Low cycle thermomechanical fatigue of reactor steels: Microstructural and fractographic investigations
Source abstract
Abstract
Abstract The fatigue life of the structural materials 15Ch2MFA (CrMoV-alloyed ferritic steel) and 08Ch18N10T (CrNi-alloyed austenitic steel) of a VVER-440 reactor pressure vessel were investigated under fully reversed total strain controlled low cycle fatigue tests. The measurements were carried out in isothermal conditions at 260 °C and with thermal-mechanical conditions in the range 150–270 °C using a GLEEBLE-3800 servo-hydraulic thermal-mechanical simulator. The low cycle fatigue results were evaluated with the Coffin–Manson law, and the parameters of the Ramberg–Osgood stress–strain relation were investigated. Fracture mechanics behavior was observed using scanning electron microscopic analysis of the crack shapes and fracture surfaces. Crack propagation was assessed in relation to the actual crack size and the loading level. Interrupted fatigue tests were also carried out to investigate the kinetics of the fatigue evolution of the materials. Microstructural evaluation of the samples was performed using light, scanning and transmission electron microscopy as well as X-ray diffraction, and measurement of dislocations was completed using TEM and XRD. The course of dislocation density in relation to cumulative usage factor was similar for both steels. However, the nature and distribution of dislocations were different in the individual steels and this resulted in different mechanical behaviors. The nature of the fracture surfaces of both steels appeared similar despite differences in dislocation arrangement. The distances between striation lines initially increased with increasing crack length and then became saturated. The low cycle fatigue behavior investigated can provide a reference for the remaining life assessment and lifetime extension analysis of nuclear power plant components.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Nuclear Materials and Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Evaluation of the reactor pressure vessel steels by positron annihilation10.1016/j.jnucmat.2013.08.028 ↗
2. Thermomechanical fatigue evaluation and life prediction of 316L(N) stainless steel10.1016/j.ijfatigue.2008.03.019 ↗
3. Conducting thermomechanical fatigue test in air at light water reactor relevant temperature intervals10.1016/j.jnucmat.2011.05.025 ↗
4. Monitoring of low-cycle fatigue degradation in X6CrNiTi18-10 austenitic steel10.1016/S0022-3115(01)00547-5 ↗
5. Thermal-mechanical low cycle fatigue under creep fatigue interaction on type 304 stainless steel
6. Fekete · J. Nucl. Mater. · 2015
7. Fatigue at high temperature – Prediction and interpretation10.1243/PIME_PROC_1974_188_014_02 ↗
8. Low cycle fatigue behaviour of a Cr–Mo–V matrix-type high-speed steel used for cold forging10.1016/j.matdes.2012.08.052 ↗
9. Low cycle fatigue behavior of Cr–Mo–V low alloy steel used for railway brake discs10.1016/j.matdes.2013.10.093 ↗
10. Assessment of the WWER-440/V-213 reactor condition10.1016/j.ijpvp.2005.11.007 ↗
11. Keh · 1963 · 231
12. Effects of foil thickness on measurement of grain boundary segregation with FEG-TEM/EDS in austenitic stainless steels10.1093/oxfordjournals.jmicro.a023580 ↗
13. Hirsch · 1965 · 423
14. Ungár · Acta Mater. · 1998 · vol. 46 · 369310.1016/S1359-6454(98)00001-9 ↗
15. Warren · 1996
16. Wilkens · 1970 · vol. II · 1195
17. Ungár · J. Appl. Cryst. · 1999 · 32 · 99210.1107/S0021889899009334 ↗
18. Ungár · Phys. Stat. Sol. · 1999 · a147 · 42510.1002/(SICI)1521-396X(199902)171:2<425::AID-PSSA425>3.0.CO;2-W ↗
19. Ribárik · Mater. Sci. Eng. · 2010 · vol. A528 · 11210.1016/j.msea.2010.08.059 ↗
20. Hinds · 1982
21. W. Ramberg, W.R. Osgood, Description of Stress–Strain Curves by Three Parameters NACA Technical Note No. 902 1943.
22. Dislocation density and sub-grain size evolution of 2CrMoNiWV during low cycle fatigue at elevated temperatures10.1016/j.actamat.2011.12.031 ↗
23. Kettunen · 2003 · 16–18 · 304
24. Persistant slip bands in fatigued face-centered and body-centered cubic crystals.
25. Cottrell · 1949 · 1
26. Dislocation motions and the yield strength of solids
27. Dislocation velocity measurements in high purity molybdenum10.1016/0001-6160(68)90020-5 ↗
28. Microstructural and alloy influence on the low-temperature strengthening behavior of commercial steels used as plates10.1016/j.msea.2010.04.092 ↗
29. Cyclic hardening and saturation behavior of copper single crystals10.1016/0025-5416(78)90174-X ↗