↗
17. Gurdial · Ceram. Int. · 2007 · 33 · 103310.1016/j.ceramint.2006.03.010 ↗
18. Qin · Mater. Sci. Eng. A · 2007 · 454–455 · 32210.1016/j.msea.2006.11.056 ↗
19. Cui · Mater. Sci. Eng. A · 2013 · 562 · 20310.1016/j.msea.2012.11.031 ↗
20. Xiong · Scri. Mater. · 2006 · 55 · 15110.1016/j.scriptamat.2006.03.050 ↗
21. Chen · J. Mater. Eng. · 2010 · 329 · 27
22. Jimenez · J. Mater. Eng. Perform. · 2012 · 21 · 68310.1007/s11665-012-0183-6 ↗
23. Tong · Sci. Eng. Compos. Mater. · 2006 · 13 · 3110.1515/SECM.2006.13.1.31 ↗
24. Xiong · Scri. Mater. · 2007 · 58 · 922
25. Liu · Sci. Technol. Weld. Join. · 2011 · 16 · 19310.1179/1362171810Y.0000000021 ↗
26. Cui · Compos. Sci. Technol. · 2014 · 97 · 1910.1016/j.compscitech.2014.03.021 ↗
27. Sekulic · 2013
28. Hari Kumar · J. Alloy. Compd. · 1994 · 206 · 12110.1016/0925-8388(94)90019-1 ↗
29. Wiest · Acta Mater. · 2008 · 56 · 262510.1016/j.actamat.2008.02.001 ↗