Elevated temperature creep deformation in solid solution strengthened 〈0 0 1〉 NiAl–3.6Ti single crystals
Source abstract
Abstract
Abstract The 1100–1500 K slow plastic strain rate compressive properties of 〈0 0 1〉 oriented NiAl–3.6Ti single crystals have been measured, and the results suggests that two deformation processes exist. While the intermediate temperature/faster strain rate mechanism is uncertain, plastic flow at elevated temperature/slower strain rates in NiAl–3.6Ti appears to be controlled by solute drag as described by the Cottrell–Jaswon solute drag model for gliding b =a 0 〈1 0 1〉 dislocations. While the calculated activation energy of deformation is much higher (∼480 kJ/mol) than the activation energy for diffusion (∼290 kJ/mol) used in the Cottrell–Jaswon creep model, a forced temperature-compensated power law fit using the activation energy for diffusion was able to adequately (>90%) predict the observed creep properties. Thus, we conclude that the rejection of a diffusion controlled mechanism cannot be simply based on a large numerical difference between the activation energies for deformation and diffusion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced Materials Characterization Techniques · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Raj · Scripta Metall. · 1989 · 23 · 204910.1016/0036-9748(89)90230-5 ↗
2. Bowman · Metal. Trans. A · 1992 · 23A · 149310.1007/BF02647332 ↗
3. Whittenberger · Metall. Mater. Trans. A · 1996 · 27A · 262810.1007/BF02652356 ↗
4. W.S. Walston, R.D. Field, J.R. Dobbs, D.F. Lahrman, R. Darolia, in: R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, M.V. Nathal (Eds.), Structural Intermetallics, TMS, Warrendale, PA, 1993, pp. 523–532.
5. Kitabjian · Metall. Mater. Trans. A · 1999 · 30A · 58710.1007/s11661-999-0050-8 ↗
6. Cottrell · Proc. R. Soc. A · 1949 · 199 · 10410.1098/rspa.1949.0128 ↗
7. Mohamed · Acta Metall. · 1974 · 22 · 77910.1016/0001-6160(74)90088-1 ↗
8. Hancock · Phys. Status Solidi A · 1971 · 4 · 14310.1002/pssa.2210040115 ↗
9. R. Darolia, W.S. Walston, in: M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, M. Yamaguchi (Eds.), Structural Intermetallics 1997, TMS, Warrendale, PA, 1997, pp. 585–594.
10. W.S. Walston, R. Darolia, in: K.J. Hemker, D.M. Dimiduk, H. Clemens, R. Darolia, H. Inui, J.M. Larsen, V.K. Sikka, M. Thomas, J.D. Whittenberger (Eds.), Structural Intermetallics 2001, TMS, Warrendale, PA, 2001, pp. 735–744.
11. Field · Scripta Metall. · 1989 · 23 · 146910.1016/0036-9748(89)90112-9 ↗
12. Whittenberger · J. Mater. Sci. · 1988 · 23 · 23510.1007/BF01174059 ↗
13. Whittenberger · Metall. Trans. A. · 1991 · 22A · 159510.1007/BF02667372 ↗
14. Forbes · Metall. Mater. Trans. A · 1996 · 27A · 122910.1007/BF02649860 ↗
15. Kitabjian · Acta Mater. · 1988 · 46 · 70110.1016/S1359-6454(97)00249-8 ↗
16. Rusovic’ · Phys. Status Solidi A · 1977 · 44 · 60910.1002/pssa.2210440225 ↗
17. R.D. Noebe, A. Garg, NASA TM-106981, August 1995.
18. Mills · Philos. Mag. A · 1998 · 77 · 80110.1080/01418619808224085 ↗
19. Frank · Acta Mater. · 2001 · 49 · 139910.1016/S1359-6454(01)00037-4 ↗
20. Shankar · Metall. Trans A · 1978 · 9A · 146710.1007/BF02661819 ↗
21. Kim · Metall. Mater. Trans. A · 2000 · 31A · 1591
22. Nakamura · Intermetallics · 2002 · 10 · 19510.1016/S0966-9795(01)00125-X ↗
23. Minamino · Defect Diffusion Forum · 2000 · 194–199 · 517
24. Minamino · Sci. Technol. Adv. Mater. · 2000 · 1 · 23710.1016/S1468-6996(01)00003-1 ↗
25. Minamino · J. High Temp. Soc. (Jpn.) · 2002 · 28 · 322
26. Garg · Scripta Mater. · 1998 · 39 · 43710.1016/S1359-6462(98)00219-X ↗