On the effect of hydrogen and Fe on reproducibility of tensile properties in cast Al–Si–Mg alloys
Source abstract
Abstract
Abstract Gas porosities and Fe-rich phases and entrapped double oxide films (hereafter: oxides) are known to be the most detrimental defects in cast Al–Si–Mg alloys. The effects of H (gas porosities) and Fe (β-Al5FeSi phase) on reproducibility of tensile properties in Al–7Si–0.35Mg alloy have been investigated in this study. Four different casting conditions (Low H–Low Fe, Low H–High Fe, High H–Low Fe and High H–High Fe) were studied. In each case, 30 tensile test samples were prepared by casting in a metallic mold and machining (total of 120 tensile test samples). Results of tensile test were analyzed by Weibull three-parameter analyses. The microstructures of samples were studied by optical microscope. Total of 800 metallography images (200 images for each experiment) were taken and analyzed by image analysis software. Finally, the relationship between tensile properties and defects characteristics was discussed. According to the results, Fe (β-Al5FeSi phase) showed considerably larger negative impact on tensile properties of the alloy compared to H (pores). Results of Weibull analysis revealed that the scattering of tensile properties was mainly due to the presence of β phase within the microstructure. Results of image analysis showed that the pore area% and number of pores/cm2 were mainly controlled by H and Fe content of the melt, respectively. Also, it was shown that Weibull modules of UTS and El% increased linearly with increasing the shape factor of pores. Furthermore, tensile properties of the examined alloy showed strong dependence to the number of pores.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Tiryakioğlu · Metall. Mater. Trans. A · 2009 · 40 · 100010.1007/s11661-008-9762-4 ↗
2. Ardekhani · J. Mater. Eng. Perform. · 2011 · 1
3. Aryafar · J. Mater. Sci. · 2010 · 45 · 304110.1007/s10853-010-4308-8 ↗
4. Eisaabadi B. · Mater. Sci. Eng. A · 2012 · 548 · 9910.1016/j.msea.2012.03.097 ↗
5. Mi · Metall. Mater. Trans. A · 2004 · 35 · 289310.1007/s11661-004-0237-y ↗
6. Campbell · Metall. Mater. Trans. A · 2006 · 37 · 85710.1007/BF02735006 ↗
7. Tiryakiolu · Scr. Mater. · 2003 · 49 · 87310.1016/S1359-6462(03)00439-1 ↗
8. Nayhumwa · Metall. Mater. Trans. A · 2001 · 32 · 34910.1007/s11661-001-0266-8 ↗
9. Staley · Mater. Sci. Eng. A · 2007 · 465 · 13610.1016/j.msea.2007.02.009 ↗
10. Chen · J. Mater. Eng. Perform. · 2004 · 13 · 6910.1361/10599490417524 ↗
11. Raiszadeh · Metall. Mater. Trans. B · 2006 · 37 · 86510.1007/BF02735007 ↗
12. Green · Mater. Sci. Eng. A · 1993 · 173 · 26110.1016/0921-5093(93)90226-5 ↗
13. Dai · Mater. Sci. Eng. A · 2003 · 354 · 31510.1016/S0921-5093(03)00021-2 ↗
14. Eisaabadi B. · Mater. Sci. Eng. A · 2012 · 558 · 13410.1016/j.msea.2012.07.101 ↗
15. Anson · Mater. Charact. · 1999 · 43 · 31910.1016/S1044-5803(99)00059-5 ↗
16. Ma · Mater. Sci. Eng. A · 2008 · 490 · 3610.1016/j.msea.2008.01.028 ↗
17. Tekmen · Mater. Sci. Eng. A · 2003 · 360 · 36510.1016/S0921-5093(03)00461-1 ↗
18. Irfan · Mater. Sci. Eng. A · 2011 · 535 · 10810.1016/j.msea.2011.12.049 ↗
19. Lei · Res. Dev. · 2011 · 8 · 14
20. Dispinar · Adv. Mater. Res. · 2012 · 445 · 28310.4028/www.scientific.net/AMR.445.283 ↗
21. Liu · J. Mater. Sci. · 2003 · 38 · 125510.1023/A:1022870006721 ↗
22. Wang · Metall. Mater. Trans. B · 2006 · 37 · 88710.1007/BF02735010 ↗
23. Li · Mater. Sci. Eng. A · 2004 · 367 · 9610.1016/j.msea.2003.09.090 ↗
24. Skjerpe · Metall. Mater. Trans. A · 1987 · 18 · 18910.1007/BF02825700 ↗
25. X. Cao, Heat Treatment of Liquid Metal, Precipitation and Sedimentation Processing of Liquid Al–11.5Si–0.4Mg Alloy, University of Birmingham, Birmingham, 2001.
26. Ravi · Metall. Mater. Trans. A · 2002 · 33 · 39110.1007/s11661-002-0100-y ↗
27. Shabestari · Int. J. Cast Met. Res. · 2002 · 15 · 1710.1080/13640461.2002.11819459 ↗
28. Sinfield · J. Aust. Inst. Met. · 1975 · 20 · 44
29. Mohamed · Mater. Des. · 2009 · 30 · 394310.1016/j.matdes.2009.05.042 ↗
30. Seifeddine · Mater. Des. · 2010 · 31 · 610.1016/j.matdes.2009.11.023 ↗
31. C. Villeneuve, A. Samuel, F. Samuel, H. Valtierra, S. Doty, in, 2001, pp. 1–14.
32. Roy · Metall. Mater. Trans. A · 1996 · 27 · 41510.1007/BF02648419 ↗
33. Otte · AFS Trans. · 1999 · 107 · 471
34. Taylor · Metall. Mater. Trans. A · 1999 · 30 · 164310.1007/s11661-999-0101-1 ↗
35. Otte · Trans. AFS · 1999 · 107 · 471
36. Jolly · JOM · 2005 · 57 · 1910.1007/s11837-005-0091-4 ↗
37. Campbell · 2003
38. Caceres · Trans. AFS · 1999 · 107 · 239
39. Hashemi · J. Appl. Sci. · 2009 · 9 · 211510.3923/jas.2009.2115.2122 ↗
40. C.W.M. Nayhumwa, Influence of oxide film filling defects on fatigue properties of cast Al–7Si–Mg alloy, University of Birmingham, Birmingham, 1997.
41. Nyahumwa · Afr. J. Sci. Technol. · 2010 · 6 · 43
42. Cox · Mater. Sci. Technol. · 2003 · 19 · 61310.1179/026708303225002028 ↗
43. Khalili · J. Mater. Sci. · 1991 · 26 · 674110.1007/BF02402669 ↗
44. K. Bangyikhan, Effects of oxide film, Fe-rich phase, porosity and their interactions on tensile properties of cast Al–Si–Mg alloys, University of Birmingham, Birmingham, 2005.
45. T. Hauck, C. Bohm, W.H. Muller, Proceedings of the 6th. International Conference on Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems, EuroSimE, IEEE, 2005, pp. 242–247.
46. Tiryakioğlu · Metall. Mater. Trans. A · 2010 · 41 · 312110.1007/s11661-010-0364-6 ↗
47. Tiryakioglu · Mater. Sci. Eng. A · 2009 · 527 · 39710.1016/j.msea.2009.08.014 ↗