Notch strength and notch sensitivity of polymethyl methacrylate glasses
Source abstract
Abstract
In this study, attempts are made to obtain the approaches for quantitatively evaluating the notch sensitivity and the notch strength of polymethyl methacrylate (PMMA) glasses. Tension tests show that the unoriented PMMA glass is a low-ductility material and the oriented PMMA glass is a high-ductility one, and the orientation of PMMA glass greatly increases the fracture ductility. The notch sensitivity of PMMA glasses can be evaluated by the so-called notch sensitivity factor, which can be predicted from tensile properties. Test results and analysis show that the notch strength of PMMA glasses can be expressed by the equation for notch strength and predicted from tensile properties for the notched elements of PMMA glass with any given stress concentration factor. The orientation of PMMA glass decreases the notch sensitivity and increases the notch strength. It should be noted that PMMA glasses have higher notch sensitivity and lower notch strength than those of ductile metals because of the very low-elasticity modulus of PMMA glasses. It also shows the possibility of predicting the failure criteria with given survivability for PMMA glass notched elements in this paper.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Analysis of Composite Materials · Textile materials and evaluations · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Hertzberg · 1989
2. Fundamental processes of craze growth and fracture10.1007/BFb0018018 ↗
3. Rabinowitz · J. Mater. Sci. · 1974 · 9 · 8110.1007/BF00554758 ↗
4. Deng · 1995 · 248
5. Ferry · 1980
6. Kisloch · 1983
7. Davenport · Fat. Fract. Eng. Mater. Struct. · 1993 · 16 · 112510.1111/j.1460-2695.1993.tb00082.x ↗
8. Wang · Acta Aeronautica et Astronautica Sinica · 2001 · 22 · 83
9. Wang · PTCA Part A · 2000 · 36 · 435
10. M.O. Speidel, Fatigue crack growth at high temperature, in: High Temperature Materials in Gas Turbines, Elsevier, Amsterdam, 1977.
11. Davenport · ASTM STP · 1995 · 1244 · 344
12. Dunn · Int. J. Solids Struct. · 1997 · 34 · 387310.1016/S0020-7683(96)00236-3 ↗
13. Cho · Polym. Eng. Sci. · 1997 · 37 · 121710.1002/pen.11766 ↗
14. Smith · Int. J. Eng. Sci. · 2000 · 38 · 115310.1016/S0020-7225(99)00066-X ↗
15. J.H. Yan, Fatigue and fracture properties of materials and statistical analysis, Ph.D. Dissertation, Northwestern Polytechnical University (NPU), Xi'an, China, 1999 (in Chinese).
16. H. Wang, On the fatigue and fracture performance of organic glass used in aircraft, Thesis for Master Degree, Northwestern Polytechnical University (NPU), Xi'an, China, 1999 (in Chinese).
17. Wang · J. Mech. Strength · 2001 · 23 · 131
18. Zhang · 1984
19. Zheng · 2000
20. Zheng · Eng. Fract. Mech. · 1989 · 33 · 68510.1016/0013-7944(89)90067-2 ↗
21. Notch analysis of fracture
22. Meng · J. Mater. Sci. · 2000 · 35 · 148110.1023/A:1004724712818 ↗
23. Zhao · Mech. Strength · 1998 · 20 · 250
24. Zheng · Eng. Fract. Mech. · 1993 · 44 · 52110.1016/0013-7944(93)90092-7 ↗
25. Den · 1995
26. Richie · Met. Trans. A · 1976 · 7 · 83110.1007/BF02644080 ↗
27. Wang · J. Inorg. Mater. · 1997 · 12 · 218
28. Bertolotti · J. Am. Ceram. Soc. · 1973 · 56 · 10710.1111/j.1151-2916.1973.tb12373.x ↗
29. W.F. Brown Jr., J.E. Srawley, ASTM STP 410 (1966).10.1080/00221346608985158 ↗