Experimental and modeling investigation of the creep-fatigue interactive deformation behavior of PM super alloy FGH96 at evaluated temperature
Source abstract
Abstract
Abstract In this paper, the fatigue tests of powder metallurgy (PM) FGH96 were performed at 650 °C with four different types of dwell to study its cyclic mechanical behavior and creep-fatigue interactive deformation behavior. As shown in test results, PM FGH96 shows obvious feature of cyclic softening. Load level and dwell time are found to be important factors affecting the velocity and degree of cyclic softening. Some regular patterns are clearly displayed in the curves of creep deformation and stress relaxation, which is speculated to affect the characteristics of FGH96's sensitivity to dwell. Based on the test data and analysis, a practical cyclic plasticity-creep model was established by combining Chaboche model and simplified θ-projection model, and its capability of describing the deformation of creep-fatigue interaction behavior has been proved. The investigation of deformation and cyclic properties will be useful for instructing the establishment of creep-fatigue interactive life predicting model in the future.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Metallurgy and Material Forming · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Coffin · Trans. ASME · 1954 · 76 · 931
2. Dwell sensitivity Part I. behavior and modeling10.1016/0167-6636(95)00028-3 ↗
3. Low cycle fatigue—dwell effects and damage mechanisms10.1016/S0142-1123(98)00056-5 ↗
4. Dwell effects on high temperature fatigue damage mechanisms: Part II10.1016/S0261-3069(00)00061-3 ↗
5. Frequency and hold-time effects on low cycle fatigue life of notched specimens at elevated temperature10.1115/1.3226433 ↗
6. Constitutive equations for cyclic palsticity and cyclic viscoplasticity10.1016/0749-6419(89)90015-6 ↗
7. A review of some plasticity and viscoplasticity constitutive theories10.1016/j.ijplas.2008.03.009 ↗
8. Creep of metals and alloys
9. Viscoplastic constitutive equations of combustion chamber materials including cyclic hardening and dynamic strain aging10.1016/j.ijplas.2012.09.011 ↗
10. The θ projection concept—a model-based approach to design and life extension of engineering plant10.1016/0308-0161(92)90035-E ↗
11. Direct powder forging of pm nickel-based super alloy: densification and recrystallisation
12. Jia · 2011
13. N.S. Stoloff, D.J. Duquette, S.J. Choe, S. Golwalkar, Fatigue Crack Growth and Low Cycle Fatigue of Two Nickel Base Super Alloys, 1983.
14. Gayda · 1985
15. Experimental study of the cyclic mechanical behaviour of two ni-based super alloys at evaluated temperature10.1016/j.msea.2013.01.012 ↗
16. Editorial board of Material data sheet of aircraft engine design. Aviation Materials Handbook Volume 5[M]. China Standard Press, 2001:7-5066-2386-2.