Strength of AISI 316L in torsion at high temperature
Source abstract
Abstract
Hot torsion flow behaviour of 30 mu m grained AISI 316L stainless steel was investigated in the range of temperatures 850-1100 degrees C with equivalent strain rates 0.0001-0.006s(-1). For temperatures higher than 900 degrees C the material presented an unusual linear relationship at low strains between equivalent stress, sigma(Eq), and equivalent strain, epsilon(Eq), whilst at 850 degrees C a parabolic sigma(Eq)-epsilon(Eq) relationship was observed. The flow behaviour of 100 mu m grained AISI 316L stainless steel torsionally deformed at 1000 degrees C with equivalent strain rate of 0.006s(-1) was reported to follow the expected parabolic sigma(Eq)-epsilon(Eq) relationship and produced a significantly higher flow stress than the 30 mu m grained material (about 40% higher at 0.5 equivalent strain). In both materials an unusual grain shape evolution from pre-deformation equiaxed to rhomboidal was observed during torsion, which was rationalised [G. Angella, B.P. Wynne, W.M. Rainforth, J.H. Beynon, Acta Mater. 53 (2005) 1263] in terms of strain induced grain boundary migration (SIGBM) combined with the torsion stress field. A qualitative model is proposed to describe the flow behaviour of the AISI 316L stainless steel based on the unusual grain structure evolution and, in turn, on SIGBM.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Angella · Acta Mater. · 2005 · 53 · 126310.1016/j.actamat.2004.10.047 ↗
2. Bell · J. Mater. Sci. · 1968 · 3 · 52410.1007/BF00549736 ↗
3. Hashimoto · Scripta. Metall. · 1989 · 23 · 185510.1016/0036-9748(89)90471-7 ↗
4. Miura · Scripta. Mater. · 2003 · 48 · 150110.1016/S1359-6462(03)00053-8 ↗
5. Beck · J. Appl. Phys. · 1950 · 21 · 15010.1063/1.1699614 ↗
6. Bailey · Proc. Roy. Soc. London, Ser. A · 1961 · 267 · 1110.1098/rspa.1962.0080 ↗
7. Humphreys · 1996
8. Escher · Acta Mater. · 1998 · 46 · 52510.1016/S1359-6454(97)00264-4 ↗
9. Gottstein · Z. Metallkd. · 2003 · 94 · 62810.3139/146.030628 ↗
10. Miura · Scripta. Mater. · 2004 · 51 · 67110.1016/j.scriptamat.2004.06.015 ↗
11. G. Angella, Strain path, flow stress and microstructure evolution of an austenitic stainless steel at high temperature, Ph.D. Thesis, Department of Mechanical Engineering, The University of Sheffield, Sheffield, UK, 2002.
12. Barraclough · J. Test. Eval. · 1973 · 1 · 22010.1520/JTE10007J ↗
13. Pöhlandt · Arch. Eisenhüttenwes. · 1984 · 55 · 14910.1002/srin.198405327 ↗
14. Richardson · 1985
15. Pöhlandt · Mater. Sci. Technol. · 1985 · 1 · 97210.1179/mst.1985.1.11.972 ↗
16. M. Hatherley, W.B. Hutchinson, An Introduction to Textures in Metals (Monograph No. 5), The Institute of Metals, London, UK, 1979.
17. Kocks · 1998
18. Van Houtte · 2000
19. Kocks · Prog. Mater. Sci. · 2003 · 48 · 17110.1016/S0079-6425(02)00003-8 ↗
20. Ryan · Can. Metall. Quart. · 1990 · 29 · 14710.1179/cmq.1990.29.2.147 ↗
21. Poliak · Acta Mater. · 1996 · 44 · 12710.1016/1359-6454(95)00146-7 ↗
22. Canova · Acta Metall. · 1984 · 32 · 21110.1016/0001-6160(84)90050-6 ↗
23. Rollett · 1987
24. Sevillano · Mater. Sci. Eng. A · 1987 · 86 · 3510.1016/0025-5416(87)90441-1 ↗
25. Frost · 1982
26. Morris · Met. Sci. J. · 1978 · 52510.1179/msc.1978.12.11.525 ↗
27. Mecking · Acta Metall. Mater. · 1981 · 29 · 186510.1016/0001-6160(81)90112-7 ↗
28. Sevillano · Prog. Mater. Sci. · 1981 · 25 · 6910.1016/0079-6425(80)90001-8 ↗
29. Argon · Acta Metall. Mater. · 1993 · 41 · 328910.1016/0956-7151(93)90058-Z ↗
30. Ungár · Scripta. Mater. · 1996 · 35 · 146710.1016/S1359-6462(96)00320-X ↗