Stress distribution in mechanically surface treated Ti-2.5Cu determined by combining energy-dispersive synchrotron and neutron diffraction
Source abstract
Abstract
Abstract Mechanical surface treatments such as shot peening (SP) or ball-burnishing (BB) induce plastic deformation close to the surface resulting in work-hardening and compressive residual stresses. It enhances the fatigue performance by retarding or even suppressing micro-crack growth from the surface into the interior. SP and BB were carried out on a solution heat treated (SHT) Ti-2.5Cu. The investigations of compressive and balancing tensile residual stresses need a combination of energy-dispersive synchrotron (ED) and neutron diffraction. Essential for the stress distribution is the stress state before surface treatments which was determined by neutron diffraction. Results show that the maximum compressive stress and its depth play an important role to improve the fatigue performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Metal and Thin Film Mechanics · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Ludian · J. Mat. Res · 2006 · 97 · 1425
2. L. Wagner, M. Wollman, in: Proc. of the 10th Int. Conference on Shot Peening, K. Tosha (Eds.), Tokyo, Japan, 2008, pp. 355-362.
3. T. Ludian, J. Atoura, L. Wagner, in: Proc. of the 10th Int. Conference on Shot Peening, edited by K. Tosha, Tokyo, Japan, 2008, pp. 375-380.
4. E. Maawad, S. Yi, H.-G. Brokmeier, L. Wagner, in: Proc. of the 10th Int. Conference on Shot Peening, by K. Tosha, Tokyo, Japan, 2008, pp. 499-504.
5. Menig · Scr. Mater · 2001 · 45 · 97710.1016/S1359-6462(01)01063-6 ↗
6. S. Clitheroe, M. Turski, A. Evans, J. Kelleher, D. Hughes, P. Withers, in: Proc. Of the 10th Int. Conference on Shot Peening, K. Tosha (Eds.), Tokyo, Japan, 2008, pp. 47-50.
7. A. N. Ezeilo, G. A. Webster, P. S. Webster, L. Castex, in: Proc. of the 5th Int. Conference of Residual Stresses, T. Ericsson, M. Oden and A. Andersson (Eds.), Inst. of Tech., Linkopings Universitet, Sweden, 1997, pp. 726-731.
8. Rotundo · Procedia Engineering · 2009 · 1 · 22110.1016/j.proeng.2009.06.052 ↗
9. Jamesa · Engineering Fail. Anal · 2007 · 14 · 38410.1016/j.engfailanal.2006.02.011 ↗
10. Pyzalla · Phys. B · 2000 · 276–278 · 83310.1016/S0921-4526(99)01621-X ↗
11. E. Maawad, H.-G. Brokmeier, L. Wagner, Ch. Genzel, in: Proc. of the 9th Int.Conference on Prod. Engineering, Des. and Control, M. El-Hofy (Eds.), Alexandria, Egypt, 2009, e-paper code 135.
12. Moore · SAE Trans. · 1958 · 66 · 340
13. Genzel · J. Nucl. Instrum. Methods A · 2001 · 467–468 · 125310.1016/S0168-9002(01)00647-7 ↗
14. Kroener · Z. Phys · 1958 · 151 · 50410.1007/BF01337948 ↗
15. Hofmann · Phys. B · 2006 · 385–386 · 103510.1016/j.physb.2006.05.331 ↗
16. Keller · Mater. Sci. And Engineering A · 2004 · 373 · 3310.1016/j.msea.2004.01.032 ↗