Theoretical and experimental study of the contact fatigue behavior of a Mo–Cu steel produced by powder metallurgy
Source abstract
Abstract
Abstract A conservative approach to predict the contact fatigue behavior of a Powder Metallurgy steel, in the sinter-hardened condition and after shot peening, was proposed. It is based on the assumption that the contact fatigue crack nucleation is anticipated by the local plastic deformation of the material, which occurs when the maximum local stress exceeds the yield strength of the matrix. A model to predict contact fatigue crack nucleation has been proposed and validated by experiments. A local approach is used, based on the characteristics of the largest pores, which promote fatigue crack nucleation, and on the microhardness of the microstructural constituents where they are localized. Shot peening improves the contact fatigue resistance of the sinterhardened steel by 30%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Metal Alloys Wear and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Mao · Surf. Eng. · 1994 · 10 · 29710.1179/sur.1994.10.4.297 ↗
2. Santus · Int. J. Fatigue · 2012 · 45 · 7110.1016/j.ijfatigue.2012.06.012 ↗
3. Šraml · Int. J. Fatigue · 2003 · 25 · 58510.1016/S0142-1123(03)00019-7 ↗
4. C.M. Sonsino, K. Lipp, Rolling contact fatigue properties of selected PM materials of gear-box applications, Paper no. 990333, SAE International Congress and Exhibition, Detroit, Michigan, March 1–4, 1999.10.4271/1999-01-0333 ↗
5. K. Lipp, C.M. Sonsino, D. Pohl, Rolling contact fatigue behaviour of sintered steels – endurable hertzian pressures and damage mechanisms, in: Proceedings of Powder Metallurgy World Congress and Exhibition, vol. 3, Granada, Spain, EPMA, Shrewsbury, UK, 18–22 October 1998, pp. 143–148.
6. C.M. Sonsino, Concepts and required materials data for fatigue design of PM components, in: Proceedings of Euro-PM2001, vol. 2, Nice, France, EPMA, Shrewsbury, UK, 22–24 October 2001, pp. 80–109.
7. Polasik · Adv. Powder Metall. Part. Mater. · 2001 · 10 · 10
8. Gerard · Int. J. Powder Metall. · 1990 · 26 · 337
9. Hadrboletz · Int. Mater. Rev. · 1997 · 42 · 110.1179/imr.1997.42.1.1 ↗
10. Christian · Int. J. Powder Metall. · 1995 · 31 · 51
11. Chawla · Mater. Sci. Eng. A · 2005 · 390 · 9810.1016/j.msea.2004.08.046 ↗
12. Andersson · Powder Metall. Prog. · 2011 · 11 · 21
13. C. Menapace, E. Santuliana, A. Molinari, Plane bending fatigue resistance of low pressure carburized Cr–Mo sintered steels, in: Proceedings of EuroPM2011, vol. 3, Barcellona, EPMA, Shrewsbury, UK, 9–12 October 2011, pp. 289–294.
14. Santuliana · Int. J. Powder Metall. · 2011 · 47 · 38
15. Sauermann · Adv. Powder Metall. Part. Mater. · 2008 · 10 · 21
16. Sauermann · Adv. Powder Metall. Part. Mater. · 2007 · 10 · 35
17. Molinari · Mater. Sci. Eng. A · 2011 · 528 · 290410.1016/j.msea.2010.12.072 ↗
18. Donzella · Int. J. Fatigue · 2010 · 32 · 25610.1016/j.ijfatigue.2009.06.016 ↗
19. Straffelini · Metall. Mater. Trans. A · 2000 · 31 · 309110.1007/s11661-000-0088-0 ↗
20. Danninger · Powder Metall. Int. · 1993 · 25 · 170
21. Exner · Powder Metall. Int. · 1978 · 10 · 193
22. Eudier · Powder Metall. · 1962 · 9 · 27810.1179/pom.1962.5.9.005 ↗
23. Ashby · 1988
24. Danninger · Adv. Powder Metall. Part. Mater. · 1992 · 5 · 227
25. Molinari · Powder Metall. Prog. · 2011 · 11 · 12
26. Johnson · 1985
27. Bell · Surf. Eng. · 1990 · 6 · 13310.1179/sur.1990.6.2.133 ↗
28. Metinöz · La Metall. Italiana · 2014