journal article·2006-01

An investigation of the fatigue crack growth behavior of INCONEL 690

B.A. Young, Xiaosheng Gao, T.S. Srivatsan, Peter J. King

Materials Science and Engineering: A· Volume 416· Issue 1-2
Publisher page

Abstract

This paper describes the use of a crack growth rate superposition model. In this model, the total crack growth rate is taken to be the sum of the crack growth rate in air plus the local corrosion rate. For purpose of statistical data analysis, the fatigue threshold was incorporated into the model. The fatigue threshold for the chosen material (INCONEL 690) is defined and taken to be the crack length per unit cycle of 1.0 × 10−10 m/cycle. To account for threshold values in fatigue crack growth, Klesnil and Lukas developed a modified equation to the Paris Law. By incorporating the modified equation into the model developed and put forth by Argonne National Laboratory, the test data in the threshold region became statistically significant. A comparison of the model developed both with and without the threshold term in the environments of ambient temperature laboratory air and pressurized water reactor (PWR), or low dissolved oxygen (DO) (<10 ppb) water, is made. Results reveal that by incorporating threshold terms into the model, a better correlation between model projection and the actual experimental test data obtained on the material in the ambient temperature laboratory air environment are obtained. The results obtained from using the superposition model are presented and discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Probabilistic and Robust Engineering Design · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. P.E. McDonald, V.N. Shah, Steam Generator Tube Failure, U.S. Nuclear Regulatory Commission Report NUREG/CR-6365, 2000, pp. 1–76.
2. Ko · J. Pressure Vessel Technol. · 1984 · 106 · 6910.1115/1.3264311 ↗
3. Guerout · J. Pressure Vessel Technol. · 1999 · 121 · 30410.1115/1.2883707 ↗
4. Taylor · J. Pressure Vessel Technol. · 1998 · 120 · 28310.1115/1.2842059 ↗
5. Shah · 1993
6. Berge · Nucl. Technol. · 1981 · 55 · 8810.13182/NT81-A32833 ↗
7. Airey · Nucl. Technol. · 1981 · 55 · 43610.13182/NT55-436 ↗
8. Page · Corrosion · 1983 · 39 · 40910.5006/1.3593883 ↗
9. Page · Metall. Trans. · 1986 · 17A · 87710.1007/BF02643864 ↗
10. McMinn · Corrosion · 1988 · 44 · 23910.5006/1.3583932 ↗
11. Kai · Metall. Trans. · 1989 · 20A · 205710.1007/BF02650292 ↗
12. Choi · Corrosion · 1992 · 46 · 100
13. Angeliu · Metall. Trans. · 1990 · 21A · 209710.1007/BF02647868 ↗
14. Yu · Corrosion · 1990 · 46 · 39110.5006/1.3585123 ↗
15. Was · Corrosion · 1990 · 46 · 31910.5006/1.3585110 ↗
16. Diano · J. Nucl. Mater. · 1989 · 168 · 29010.1016/0022-3115(89)90594-1 ↗
17. Harrod · 1989 · A-1
18. Fuchs · Scripta Metall. · 1991 · 25 · 148310.1016/0956-716X(91)90437-6 ↗
19. C.F. Lo, W.E. Mayo, S. Weissman, Tensile Deformation and Recovery Kinetics of Alloy 690, EPRI Report, TR-100910, 1992.
20. Bruemmer · Scripta Metall. · 1986 · 20 · 90910.1016/0036-9748(86)90465-5 ↗
21. Bruemmer · Corrosion · 1988 · 44 · 78210.5006/1.3584948 ↗
22. Shalaby · Corrosion · 1988 · 44 · 90510.5006/1.3584964 ↗
23. United States Nuclear Regulatory Commission, Environmentally Assisted Cracking in Light-Water Reactors, NUREG/CR-4667, vol. 27, ANL-99/11, Semiannual Report July 1998–December 1998, Argonne National Laboratory, Office of Nuclear Regulatory Research, Washington, DC, October 1999, pp. 46–54.
24. United States Nuclear Regulatory Commission, Effects of Alloy Chemistry, Cold Work, and Water Chemistry on Corrosion Fatigue and Stress Corrosion Cracking of Nickel Alloys and Welds, NUREG/CR-6721, ANL-01/07, Argonne National Laboratory, Office of Nuclear Regulatory Research, Washington, DC, April 2001, pp. 5–18.
25. Anderson · 1995
26. W.A. Van Der Sluys, B.A. Young, D. Doyle, Corrosion Fatigue Properties of Alloy 690 and some Nickel Based Weld Metals, ASME PVP 2000. PVP 410-12, Seattle, Washington, p. 85, 2000.