journal article·2015-10

Microstructure, tensile strength and thermostability of W-core SiC fibers with or without carbon coating

Xian Luo, Pengfei Guo, Yanqing Yang, Na Jin, Shuai Liu, Zongde Kou, Shuai Wu

Publisher page

Abstract

Abstract SiC fibers with carbon coating (SiC/C fiber) were prepared by three-stage chemical vapor deposition on W filament. In order to determine their thermal stability, tensile test was then performed after thermal exposure at 900 °C and 1000 °C in vacuum. The microstructure and chemical composition of the fibers were investigated by scanning electron microscopy, transmission electron microscopy and electron probe microanalysis, respectively. The results show that the average room-temperature strength of the 900 °C thermally-exposed SiC/C fiber had little loss in comparison with the as-prepared fibers, while a notable strength degradation occurred for the fiber after 1000 °C thermal exposure. The degradation of the tensile strength is due to the growth of W/SiC interfacial reaction layer and the coarsening of SiC grains in the SiC-2-I zone. In addition, the formation mechanism of the W/SiC interfacial reaction zone and its microstructure evolution were also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. On the tensile properties of a fiber reinforced titanium matrix composite10.1016/0956-7151(94)90477-4 ↗
2. Comparison of orthorhombic and alpha-two titanium aluminides as matrices for continuous SiC-reinforced composites10.1007/BF02652301 ↗
3. Interfacial studies in titanium aluminide/SiCf composites
4. Heat treatment effects on SiC fiber10.1023/A:1004478804694 ↗
5. SiC fiber by chemical vapour deposition on tungsten filament10.1007/BF02704921 ↗
6. High temperature properties of SiC and diamond CVD-monofilaments10.1016/j.jeurceramsoc.2004.06.013 ↗
7. The microstructure of SCS-6 SiC fiber10.1557/JMR.1991.2234 ↗
8. The microstructure of sigma 1140+ SiC fiber10.1016/S0921-5093(98)00973-3 ↗
9. Microstructure characterization of long W core SiC fiber
10. Microstructure of SiC fiber fabricated by two-stage chemical vapor deposition on tungsten filament10.1016/j.jcrysgro.2010.10.001 ↗
11. Effect of high temperature annealing on the microstructure of SCS-6 SiC fibers10.1557/PROC-250-187 ↗
12. Grain growth and strength degradation of SiC monofilaments at high temperatures10.1007/BF00354427 ↗
13. Microstructural and strength stability of CVD SiC fibers in argon environments10.1002/9780470313848.ch16 ↗
14. Creep of chemically vapour deposited SiC fibers10.1007/BF01144723 ↗
15. Fracture mechanisms for SiC fibers and SiC/SiC composites under stress-rupture conditions at high temperatures10.1016/S0096-3003(03)00570-8 ↗
16. Structural and textural changes of CVD-SiC to indentation, high temperature creep and irradiation10.1016/j.jeurceramsoc.2006.05.038 ↗
17. Fracture mechanics of Sigma SM 1140+ fib10.1016/S0013-7944(01)00117-5 ↗
18. Thermal reaction of SiC films with tungsten and tungsten–rhenium alloys10.1007/s10853-007-2334-y ↗
19. Microstructure evolution of C/Mo double-coated SiC fiber reinforced Ti6Al4V composites10.1016/j.msea.2013.12.077 ↗
20. Fracture behaviour of model silicon carbide filaments10.1016/S0266-3538(00)00130-5 ↗
21. Effect of C/Mo duplex coating on the interface and mechanical properties of SiCf/Ti6Al4V composites10.1016/j.msea.2012.12.082 ↗
22. Weibull Strength distributions and fracture characteristics of abrasive materials10.1016/0013-7944(95)00010-S ↗
23. 1989 · vol. 22
24. The effect of interfacial reactions on residual stress fields within composites10.1177/002199839903300402 ↗
25. Zhang · 2011
26. Study on W/SiC interface of SiC fiber fabricated by chemical vapor deposition on tungsten filament10.1016/j.tsf.2010.09.025 ↗
27. In situ measurements and growth kinetics of silicon carbide chemical vapor deposition from methyltrichlorosilane10.1016/S0022-0248(00)00616-3 ↗
28. Kinetic study of silicon carbide deposited from methyltrichlorosilane precursor10.1557/JMR.1994.0104 ↗
29. Okamoto · 2000
30. Barin · 1991
31. Stability of W as electrical contact on 6H-SiC: phase relations and interface reactions in the ternary system W–Si–C10.1016/0921-5107(95)01311-3 ↗
32. Interracial reactions of W thin film on single-crystal (001) β-SiC10.1016/0921-5107(94)04017-X ↗
33. Calculations of tungsten silicide and carbide formation on SiC using the Gibbs free energy10.1016/S0921-5107(00)00457-8 ↗
34. Interfacial reactions and mechanical properties of W–SiC in-situ joints for plasma facing components10.1016/j.jnucmat.2004.04.285 ↗
35. Mofatt · 1978 · Vol. 2
36. Microstructural and mechanical characterization of W/SiC bonding for structural material in fusion10.1016/j.jnucmat.2010.12.079 ↗