A methodology for evaluating sheet formability combining the tensile test with the M–K model
Source abstract
Abstract
This paper proposed an approach for evaluating the sheet formability by combining the tensile test with the finite element Marciniak and Kuczynski (M-K) model. Firstly, the tensile test with a notched specimen was carried out to identify an appropriate constitutive law for an AA5086 sheet. A modified Ludwick's law was used to describe its forming behavior. A technique of digital image correlation associated with a highspeed camera was applied to evaluate specimen's surface strains during the experiments. The inverse analysis was performed to identify the parameter values in the constitutive law. The initial geometrical imperfection factor in the M-K model was determined. Then by using the commercial finite element software ABAQUS, the M-K model was simulated to evaluate numerically the sheet formability of the alloy. By means of a user-defined FORTRAN subroutine UHARD, the constitutive law was implanted into ABAQUS. Different strain states were obtained by changing displacement ratios and forming limit curves (FLCs) of the sheet were determined too. Finally, an experimental procedure based on the modified Marciniak test was carried out and the FLCs were obtained experimentally. The comparison between the numerical and experimental results showed that the approach developed in this paper could give an appropriate prediction of FLCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Laser and Thermal Forming Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Petek · Journal of Mechanical Engineering · 2005 · 51 · 330
2. Campos · Journal of Materials Processing Technology · 2006 · 179 · 5610.1016/j.jmatprotec.2006.03.065 ↗
3. Eyckens · International Journal of Plasticity · 2009 · 25 · 224910.1016/j.ijplas.2009.02.002 ↗
4. Ozturk · Journal of Materials Processing Technology · 2004 · 147 · 39710.1016/j.jmatprotec.2004.01.014 ↗
5. K. Nakazima, T. Kikuma, K. Asuka, Study on the Formability of Steel Sheet, Technical Report, Yawata, 1971.
6. Ghosh · Metallurgical Transactions · 1974 · 2161 · 5
7. Marciniak · International Journal of Mechanical Sciences · 1973 · 15 · 78910.1016/0020-7403(73)90068-4 ↗
8. A. Col, Numerical and Experimental Methods of FLCs Prediction for the Processes of Stamping and Hydroforming of Tubes, Technical Report, 2006.
9. Wu · Modelling and Simulation in Materials Science and Engineering · 2004 · 12 · 51110.1088/0965-0393/12/3/011 ↗
10. Narasimhan · 2004 · 850
11. Volk · 2006
12. Aretz · International Journal of Plasticity · 2007 · 23 · 79810.1016/j.ijplas.2006.07.005 ↗
13. C.S. Zhang, Investigations on the Effect of Strain Rate Sensitivity on Formability of Aluminium Alloy Sheets, PhD Thesis, INSA de Rennes, France, 9, 2008.
14. Banabic · 2005 · 466
15. Davoodi · Measurement Science and Technology · 2005 · 16 · 210110.1088/0957-0233/16/10/027 ↗
16. Zhang · Materials Science and Engineering: A · 2010 · 527 · 96710.1016/j.msea.2009.09.013 ↗
17. Zhang · 2008 · 229
18. Hosford · 2005