journal article·2011-01

Thermally activated relaxation behaviour of shot-peened tool steels for cutting tool body applications

Anna Medvedeva, Jens Bergström, Staffan Gunnarsson, Pavel Krakhmalev

Publisher page

Abstract

Surface residual stress, microstrain and domain size were determined using X-ray diffraction in shot-peened low-alloyed and hot-work tool steels subjected to varying temperatures (200–600 °C) and times (0.5–50 h). The stress relaxation was directly related to microstrain decrease and domain size increase.The Zener–Wert–Avrami function was used to model the relaxation behaviour. The mechanism responsible for the relaxation behaviour is proposed to be diffusion-controlled as the activation energies for stress and microstrain relaxation were close to the activation enthalpy for lattice self-diffusion of alpha-iron.The relaxation rate varied over time and temperature. At temperatures up to 300 °C, the relaxation rate was insignificant in all the steels. In the temperature range of 300–400 °C and 400–550 °C for low-alloyed and hot-work tool steels, respectively, the stresses decreased at a similar rate with increasing time and temperature. At the tempering temperatures of the steels, the stress relaxation was controlled by microstructure transformations. A stress relaxation stabilization was found in one of hot-work steels between 450 and 500 °C at annealing times longer than 3 h.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Treatment and Residual Stress · Metal Alloys Wear and Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. A. Medvedeva, Tool Steel for Tool Holder Applications – Microstructure and Mechanical Properties. Licentiate Thesis, Karlstad University, Karlstad, 2008.
2. Stress relaxation resistance for improved fatigue performance of shot-peened tool components
3. Löhe · 2002 · 54
4. Humpreys · 2002
5. Thermal relaxation of shot peening residual stresses in the differently heat treated plain carbon steel Ck 45
6. Holzapfel · Mater. Sci. Eng. A · 1998 · 248 · 910.1016/S0921-5093(98)00522-X ↗
7. Nikitin · Scripta Mater. · 2008 · 58 · 23910.1016/j.scriptamat.2007.09.045 ↗
8. Thermal relaxation of residual stresses induced by shot peening in IN718
9. Juijerm · Mater. Sci. Eng. A · 2007 · 452–453 · 47510.1016/j.msea.2006.10.074 ↗
10. Stress relaxation resistance for improved fatigue performance of shot-peened tool components
11. Medvedeva · 2009 · 697
12. Noyan · 1987
13. Seifert Analytical X-ray, Autoquan, version 2.60. Rich. Seifert & Co., Germany, 2001.
14. J. Bergström, Residual Stress and Microstructural Behaviour of a Shot-Peened Steel in Fatigue. Dissertation, Linköping University, Linköping, 1986.
15. Hoffmann · Mater. Sci. Eng. A · 2001 · 319–321 · 29910.1016/S0921-5093(01)00978-9 ↗
16. Lide · 2004
17. Hull · 2001
18. Murty · J. Nucl. Mater. · 2008 · 382 · 21710.1016/j.jnucmat.2008.08.008 ↗
19. Medvedeva · Mater. Sci. Eng. A · 2009 · 523 · 3910.1016/j.msea.2009.06.010 ↗
20. Hong · Int. J. Fatigue · 2005 · 27 · 142010.1016/j.ijfatigue.2005.06.037 ↗
21. Hertzberg · 1996