journal article·2008-03

Microstructure and mechanical properties of powder-injection-molded products of Cu-based amorphous powders and Fe-based metamorphic powders

Chang Kyu Kim, Chang-Young Son, Dae Jin Ha, Tae Sik Yoon, Sunghak Lee, Nack J. Kim

Materials Science and Engineering: A· Volume 476· Issue 1-2
Publisher page

Abstract

Abstract In the present study, a powder-injection molding (PIM) process was applied to Cu-based amorphous alloy powders and Fe-based metamorphic alloy powders, and microstructure, hardness, and wear resistance of the PIM products were analyzed and compared with those of conventional PIM stainless steel products. Injection-molded Cu-based amorphous powders were hardly sintered even at temperatures just below the melting temperature as most of amorphous phases were replaced by crystalline phases. When Fe-based metamorphic powders were injection-molded and then sintered at 1200 °C, completely densified products with almost no pores were obtained. They contained 34 vol.% of (Cr,Fe) 2 B borides dispersed in the austenitic matrix without amorphous phases. Since these (Cr,Fe) 2 B borides were very hard and thermally stable, hardness, high-temperature hardness, and wear resistance of the PIM products of Fe-based metamorphic powders were twice as high as those of conventional PIM stainless steel products. Such property improvement suggested new applicability of the PIM products of Fe-based metamorphic powders to structures and parts requiring excellent mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Injection Molding Process and Properties · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Shibo · J. Mater. Process. Technol. · 2006 · 173 · 31010.1016/j.jmatprotec.2005.12.001 ↗
2. Shu · Acta Mater. · 2006 · 54 · 133510.1016/j.actamat.2005.11.007 ↗
3. Binet · J. Mater. Process. Technol. · 2005 · 164–165 · 116010.1016/j.jmatprotec.2005.02.128 ↗
4. Suri · Mater. Sci. Eng. A · 2003 · 356 · 33710.1016/S0921-5093(03)00146-1 ↗
5. Peker · Appl. Phys. Lett. · 1993 · 63 · 234210.1063/1.110520 ↗
6. Inoue · Acta Mater. · 2000 · 48 · 27910.1016/S1359-6454(99)00300-6 ↗
7. Lee · Met. Mater. Int. · 2005 · 11 · 5310.1007/BF03027484 ↗
8. Kim · Mater. Sci. Eng. A · 2005 · 406 · 29310.1016/j.msea.2005.06.043 ↗
9. Choi-Yim · J. Appl. Phys. · 1998 · 83 · 799310.1063/1.367981 ↗
10. Kim · Wear · 2002 · 249 · 84610.1016/S0043-1648(01)00683-4 ↗
11. Lee · Mater. Sci. Eng. A · 2006 · 441 · 29110.1016/j.msea.2006.08.049 ↗
12. Park · J. Kor. Inst. Met. Mater. · 2001 · 39 · 609
13. Kwon · Met. Mater. Int. · 2006 · 12 · 20710.1007/BF03027532 ↗
14. Kojima · Mater. Sci. Eng. A · 1997 · 226–228 · 52010.1016/S0921-5093(96)10677-8 ↗
15. Hughes · Scr. Metall. · 1986 · 20 · 9310.1016/0036-9748(86)90219-X ↗
16. Lasalmonie · J. Mater. Sci. · 1986 · 21 · 183710.1007/BF00547918 ↗
17. Lim · Mater. Sci. Forum · 1992 · 88–90 · 10510.4028/www.scientific.net/MSF.88-90.105 ↗
18. Van Swygenhoven · Nanostruct. Mater. · 1995 · 6 · 73910.1016/0965-9773(95)00164-6 ↗
19. Park · Met. Mater. Int. · 2005 · 11 · 1910.1007/BF03027480 ↗
20. Yun · Surf. Coat. Technol. · 2006 · 200 · 347810.1016/j.surfcoat.2004.11.017 ↗
21. ASTM Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus, ASTM G99-95a, ASTM, Philadelphia, PA, 1995.
22. Sung · J. Kor. Powder Metall. Inst. · 1999 · 6 · 88
23. Kim · J. Kor. Powder Metall. Inst. · 1996 · 3 · 181
24. Liu · Mater. Lett. · 2000 · 45 · 3210.1016/S0167-577X(00)00070-7 ↗
25. Kulkarni · Metal Powder Rep. · 1990 · 45 · 62910.1016/0026-0657(90)90594-7 ↗
26. ASM Specialty Handbook, Stainless Steels, ASM International, Materials Park, OH, 1994.