Effect of local strain distribution on concurrent microstructural evolution during superplastic deformation of Al–Li 8090 alloy
Source abstract
Abstract
Abstract Superplastic deformation of Al–Li 8090 alloy was carried out to study the effect of local strain developed on the microstructural variation along the gauge length of tensile specimens. For this, separate specimens were deformed to failure at a constant temperature of 530 °C and at the strain rates within the superplastic regime. The strain distribution was found to be non-uniform with more deformation towards fracture tip and less towards the shoulder section of specimens. The grain size was found to decrease with increase in local strain whereas cavity size and cavity volume fraction were found to increase. The cavity growth in longitudinal direction is suggested to be controlled by power law but the same in transverse direction is controlled by diffusional process. A model is proposed for cavity nucleation on the basis of inhomogeneity in microstructure and its implication in deformation mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Langdon · Met. Sci. · 1982 · 16 · 17510.1179/030634582790427208 ↗
2. Kashyap · Res. Mechanica · 1986 · 17 · 293
3. Jiang · J. Mater. Sci. · 1994 · 29 · 549910.1007/BF00349941 ↗
4. Quing · Acta Metall. Mater. · 1992 · 40 · 175310.1016/0956-7151(92)90118-X ↗
5. Han · Mater. Sci. Eng. · 1999 · A266 · 27610.1016/S0921-5093(99)00002-7 ↗
6. Maehara · Metall. Trans. A · 1987 · 18A · 66310.1007/BF02649482 ↗
7. Pu · Metall. Mater. Trans. A · 1995 · 26A · 115310.1007/BF02670612 ↗
8. Blackwell · Metall. Trans. A · 1993 · 24A · 108510.1007/BF02657239 ↗
9. Fan · Mater. Sci. Technol. · 2001 · 17 · 43910.1179/026708301101510014 ↗
10. Chen · Mater. Sci. Eng. · 2001 · A298 · 23510.1016/S0928-4931(00)00193-4 ↗
11. Troeger · Mater. Sci. Eng. · 2000 · A277 · 10210.1016/S0921-5093(99)00543-2 ↗
12. Shin · Mater. Sci. Eng. · 1999 · A268 · 5510.1016/S0921-5093(99)00116-1 ↗
13. Kannan · Scr. Metall. · 1997 · 38 · 29910.1016/S1359-6462(97)00482-X ↗
14. Quing · Scr. Metall. Mater. · 1991 · 25 · 38710.1016/0956-716X(91)90198-A ↗
15. Mohamed · Acta Metall. · 1981 · 29 · 91110.1016/0001-6160(81)90133-4 ↗
16. Mahidhara · Scr. Metall. Mater. · 1995 · 32 · 148310.1016/0956-716X(95)00192-X ↗
17. Chokshi · Acta Mater. · 1989 · 37 · 71510.1016/0001-6160(89)90255-1 ↗
18. Wang · J. Mater. Sci. · 1999 · 34 · 269510.1023/A:1004677421922 ↗
19. Sagradi · Acta Mater. · 1998 · 46 · 385710.1016/S1359-6454(98)00087-1 ↗
20. Seindensticker · Scr. Metall. · 1998 · 38 · 109110.1016/S1359-6462(98)00004-9 ↗
21. Miller · Scr. Metall. · 1980 · 14 · 17910.1016/0036-9748(80)90090-3 ↗
22. Shei · J. Mater. Sci. · 1978 · 13 · 108410.1007/BF00544704 ↗
23. Hancock · Met. Sci. · 1976 · 10 · 31910.1016/0036-9748(76)90084-3 ↗
24. A.K. Mukherjee, Superplasticity in metals, ceramics and intermetallics, in: Plastic Deformation and Fracture of Materials, H. Mughrabi (Vol. Ed.), Materials Science and Technology, A Comprehensive Treatment, Vol. 6, R.W. Cahn, P. Haasen, E.J. Kramer (Eds.), VCH Verlagsgesellschaft GmbH, D-6940 Weinheim, 1993, pp. 407–460.
25. Kobayashi · Mater. Sci. Forum · 1999 · 304–306 · 59110.4028/www.scientific.net/MSF.304-306.591 ↗
26. Pandey · J. Mater. Sci. · 1988 · 23 · 350910.1007/BF00540488 ↗
27. Chokshi · Mater. Sci. Eng. · 1989 · A110 · 4910.1016/0921-5093(89)90156-1 ↗
28. Chokshi · Mater. Sci. Forum · 1997 · 233–234 · 8910.4028/www.scientific.net/MSF.233-234.89 ↗
29. Kashyap · J. Mater. Sci. · 1985 · 20 · 266110.1007/BF00553028 ↗
30. Chokshi · Metall. Trans. A · 1988 · 19A · 162110.1007/BF02674038 ↗
31. Ghosh · Acta Metall. · 1986 · 34 · 44710.1016/0001-6160(86)90080-5 ↗
32. Bussiba · Mater. Sci. Eng. · 2001 · A302 · 5610.1016/S0921-5093(00)01354-X ↗