journal article·2019-03

Co-precipitation mechanism of nanoscale particles and mechanical properties in multicomponent ultra-high strength low carbon steel

Zhentuan Li, Feng Chai, Caifu Yang, Li Yang

Publisher page

Abstract

Abstract The superior mechanical performance of ultra-high strength low carbon steel was attained through the co-precipitation strengthening and lath-martensitic microstructure refinement. The research results showed that the precipitates enriched with Cu, Ni, Mn and Al were observed at 525 °C aging by atom probe tomography (APT), the face-centered cubic (FCC) Ni3Al phase precipitated from matrix firstly, and then the body-centered cubic (BCC) Cu-rich precipitates nucleated on the surface of Ni3Al particles to form composite precipitation phase of nanoscale Ni3Al and Cu particles eventually. The co-precipitation strengthening increment of nanoscale Cu and Ni3Al particles was calculated as 413 MPa. With the addition of multiple micro-alloyed elements, such as Nb, Ti and Mo, a relatively high amount of (Nb, Ti, Mo)C nanoscale co-precipitates below 10 nm were obtained in the matrix aged at 525 °C. The substitution of Mo for Nb, Ti would decelerate the coarsening kinetics of (Nb,Ti)C and cause high amount of finer precipitates. While those fine (Nb, Ti) C particles could evidently impede the grain growth, the finer martensitic blocks were subsequently obtained at 820 °C quenching, and the grain size and effective grain size were 5.6 µm and 3.08 µm in this condition, respectively. In this research, the Ni-Al-Cu steel with best matching of strength and toughness has been achieved when it was aged at 600 °C after 820 °C quenching, the yield strength and −80 °C impact toughness could reach 1138 MPa and 74 J, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Advanced Materials Characterization Techniques · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Co-precipitated and collocated carbides and Cu-rich precipitates in a Fe–Cu steel characterized by atom-probe tomography10.1017/S1431927614013221 ↗
2. Multicomponent high-strength low-alloy steel precipitation-strengthened by sub-nanometric Cu precipitates and M2C carbides10.1007/s11661-016-3569-5 ↗
3. Age-hardening effect and formation of nanoscale composite precipitates in a NiAlMnCu-containing steel10.1016/j.msea.2015.01.023 ↗
4. A nanoscale co-precipitation approach for property enhancement of Fe-base alloys10.1038/srep01327 ↗
5. Aging characteristics and mechanical properties of 1600 MPa body-centered cubic Cu and B2-NiAl precipitation-strengthened ferritic steel10.1016/j.actamat.2014.03.051 ↗
6. Co-precipitation of nanoscale particles in steels with ultra-high strength for a new era10.1016/j.mattod.2016.07.002 ↗
7. Microstructure characterization of Cu-rich nanoprecipitates in a Fe–2.5 Cu–1.5 Mn–4.0 Ni–1.0 Al multicomponent ferritic alloy10.1016/j.actamat.2012.12.034 ↗
8. Influence of aging and thermomechanical treatments on the mechanical properties of a nanocluster-strengthened ferritic steel10.1007/s11661-011-0835-4 ↗
9. The temporal evolution of the decomposition of a concentrated multicomponent Fe–Cu-based steel10.1016/j.actamat.2007.12.044 ↗
10. High-strength low-carbon ferritic steel containing Cu-Fe-Ni-Al-Mn precipitates10.1007/s11661-007-9417-x ↗
11. Thermally stable Ni-rich austenite formed utilizing multistep intercritical heat treatment in a low-carbon 10 wt Pct Ni martensitic steel10.1007/s11661-017-4146-2 ↗
12. High-strength steels hardened mainly by nanoscale NiAl precipitates10.1016/j.scriptamat.2014.05.006 ↗
13. Effect of Nb addition on the microstructure and mechanical properties of an 1800 MPa ultrahigh strength steel10.1016/j.msea.2014.11.005 ↗
14. Effects of rolling temperature on the microstructure and mechanical properties of Ti-Mo microalloyed hot-rolled high strength steel10.1016/j.msea.2014.03.054 ↗
15. Strengthening mechanisms of a new 700 MPa hot rolled Ti-microalloyed steel produced by compact strip production10.1016/j.jmatprotec.2010.05.018 ↗
16. Effect of niobium and grain boundary density on the fire resistance of Fe-C-Mn steel10.1016/j.scriptamat.2012.12.030 ↗
17. Superconductivity of the transition-metal carbides10.1103/PhysRev.159.327 ↗
18. Stability of (Ti, M) C (M= Nb, V, Mo and W) carbide in steels using first-principles calculations10.1016/j.actamat.2011.09.051 ↗
19. Precipitation behavior of carbide during heating process in Nb and Nb-Mo micro-alloyed steels
20. Effect of microstructural refinement on the toughness of low carbon martensitic steel10.1016/j.scriptamat.2007.10.053 ↗
21. Effect of microstructural types on toughness and microstructural optimization of ultra-heavy steel plate: EBSD analysis and microscopic fracture mechanism10.1016/j.msea.2016.02.001 ↗
22. Precipitation mechanism and mechanical properties of an ultra-high strength steel hardened by nanoscale NiAl and Cu particles10.1016/j.actamat.2015.06.063 ↗
23. Group precipitation and age hardening of nanostructured Fe-based alloys with ultra-high strengths10.1038/srep21364 ↗
24. Kelly · 1971
25. A dispersion strengthening model based on differing elastic moduli applied to the iron-copper system10.1016/0001-6160(72)90091-0 ↗
26. Yong · 2006
27. Origin of copper precipitation strengthening in steel revisited10.1016/j.scriptamat.2005.02.034 ↗
28. Origin of copper precipitation strengthening in steel revisited10.1016/j.scriptamat.2005.02.034 ↗
29. Prediction of the yield strength of a secondary-hardening steel10.1016/j.actamat.2013.04.052 ↗
30. On the additivity of precipitation and solid solution hardening in under-and over-aged single crystals of (CuAu)-Co10.1016/0001-6160(87)90161-1 ↗
31. Carbide precipitation in austenite of Nb–Mo-bearing low-carbon steel during stress relaxation10.1016/j.matlet.2015.06.111 ↗
32. On the theory of the effect of precipitate particles on grain growth in metals10.1098/rspa.1966.0208 ↗
33. Yu · 2013