journal article·2000-04

Effect of carbon content on elevated temperature stability and tensile properties of Fe–8.5 Al Alloys

R.G Baligidad, A Radhakrishna

Materials Science and Engineering: A· Volume 281· Issue 1-2
Publisher page

Abstract

Abstract Fe–8.4Al–0.04C, Fe–8.26Al–0.46C and Fe–8.35Al–1.1C alloys were prepared by a combination of air induction melting and electroslag remelting. The low (0.04 wt.%) carbon alloy exhibited microcracks therefore it was not studied further. The ESR ingots of high (0.46 and 1.1 wt.%) carbon alloys exhibited a significant amount of Fe 3 AlC 0.5 precipitation. The cast ESR samples of Fe–8.26Al–0.46C and Fe–8.35Al–1.1 C were placed in a hearth furnace at 873, 1073 and 1273 K for 24 h and then furnace cooled. The high carbon alloys do not undergo decarburization and exhibit stable microstructure up to 873 K. Decarburization appears to be a problem only after exposure at temperatures of 1073 K and above. The ESR Fe–8.26Al–0.46C alloy exhibited greater elongation and significantly better elevated temperature strength up to 873 K than those reported for cast VIM low carbon multicomponent alloy with similar Al content. This may be due to the presence of a large volume fraction of stable Fe 3 AlC 0.5 precipitates. All the high carbon alloys exhibit a sharp drop in strength at 873 K regardless of carbon content. These alloys are therefore targeted for potential structural application at or below 873 K.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Baligidad · Mater. Sci. Eng. A · 1998 · 255 · 16210.1016/S0921-5093(97)00859-9 ↗
2. Baligidad · Mater. Sci. Eng. A · 1998 · 249 · 9710.1016/S0921-5093(98)00580-2 ↗
3. Baligidad · Mater. Sci. Eng. A · 1998 · 231 · 20610.1016/S0921-5093(97)00078-6 ↗
4. Baligidad · ISIJ Int. · 1996 · 36 · 145310.2355/isijinternational.36.1453 ↗
5. Baligidad · ISIJ Int. · 1996 · 36 · 121510.2355/isijinternational.36.1215 ↗
6. Baligidad · Mater. Sci. Eng. A · 1997 · 230 · 18810.1016/S0921-5093(97)00031-2 ↗
7. Baligidad · Scr. Mater. · 1997 · 36 · 10510.1016/S1359-6462(96)00340-5 ↗
8. R.G. Baligidad, U. Prakash, A. Radhakrishna, Mater. Sci. Eng. A265 (1996) 301.10.1016/S0921-5093(98)01146-0 ↗
9. Palm · Intermetallics · 1995 · 3 · 44310.1016/0966-9795(95)00003-H ↗
10. Sanders · Intermetallics · 1997 · 5 · 36110.1016/S0966-9795(97)00008-3 ↗
11. Sanders · Intermetallics · 1997 · 5 · 37710.1016/S0966-9795(97)00007-1 ↗
12. R.G. Baligidad, U. Prakash, A. Radhakrishna, Indian Patent filed, 1997.
13. Baligidad · Iron Mak. Steel Mak. · 1994 · 21 · 324
14. Baligidad · ISIJ Int. · 1996 · 31 · 145310.2355/isijinternational.36.1453 ↗
15. Kao · J. Mater. Sci. · 1987 · 22 · 320310.1007/BF01161183 ↗
16. Sikka · 1993 · 483
17. Sikka · 1993 · 288 · 971