Pre-deformation–transformation plasticity relationship during martensitic transformation
Source abstract
Abstract
The role of pre-deformation temperature (T*) on the diffusionless martensitic phase transformation in a low alloy steel was investigated. The current results indicate that transformation plasticity strains at room temperature are often significantly underestimated in the case of combined pre-straining and superimposed stresses, if the transformation plasticity strain values obtained from separate experiments are simply superposed. However, when the difference between T* and the martensite start temperature increases no transformation plasticity strains are present following pre-deformation, and a prediction of the resulting transformation plasticity strains for a combined experiment from individual experiments is feasible. Overall, the current findings demonstrate that an accurate prediction of transformation plasticity strains strongly depends on T*. Thus, the current results emphasize the necessity of proper incorporation of T* while modelling complex production processes involving pre-deformation, superimposition of stresses and phase transformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Lambers · Metall. Mater. Trans. · 2009 · A40 · 135510.1007/s11661-009-9827-z ↗
2. Verlag Stahleisen · 1961
3. Wang · ISIJ Int. · 1999 · 39 · 103810.2355/isijinternational.39.1038 ↗
4. Weidig · Steel Res. Int. · 2008 · 79 · 5910.1002/srin.200806316 ↗
5. Wei · Steel Res. Int. · 2004 · 75 · 75910.1002/srin.200405839 ↗
6. Wei · Mater. Sci. Technol. · 2004 · 20 · 90910.1179/026708304225019641 ↗
7. Chang · J. Mater. Sci. · 1996 · 31 · 214510.1007/BF00356638 ↗
8. Ahrens · HTM · 2002 · 57 · 9910.1515/htm-2002-570210 ↗
9. Shipway · Mater. Sci. Eng. · 1995 · A201 · 14310.1016/0921-5093(95)09769-4 ↗
10. Matsuzaki · Acta Metall. Mater. · 1994 · 42 · 108110.1016/0956-7151(94)90125-2 ↗
11. Bhadeshia · Mater. Sci. Technol. · 1991 · 7 · 68610.1179/mst.1991.7.8.686 ↗
12. Ahrens · J. Phys. IV · 2004 · 120 · 615
13. Bhadeshia · 1996 · 543
14. Larn · Mater. Sci. Eng. · 2000 · A278 · 27810.1016/S0921-5093(99)00597-3 ↗
15. Shipway · Mater. Sci. Technol. · 1995 · 11 · 111610.1179/mst.1995.11.11.1116 ↗
16. Larn · Mater. Sci. Eng. · 1999 · A264 · 13910.1016/S0921-5093(98)01085-5 ↗
17. Shipway · Mater. Sci. Eng. · 1997 · A223 · 17910.1016/S0921-5093(96)10479-2 ↗
18. Patel · Acta Metall. · 1953 · 1 · 53110.1016/0001-6160(53)90083-2 ↗
19. U. Ahrens, Beanspruchungsabhängiges Umwandlungsverhalten und Umwandlungsplastizität niedrig legierter Stähle mit unterschiedlich hohen Kohlenstoffgehalten, Dissertation, Paderborn, 2003.
20. Greenwood · Proc. R. Soc. Lond. · 1965 · A283 · 40310.1098/rspa.1965.0029 ↗
21. Taleb · Int. J. Plast. · 2006 · 22 · 11010.1016/j.ijplas.2005.03.012 ↗
22. C.L. Magee, Transformation kinetics, microplasticity and aging of martensite in Fe–31Ni, Ph.D. thesis, Carnegie Mellon University, Pittsburgh, USA, 1966.
23. Kundu · Proc. R. Soc. · 2007 · A463 · 230910.1098/rspa.2007.1881 ↗
24. Leblond · Int. J. Plast. · 1989 · 5 · 55110.1016/0749-6419(89)90001-6 ↗
25. Taleb · Int. J. Plast. · 2003 · 19 · 182110.1016/S0749-6419(03)00020-2 ↗
26. Wolff · Comput. Mater. Sci. · 2005 · 32 · 60410.1016/j.commatsci.2004.09.003 ↗
27. Marketz · Model. Simul. Mater. Sci. Eng. · 1994 · 2 · 101710.1088/0965-0393/2/5/006 ↗
28. Reisner · Int. J. Solids Struct. · 1998 · 35 · 245710.1016/S0020-7683(97)00149-2 ↗
29. Fischer · Int. J. Plast. · 2000 · 16 · 72310.1016/S0749-6419(99)00078-9 ↗
30. Taleb · J. Phys. IV · 2002 · 12 · 187
31. Grostabussiat · J. Phys. IV · 2001 · 11 · 17310.1051/jp4:2001422 ↗
32. Videau · J. Phys. IV 6-C1 · 1996 · 465
33. Umemoto · Metall. Trans. · 1974 · 5 · 204110.1007/BF02644497 ↗
34. Lee · Mater. Sci. Forum · 2005 · 475–479 · 316910.4028/www.scientific.net/MSF.475-479.3169 ↗
35. Meyerson · Trans. ASM · 1954 · 46 · 1225
36. Yang · Scr. Mater. · 2009 · 60 · 49310.1016/j.scriptamat.2008.11.043 ↗
37. Garcia-Junceda · Scr. Mater. · 2008 · 58 · 13410.1016/j.scriptamat.2007.09.017 ↗
38. Yang · Mater. Sci. Technol. · 2007 · 23 · 55610.1179/174328407X176857 ↗
39. Sastri · J. Iron Steel Inst. · 1965 · 203 · 138
40. Nishiyama · 1978
41. Bhadeshia · 2001
42. Ahrens · HTM · 2000 · 55 · 32910.1515/htm-2000-550603 ↗
43. H.-G. Lambers, S. Tschumak, H.J. Maier, in: H.-W. Zoch, Th. Lübben, Bremen (Eds.), Proc. 2nd Int. Conf. Distortion Engineering—IDE, (2008) 347-354.