journal article·2016-06

Microstructure and orientation evolution in unidirectional solidified Al–Zn alloys

Zhongwei Chen, Enyuan Wang, Xiaolei Hao

Publisher page

Abstract

Abstract Morphological instability and growth orientation evolution during unidirectional solidification of Al–Zn alloys with different pulling speeds were investigated by X-ray diffraction (XRD) and electron back-scatter diffraction (EBSD) in scanning electron microscope (SEM). The experimental results show that, as the pulling speed increases, the primary dendrite spacing becomes smaller gradually and dendrite trunks incline to the heat flow direction perfectly in unidirectional solidified Al–9.8 wt%Zn and Al–89 wt%Zn alloys. However, regardless of the pulling speed in unidirectional solidified Al–Zn alloys under fixed thermal gradient, the regular dendrites with directions of primary trunks and secondary arms in 9.8 wt% Zn composition are replaced by dendrites of primary trunks and secondary arms in 89 wt% Zn composition. In unidirectional solidified Al–32 wt% Zn alloy, cellular, fractal seaweed, and stabilized seaweed structures were observed at high pulling speeds. At a high pulling speed of 1000 µm/s, seaweed structures transform to the columnar dendrites with trunks and arms. The above orientation evolution can be attributed to low anisotropy of solid-liquid interface energy and the seaweed structure is responsible for isotropy of {111} planes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Orientation selection in solidification patterning10.1016/j.actamat.2011.10.006 ↗
2. Kurz · 1998
3. Predicting growth direction of tilted dendritic arrays during directional solidification10.1016/j.jcrysgro.2011.06.021 ↗
4. Effect of a vertical magnetic field on the dendrite morphology during Bridgman crystal growth of Al–4.5wt% Cu10.1016/j.jcrysgro.2006.02.017 ↗
5. Morphological instability of cell and dendrite during directional solidification under a high magnetic field10.1016/j.actamat.2008.03.018 ↗
6. Anaxial columnar dendrites in directional solidification of an Al–15wt% Cu alloy10.1016/j.matlet.2011.07.013 ↗
7. Rapid solidification processing of 7XXX aluminium alloys: a review10.1016/0025-5416(86)90406-4 ↗
8. Twinned dendrite growth in binary aluminum alloys10.1016/j.actamat.2008.07.046 ↗
9. Dendrite growth morphologies in aluminium alloys10.1016/S1359-6454(98)00308-5 ↗
10. Feathery grain growth during solidification under forced flow conditions10.1016/j.actamat.2007.02.030 ↗
11. Growth directions in directionally solidified Al–Zn and Zn–Al alloys near eutectic composition10.1016/j.scriptamat.2008.04.017 ↗
12. EBSD characterization of dendrite growth directions, texture and misorientations in hot-dipped Al–Zn–Si coatings10.1016/S1359-6454(00)00322-0 ↗
13. Dendrite growth directions in aluminum-zinc alloys10.1007/BF02586112 ↗
14. Grain selection and texture evolution in directionally solidified Al–Zn alloys10.1007/s11661-008-9546-x ↗
15. Morphological transitions during directional solidification under high thermal gradient
16. Oscillatory growth of directionally solidified ammonium chloride dendrites10.1016/S0022-0248(01)00847-8 ↗
17. Orientation selection in dendritic evolution10.1038/nmat1693 ↗
18. Three-dimensional crystal-melt Wulff-shape and interfacial stiffness in the Al–Sn binary system10.1103/PhysRevB.70.214103 ↗
19. Measurement of anisotropy of crystal-melt interfacial energy for a binary Al–Cu alloy10.1016/S1359-6454(01)00306-8 ↗
20. Inverse method for the determination of a mathematical expression for the anisotropy of the solid-liquid interfacial energy in Al–Zn–Si alloys10.1103/PhysRevE.74.021604 ↗
21. Factors determining crystal orientation of dendritic growth during Solidification10.1016/S0254-0584(97)80044-2 ↗
22. Dendritic growth morphologies in Al–Zn Alloys—Part II: phase-field computations10.1007/s11661-013-1911-8 ↗
23. Dynamics of low anisotropy morphologies in directional solidification10.1103/PhysRevE.66.051604 ↗