Time-dependent deformation of low carbon steel at elevated temperatures
Source abstract
Abstract
Abstract This paper focuses on the microstructure and deformation properties of structural steel at elevated temperatures. The amounts and morphology of carbides present were monitored as a function of thermal exposure parameters. It was observed that as the temperature approaches the ferrite-austenite phase transformation (727 °C), considerable diffusion of cementite plates and abnormal grain growth occurs. A viscoplastic constitutive model has been employed to simulate the flow behavior of the steel. Monotonic and cyclic tests were carried out to determine the kinematic and isotropic hardening parameters required for full identification of the model variables. Results of the model were compared with those obtained experimentally. The material parameters were shown to be sensitive to the microstructure and temperature. Variation in carbide amounts and morphology in the post thermal exposed specimens result in differences in the kinematic hardening, as compared to the as received material. Furthermore, the temperature sensitivity of the isotropic hardening is indicated by the presence a cyclic hardening/softening transition in the temperatures 600–700 °C. Validity of the model in capturing time dependent behavior of the structural steel is examined using a sequentially coupled thermal-stress finite element analysis of single steel beam. Results of this simulation are discussed in terms of effects of temperature and strain-rate sensitivity on the material's viscoplastic deformation response.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Makelainen · Journal of Constructional Steel Research · 1998 · 48 · 4710.1016/S0143-974X(98)00005-4 ↗
2. Saab · Engineering Structures · 1991 · 13 · 37110.1016/0141-0296(91)90024-7 ↗
3. Outinen · Journal of Constructional Steel Research · 1997 · 42 · 16110.1016/S0143-974X(97)00018-7 ↗
4. Najjar · Engineering Structures · 1996 · 18 · 7710.1016/0141-0296(95)00101-5 ↗
5. Tan · Journal of Structural Engineering · 2002 · 128 · 10510.1061/(ASCE)0733-9445(2002)128:1(105) ↗
6. Cattan · 1999
7. Vander Voort · 1984
8. Gayle · 2005
9. Callister · 2007
10. Dieter · 1986
11. Stouffer · 1996
12. Yaguchi · JSME International Journal Series A · 1999 · 4210.1299/jsmea.42.1 ↗
13. Chaboche · Transactions of the ASME, Journal of Pressure Vessel Technology · 1983 · 105 · 123
14. Chaboche · Transactions of the ASME, Journal of Pressure Vessel Technology · 1983 · 105 · 15910.1115/1.3264258 ↗
15. Nouailhas · International Journal of Plasticity · 1989 · 5 · 50110.1016/0749-6419(89)90011-9 ↗
16. Chaboche · International Journal of Plasticity · 1989 · 5 · 24710.1016/0749-6419(89)90015-6 ↗
17. Wang · Journal of Constructional Steel Research · 1995 · 35 · 29110.1016/0143-974X(94)00046-K ↗
18. Chaboche · 1979
19. Chaboche · International Journal of Plasticity · 1991 · 7 · 66110.1016/0749-6419(91)90050-9 ↗
20. Prager · Journal of Applied Physics · 1949 · 20 · 23510.1063/1.1698348 ↗
21. Armstrong · 1996
22. Zaki · 2000
23. Nouailhas · 1987 · 717
24. Lemaitre · 1990