journal article·2004-10

Spray deposition using impulse atomization technique

N. Ellendt, R. Schmidt, J. Knabe, H. Henein, V. Uhlenwinkel

Publisher page

Abstract

Abstract A novel technique, impulse atomization, has been used for spray deposition. This single fluid atomization technique leads to different spray characteristics and impact conditions of the droplets compared to gas atomization technique which is the common technique used for spray deposition. Deposition experiments with a Cu–6Sn alloy were conducted to evaluate the appropriateness of impulse atomization to produce dense material. Based on these experiments, a model has been developed to simulate the thermal history and the local solidification rates of the deposited material. A numerical study shows how different cooling conditions affect the solidification rate of the material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fluid Dynamics and Heat Transfer · Particle Dynamics in Fluid Flows · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. U. Forsberg, A. Wilson, L. Nylöf, M. Yaman, in: Proceedings of the ICSF III, Cardiff, UK, September 1996, pp. 123–130.
2. K. Hummert et al., in: Proceedings of the P/M Aluminium and Light Alloys for Automotive Applications Conference, MPIF, Princeton, NJ, 1998.
3. K. Hummert, in: K. Bauckhage, V. Uhlenwinkel (Eds.), Kolloquium Spray Forming, Band 4, Universität Bremen, 1999, pp. 21–44 (ISBN3-88722-444-X).
4. H.R. Müller, S. Hansmann, K. Ohla, in: Proceedings of the Spray Deposition and Melt Atomization, SDMA 2000, Bremen, Germany, 24–26 June 2000, pp. 205–218.
5. C. Spiegelhauer, in: K. Bauckhage, V. Uhlenwinkel (Eds.), Colloquium Spray Forming, vol. 5, University of Bremen, 2001, pp. 63–68 (ISBN 3-88722-508-2).
6. Leatham · JOM · 1999 · 51 · 410.1007/s11837-999-0234-0 ↗
7. D.D. Leon, R.L. Kozarek, D.K. Denzer, in: K.P. Cooper, I.A. Anderson, S.D. Ridder, F.S. Biancaniello (Eds.), Liquid Metal Atomization: Fundamentals and Practice, TMS, Warrendale, PA, 2000, pp. 115–130.
8. H. Henein, in: K.P. Cooper, I.E. Anderson, S.D. Ridder, F.S. Biancaniello (Eds.), Liquid Metal Atomization: Fundamentals and Practice, TMS, Warrendale, PA, 2000, pp. 133–144.
9. H. Henein, V. Uhlenwinkel, in: V. Arnold, et al. (Eds.), Advances in Powder Metallurgy and Particulate Materials, MPIF 2002, pp. 4-218–4-427.
10. Wiskel · CMQ · 2002 · 41 · 9710.1179/cmq.2002.41.1.97 ↗
11. H.D. Baer, K. Stephan, Wärme und Stoffübertragung, Springer-Verlag, 1994.10.1007/978-3-662-10839-0 ↗
12. R. Schmidt, M. Komarnisky, Unpublished Research, University of Bremen, 2002.10.1007/978-3-322-93249-5_10 ↗
13. DIN EN 6018, Prüfverfahren für metallische Werkstoffe Bestimmung der Dichte nach dem Auftriebsverfahren, Beuth Verlag, Berling, 1990.
14. A.V. Freyberg, H. Henein, V. Uhlenwinkel, Mater. Trans. B (2003) (in press).