A flow stress for the deformation under varying condition—internal and state variable models
Source abstract
Abstract
This paper presents development and validation of internal and state variable models of flow stress to predict the impact of the varying processing conditions on the mechanical behavior of hot-deformed material. Constitutive equations basing on Taylor's dislocation theory [1] and describing the mechanical behavior of f.c.c. structures present a new internal variable model. This model is multiplicative and considers three factors. The first one is normalized dislocation density, which depends strongly on the strain and weakly on the temperature and strain rate. The second factor introduces the deformation conditions: temperature and strain rate. Its main feature is the consideration of varying conditions, the effect of which is not instantaneous, but with some delay. The third factor takes into account an influence of recrystallization. To verify the proposed solution for varying condition considerations, not only the internal variable model, but also the state variable model is tested. The model developed by Davenport et al. [2] and based on the concept of Sellars and Tegart [3] was chosen as an example and modified then. Results obtained by both internal and state variable models confirm the high accuracy and efficiency of the proposed multiplicative approach for analysis and prediction of the flow stress under the varying deformation conditions for the material of f.c.c. structure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Taylor · Proc. R. Soc. · 1934 · A145 · 362
2. Davenport · Mat. Sci. Technol. · 2000 · 16 · 53910.1179/026708300101508045 ↗
3. Sellars · Membr. Sci. Rev. Metall. · 1966 · 63 · 731
4. Kocks · J. Eng. Mater. Technol. · 1976 · 98 · 7610.1115/1.3443340 ↗
5. Deformation Processing and Structure
6. Yoshie · Trans. ISIJ · 1987 · 27 · 42510.2355/isijinternational1966.27.425 ↗
7. Bergstrom · Mater. Sci. Eng. · 1969 · 5 · 19310.1016/0025-5416(70)90081-9 ↗
8. Estrin · Acta Metall. · 1984 · 29 · 5710.1016/0001-6160(84)90202-5 ↗
9. Kocks · Prog. Mater. Sci. · 2003 · 48 · 17110.1016/S0079-6425(02)00003-8 ↗
10. Estrin · Acta Mater. · 1998 · 46 · 550910.1016/S1359-6454(98)00196-7 ↗
11. Roters · Acta Mater. · 2000 · 48 · 418110.1016/S1359-6454(00)00289-5 ↗
12. Van Houtte · Mater. Sci. Forum · 2007 · 550 · 1310.4028/www.scientific.net/MSF.550.13 ↗
13. Sandström · Acta Metall. · 1975 · 23 · 38710.1016/0001-6160(75)90132-7 ↗
14. Roucoules · Mater. Sci. Eng. A · 2003 · 339 · 110.1016/S0921-5093(02)00120-X ↗
15. J. Ordon, M. Pietrzyk, R. Kuziak, in: M. Pietrzyk, J. Kusiak, J. Majta, P. Hartley (Eds.), Proceedings of the 8th International Conference on Metal Forming Forming 2000, A.A. Balkema, Rotterdam, 2000, pp. 747–753.
16. Salehghaffari · Comput. Mater. Sci. · 2012 · 55 · 23710.1016/j.commatsci.2011.11.035 ↗
17. Horstemeyer · Int. J. Plasticity · 2010 · 26 · 131010.1016/j.ijplas.2010.06.005 ↗
18. Estrin · 1996 · 69
19. Svyetlichnyy · ISIJ Int. · 2005 · 45 · 118710.2355/isijinternational.45.1187 ↗
20. Svyetlichnyy · Mater. Sci. Technol. · 2009 · 25 · 98110.1179/174328408X317084 ↗
21. Majta · 2012 · 237
22. Majta · Mater. Sci. Eng. A · 2007 · 464 · 18610.1016/j.msea.2007.01.135 ↗
23. Doherty · Mater. Sci. Eng. A · 1997 · 238 · 21910.1016/S0921-5093(97)00424-3 ↗
24. Rios · Mater. Res. · 2005 · 8 · 22510.1590/S1516-14392005000300002 ↗
25. Sellars · Mater. Sci. Technol. · 1990 · 6 · 107210.1179/mst.1990.6.11.1072 ↗
26. Qian · Mater. Sci. Eng. A · 2004 · 365 · 18010.1016/j.msea.2003.09.025 ↗
27. Svyetlichnyy · Comput. Mater. Sci. · 2010 · 50 · 9210.1016/j.commatsci.2010.07.011 ↗
28. Svyetlichnyy · ISIJ Int. · 2012 · 52 · 55910.2355/isijinternational.52.559 ↗
29. Svyetlichnyy · Comput. Mater. Sci. · 2012 · 60 · 15310.1016/j.commatsci.2012.03.029 ↗
30. D.S. Svyetlichnyy, J. Nowak, A.I. Mikhalyov, V. Pidvysotskyy, Ł. Łach, in: J. Kusiak, J. Majta, D. Szeliga (Eds.), Proceedings of the 14th International Conference on Metal Forming, 16–19 September 2012, Krakow, Poland, Steel Research International Special Edition, Proceedings of the 14th International Conference on Metal Forming, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, pp. 1155–1158.
31. Nowak · Appl. Mech. Mater · 2011 · 117–119 · 58210.4028/www.scientific.net/AMM.117-119.582 ↗
32. Nelder · Comput. J. · 1965 · 7 · 30810.1093/comjnl/7.4.308 ↗
33. Powell · 1978 · 27