journal article·2017-01

Neutron diffraction and finite element analysis of the residual stress distribution of copper processed by equal-channel angular pressing

Hak Hyeon Lee, Kapil Dev Gangwar, Kyung-Tae Park, Wanchuck Woo, Hyoung Seop Kim

Publisher page

Abstract

Abstract Residual stress remaining after plastic deformation significantly affects the physical and chemical behaviors of materials. In this work, the residual stress distribution in Cu after single-pass equal-channel angular pressing (ECAP) was evaluated using neutron diffraction and the finite element method (FEM). The residual stress distributions simulated using the FEM are in good agreement with the experimental results measured using the neutron diffraction method. The workpiece had non-uniform distribution of residual stresses from bottom to top region of a rod specimen with circular cross-section. The axial residual stress in the top region of the workpiece was highly tensile; while it was only slightly tensile in the bottom region. On the other hand, the radial and hoop residual stresses were tensile in the bottom region, whereas they were compressive in the top region. Despite such non-uniformity of residual stresses, the middle region of the workpiece had relatively homogeneous tensile residual stresses. This investigation on the residual stress distribution in the ECAP-processed material provides a new window from which engineering problems in related with residual stress can be issued and solved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. A critical evaluation of the processing of an aluminum 7075 alloy using a combination of ECAP and HPT10.1016/j.msea.2013.12.034 ↗
2. Extreme grain refinement by severe plastic deformation: a wealth of challenging science10.1016/j.actamat.2012.10.038 ↗
3. Mechanical and electrical properties of an ultrafine grained Al–8.5 wt. % RE (RE=5.4 wt.% Ce, 3.1 wt.% La) alloy processed by severe plastic deformation10.1016/j.matdes.2015.10.163 ↗
4. Producing bulk ultrafine-grained materials by severe plastic deformation10.1007/s11837-006-0213-7 ↗
5. Fundamentals of superior properties in bulk nanoSPD materials10.1080/21663831.2015.1060543 ↗
6. Plastic working of metals by simple shear
7. Analysis of plastic deformation behavior during back pressure equal channel angular pressing by the finite element method10.1016/j.commatsci.2013.04.054 ↗
8. Developing superplasticity in a magnesium alloy through a combination of extrusion and ECAP10.1016/S1359-6454(03)00118-6 ↗
9. Designing of ECAP parameters based on strain distribution uniformity10.1016/j.pnsc.2012.08.001 ↗
10. Bio-corrosion of a magnesium alloy with different processing histories10.1016/j.matlet.2007.12.052 ↗
11. Principle of equal-channel angular pressing for the processing of ultra-fine grained materials10.1016/1359-6462(96)00107-8 ↗
12. Finite element analysis of equal channel angular pressing using a round corner die10.1016/S0921-5093(01)01188-1 ↗
13. Plastic deformation analysis of metals during equal channel angular pressing10.1016/S0924-0136(01)00710-5 ↗
14. Microstructural development in equal-channel angular pressing using a 60° die10.1016/j.actamat.2004.01.040 ↗
15. Mechanism of creation of compressive residual stress by shot peening10.1016/S0142-1123(98)00002-4 ↗
16. Residual stress determination in cold drawn steel wire by FEM simulation and X-ray diffraction10.1016/S0921-5093(02)00509-9 ↗
17. Residual stresses induced by electron beam welding in a 6061 aluminium alloy10.1016/j.jmatprotec.2016.04.013 ↗
18. On the correct selection of the channel die in ECAP processes10.1016/j.scriptamat.2003.10.007 ↗
19. Optimum processing parameters for equal channel angular pressing10.1016/j.mechmat.2016.06.003 ↗
20. Finite element analysis of residual stress induced by shot peening process10.1016/S0965-9978(03)00063-2 ↗
21. FEM prediction of welding residual stress and distortion in carbon steel considering phase transformation effects10.1016/j.matdes.2008.04.052 ↗
22. Experimental and numerical investigation of residual stresses around cold extrusion hole of ultrahigh strength steel10.1016/j.matdes.2013.02.073 ↗
23. Investigation of through thickness residual stress distribution in equal channel angular rolled Al 5083 alloy by layer removal technique and X-ray diffraction10.1016/j.matdes.2012.03.029 ↗
24. Residual stresses evolution in Cu tubes, cold drawn with tilted dies – Neutron diffraction measurements and finite element simulation10.1016/j.matdes.2016.06.028 ↗
25. Investigation of residual stress and post weld heat treatment of multi-pass welds by finite element method and experiments10.1016/j.jmatprotec.2004.04.325 ↗
26. Effect of wavelength-dependent attenuation on neutron diffraction stress measurements at depth in steels10.1107/S0021889811018899 ↗
27. An experimental verification of the finite element modelling of equal channel angular pressing10.1016/j.commatsci.2009.03.018 ↗
28. On the die corner gap formation in equal channel angular pressing10.1016/S0921-5093(00)00970-9 ↗
29. Dieter · 1988 · 409