journal article·2008-06

The effect of hot pressing time on the microstructure and properties of Laves phase NbCr2 alloys

X. Xiao, S.Q. Lu, P. Hu, M.G. Huang, X.W. Nie, M.W. Fu

Materials Science and Engineering: A· Volume 485· Issue 1-2
Publisher page

Abstract

Abstract The microstructure and properties were investigated on the Laves phase NbCr 2 alloys prepared through 20 h mechanical alloying of niobium and chromium powders and subsequent hot pressing at 1250 °C for different time. The results indicate that the Laves phase NbCr 2 alloy with homogeneous microstructure and fine grains and high relative density is obtained. With the increase of hot pressing time, the density, grain size and Vickers hardness increase, the fracture toughness, however, decreases gradually. The alloy fabricated by hot pressing at 1250 °C for 30 min has the best overall properties. Its average grain size reaches about 248 nm, the relative density is 97.8% and the fracture toughness at room temperature is more than 4.7 MPa m 1/2 . Compared with the Laves phase NbCr 2 alloy prepared by arc-melting, which has the fracture toughness of 1.2 MPa m 1/2 , the fracture toughness in this research is increased significantly.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Chan · JOM · 1996 · 9 · 6210.1007/BF03223078 ↗
2. Lu · Mater. Eng. · 2003 · 5 · 43
3. Takeyama · Mater. Sci. Eng. · 1991 · A132 · 6110.1016/0921-5093(91)90361-P ↗
4. Lu · Mater. Rev. · 2003 · 17 · 11
5. Thoma · Mater. Sci. Eng. · 2002 · A329 · 40810.1016/S0921-5093(01)01614-8 ↗
6. Fujita · J. Alloys Compd. · 2006 · 424 · 28310.1016/j.jallcom.2005.11.087 ↗
7. Takasugi · Mater. Sci. Eng. A · 1995 · 192/193 · 80510.1016/0921-5093(94)03319-6 ↗
8. Yoshida · Intermetallics · 2002 · 10 · 8510.1016/S0966-9795(01)00107-8 ↗
9. Suryanarayana · Progr. Mater. Sci. · 2001 · 46 · 110.1016/S0079-6425(99)00010-9 ↗
10. Lu · Acta Aeronautica Astronautica Sinica · 2003 · 24 · 568
11. Lu · 2003
12. Lu · Rare Met. Mater. Eng. · 2006 · 35 · 1535
13. Lu · Powder Metall. Technol. · 2006 · 24 · 359
14. Lee · Mater. Sci. Eng. A · 1999 · 268 · 18410.1016/S0921-5093(99)00068-4 ↗
15. Yin · Powder Metall. Technol. · 2004 · 22 · 151
16. Ohta · J. Mater. Sci. · 2003 · 38 · 65710.1023/A:1021807519728 ↗
17. Liu · Intermetallics · 2000 · 8 · 111910.1016/S0966-9795(00)00109-6 ↗