journal article·2003-06

Structural refinement and strengthening of an Fe–Mn–Si–Cr–Ni shape memory alloy by high-speed rolling

N. Yoneyama, T. Setoda, S. Kumai, A. Sato, M. Komatsu, M. Kiritani

Materials Science and Engineering: A· Volume 350· Issue 1-2
Publisher page

Abstract

Abstract The shape recovery under different opposing stress conditions and the various microstructures obtained have been examined following high-speed rolling. An iron-based shape memory alloy that can hardly be rolled at a high strain rate is shown to be capable of being rolled down to 50% of its original thickness by single pass. The shape recovery under the opposing stress applied during reverse transformation is found to increase notably as a result of structural refinement induced by high-speed rolling. In these tests, the specimens were twinned or transformed into hcp and bcc nanophases by the high-speed rolling performed at strain rates as high as ∼104 s−1. The current study emphasizes the contribution of the resultant structural refinement to the strengthening of the shape memory alloy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Kolsky · Proc. Phys. Soc. (London) · 1949 · 62B · 67610.1088/0370-1301/62/11/302 ↗
2. Sakui · 1964 · 303
3. von Karman · J. Appl. Phys. · 1950 · 21 · 98710.1063/1.1699544 ↗
4. Taylor · J. Inst. Civil Eng. (London) · 1946 · 26 · 48610.1680/ijoti.1946.13699 ↗
5. Kiritani · Phil. Mag. Lett. · 1999 · 79 · 79710.1080/095008399176616 ↗
6. Shimomura · Comput. Mater. Sci. · 1999 · 14 · 9710.1016/S0927-0256(98)00079-2 ↗
7. Tomota · Acta Mater. · 1998 · 46 · 141910.1016/S1359-6454(97)00285-1 ↗
8. Otsuka · ISIJ Int. · 1990 · 30 · 67410.2355/isijinternational.30.674 ↗
9. Tsuzaki · Mater. Trans. JIM · 1993 · 33 · 26310.2320/matertrans1989.33.263 ↗
10. Watanabe · J. Mater. Sci. · 1993 · 28 · 150910.1007/BF00363341 ↗
11. Y. Moriya, H. Suzuki, S. Hashizume, T. Sampei, I. Kozasu, Proceedings of the International Conference on Stainless Steels, ISIJ, 1991, Chiba, 1991, pp. 527.
12. Shiming · Scr. Metal. Mater. · 1991 · 25 · 261310.1016/0956-716X(91)90513-Z ↗
13. Guenin · J. Phys. · 1995 · C8 · 433
14. Matsumura · ISIJ Int. · 1996 · 36 · 110310.2355/isijinternational.36.1103 ↗
15. A. Sato, T. Masuya, M. Morishita, S. Kumai, A. Inoue, Proceedings of the International Symposium and Exhibition on Shape Memory Materials, Kanazawa, Japan, 1999, Mater. Sci. Forum, 327–328 (2000) 223–226.10.4028/www.scientific.net/MSF.327-328.223 ↗
16. Masuya · Mater. Sci. Forum · 2000 · 327–328 · 26710.4028/www.scientific.net/MSF.327-328.267 ↗
17. Sato · Acta Metall. · 1901 · 30 · 1982
18. Sato · Acta Metall. · 1984 · 32 · 53910.1016/0001-6160(84)90065-8 ↗
19. Inagaki · Z. Metallkd. · 1992 · 83 · 304
20. Hoshino · Mater. Trans. JIM · 1992 · 33 · 25310.2320/matertrans1989.33.253 ↗
21. Yoneyama · Radiat. Effects Defects Solids · 2002 · 157 · 10910.1080/10420150211401 ↗
22. Y. Yamamoto, Ph.D. thesis, Tokyo Institute of Technology, 1999.
23. Sato · Acta Metall. · 1984 · 34 · 28710.1016/0001-6160(86)90199-9 ↗
24. Sato · 1979 · 183
25. K. Kondo, A. Sawaoka, S. Saito, High Pressure Science and Technology, Proceedings of the Sixth AIRAPT Conference, 1979, pp. 905–909.
26. T. Nozaki, M. Doyama, Y. Kogure, in press.
27. Y. Shimomoura, M. Kiritani, I. Mukouda, in press.
28. Borgers · Acta Metall. · 1974 · 22 · 31310.1016/0001-6160(74)90170-9 ↗
29. Kato · Acta Metall. · 1978 · 26 · 60510.1016/0001-6160(78)90112-8 ↗
30. Ishikawa · Phil. Mag. · 1991 · 64 · 38710.1080/01418619108221193 ↗
31. Dieter · 1962 · 279