Mechanical behaviour of Ti-Nb-Hf alloys
Source abstract
Abstract
Ti-(24,26)Nb-(2,4)Hf at.% alloys were designed by assuming that hafnium has a similar effect to zirconium in the Ti-Nb-Zr system. Alloy specimens were produced using vacuum arc melting and subsequently hot-rolled. Uniaxial tensile testing was then performed both at ambient temperature and in liquid nitrogen at −196 °C. While the alloys showed no obvious superelastic behaviour, they exhibited pronounced strain hardening and could achieve high elongations before failure (>30% engineering strain). Post-mortem examination revealed that the mechanism of strain hardening was extensive {332} and/or {211} deformation twinning. Twinning was found to be more prevalent in alloys with 2at.% Hf compared to those with 4at.%. The cryogenic temperature deformation also promoted deformation twinning when compared to ambient temperature results. As is the case with other metastable β-Ti alloys, maintaining control over the precipitation of ω phases was found to be crucial for attaining desirable mechanical behaviour. Further, microstructural engineering and alloying may be used to develop strong, lightweight alloys based on the Ti-Nb-Hf system with beneficial strain hardening characteristics for energy absorption and biomedical applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Effect of initial microstructure on plastic flow behaviour during isothermal forging of Ti-10V-2Fe-3Al10.1016/j.msea.2008.09.071 ↗
2. Thermomechanical processing of Ti-5Al-5Mo-5V-3Cr10.1016/j.msea.2008.01.055 ↗
3. Multifunctional alloys obtained via a dislocation-free plastic deformation mechanism10.1126/science.1081957 ↗
4. Super-elastic titanium alloy with unstable plastic deformation10.1063/1.2037192 ↗
5. Mechanical properties and shape memory behavior of Ti-Nb alloys10.2320/matertrans.45.2443 ↗
6. Martensitic transformation, shape memory and superelasticity of Ti-Nb binary alloys10.1016/j.actamat.2006.01.019 ↗
7. Cubic to orthorhombic diffusionless phase change - experimental and theoretical studies of AuCd10.1063/1.1722021 ↗
8. The crystallography of martensite transformations II10.1016/0001-6160(54)90103-0 ↗
9. The crystallography of martensite transformations - IV body-centred cubic to orthorhombic transformations10.1016/0001-6160(57)90018-4 ↗
10. Relationship between texture and macroscopic transformation strain in severely cold-rolled Ti-Nb-Al superelastic alloy10.2320/matertrans.45.1083 ↗
11. Martensitic transformation and superelasticity of Ti-Nb-Pt alloys10.2320/matertrans.48.400 ↗
12. Crystal structure, transformation strain, and superelastic property of Ti-Nb-Zr and Ti-Nb-Ta alloys10.1007/s40830-015-0022-3 ↗
13. Shape memory characteristics of Ti-22Nb-(2-8)Zr(at.%) biomedical alloys10.1016/j.msea.2005.05.050 ↗
14. Effect of heat treatment and sn content on superelasticity in biocompatible TiNbSn alloys10.2320/matertrans.43.2978 ↗
15. Effect of low temperature ageing on superelastic behaviour in biocompatible β TiNbSn alloys10.2320/matertrans.MER2007182 ↗
16. Shape memory behaviour of Ti-22Nb-(0.5-2.0)O(at.%) biomedical alloys10.2320/matertrans.46.852 ↗
17. The effect of oxygen on α″ martensite and superelasticity in Ti-24Nb-4Zr-8Sn10.1016/j.actamat.2010.09.015 ↗
18. Nanoprecipitation in a beta-titanium alloy10.1016/j.jallcom.2014.10.038 ↗
19. Effect of precipitation on mechanical properties in the β-Ti alloy Ti-24Nb-4Zr-8Sn10.1016/j.msea.2015.12.024 ↗
20. Precipitation processes in the beta-titanium alloy Ti-5Al-5Mo-5V-3Cr10.1016/j.jallcom.2015.05.251 ↗
21. M. Morinaga, M. Kato, T. Kamimura, M. Fukumoto, I. Harada, K. Kubo, Theoretical design of β-type titanium alloys, in: F.H. Froes, I. Caplan (Eds.), Titanium '92, Vol. 1, TMS, 1993, pp. 217–224.
22. Design and mechanical properties of new β type titanium alloys for implant materials10.1016/S0921-5093(97)00808-3 ↗
23. On the mechanism of superelasticity in Gum metal10.1016/j.actamat.2008.11.013 ↗
24. Superelastic load cycling of Gum Metal10.1016/j.actamat.2015.01.033 ↗
25. The dynamic behaviour of a twinning induced plasticity steel10.1016/j.msea.2013.09.081 ↗
26. α′ type Ti-Nb-Zr alloys with ultra-low Young's modulus and high strength10.1016/j.pnsc.2013.11.005 ↗
27. Design and characterization of new Ti-Nb-Hf alloys10.1007/s11665-009-9381-2 ↗
28. Low modulus Ti-Nb-Hf alloy for biomedical applications10.1016/j.msec.2014.06.010 ↗
29. Mechanical properties of low modulus β titanium alloys designed from the electronic approach10.1016/j.jmbbm.2010.07.001 ↗
30. Review of effect of oxygen on room temperature ductility of titanium and titanium alloys10.1179/1743290114Y.0000000108 ↗
31. Microstructure and mechanical behavior of superelastic Ti-24Nb-0.5O and Ti-24Nb-0.5N biomedical alloys10.1016/j.jmbbm.2012.01.017 ↗
32. The effect of grain size on the twin initiation stress in a TWIP steel10.1016/j.actamat.2015.02.008 ↗
33. Deformation twinning10.1016/0079-6425(94)00007-7 ↗
34. Correlation of tensile properties, deformation modes, and phase stability in commercial β-phase titanium alloys10.1007/BF02825707 ↗
35. On the mechanism of {332} twinning in metastable β titanium alloys10.1016/j.actamat.2016.03.040 ↗
36. The mode of plastic deformation of β Ti-V alloys, Mater10.2320/matertrans1960.23.507 ↗
37. Change of the deformation mechanism (slip ↔ twinning) in polycrystalline α-iron10.1002/pssb.19660180241 ↗
38. Influence of temperature and strain rate on slip and twinning behavior of Zr10.1007/BF02669423 ↗