Analysis of the interface and mechanical properties of field-assisted sintered duplex stainless steels
Source abstract
Abstract
The development of duplex stainless steels produced by powder metallurgy represents an interesting alternative to conventional fabrication routes, since typical routes imply a strict control of composition and temperature during the processing path in order to avoid undesirable brittle phases. This work proposes a sintering route, designated as field-assisted hot pressing technique, in which an alternating current is applied to consolidate duplex stainless steels with different initial austenite percentages, always higher than ferrite. In all the cases, a thin and hard planar interface composed by two different microconstituents is generated between austenite and ferrite, growing inside the ferritic phase. The good mechanical properties achieved by these field-assisted sintered duplex stainless steels, in terms of nanohardness, elastic modulus, yield strength, ultimate tensile stress and ductility, establish these steels as promising candidates to be introduced in the market.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Recent developments in stainless steels10.1016/j.mser.2009.03.001 ↗
2. J. Charles, The duplex stainless steels: materials to meet your needs, in: Proceedings of the Duplex Stainless Steels 91 Conference, Beaune, France, 1991, pp. 3–48.
3. J. Charles, 10 years later obviously duplex grades in industrial applications look like a success story, in: Proceedings of the 6th World Duplex Conference and Expo, Venice, Italy, 2000, pp. 1–12.
4. Practical Guidelines for the Fabrication of Duplex Stainless Steels, second ed., Published by the International Molybdenum Association (IMOA), London, UK, 2009.
5. Powder metallurgical duplex austenitic-ferritic stainless steels from prealloyed and mixed powders10.1179/pom.1994.37.1.57 ↗
6. Sintering transformations in mixtures of austenitic and ferritic stainless steel powders10.1179/003258901666167 ↗
7. Effect of weld metal chemistry and heat input on the structure and properties of duplex stainless steel welds10.1016/S0921-5093(03)00077-7 ↗
8. Kinetics of sigma phase formation in a duplex stainless steel10.1590/S1516-14392009000300012 ↗
9. Effect of ferrite-to-austenite phase transformation path on the interface crystallographic character distributions in a duplex stainless steel10.1016/j.actamat.2017.11.057 ↗
10. Hot tensile properties of 25Cr-8Ni duplex stainless steel containing cellular (σ+γ2) structure after various thermal treatments10.1016/S0921-5093(97)00077-4 ↗
11. Fatigue crack propagation in austeno-ferritic duplex stainless steel 22 Cr 5 Ni10.1016/S0142-1123(99)00076-6 ↗
12. Effects of aging at 475 °C on corrosion properties of tungsten-containing duplex stainless steels10.1016/S0010-938X(02)00079-3 ↗
13. Corrosion behaviour of duplex stainless steels sintered in nitrogen10.1016/j.corsci.2008.10.003 ↗
14. Study of the interfaces between austenite and ferrite grains in P/M duplex stainless steels10.1016/S0955-2219(03)00293-0 ↗
15. Effect of ageing heat treatments on the microstructure and intergranular corrosion of powder metallurgy duplex stainless steels10.1016/j.corsci.2010.07.023 ↗
16. M. Cazzolli, (Ph.D. Thesis), University of Trento, 2015.
17. Constitution diagram for stainless steel weld metal
18. Ni diffusion process between austenite and ferrite in a sintered duplex stainless steel obtained by powder mixing10.4028/www.scientific.net/MSF.426-432.4343 ↗
19. Study and suppression of the microstructural anisotropy generated during the consolidation of a carbonyl iron powder by field assisted hot pressing10.1007/s11661-015-2919-z ↗
20. Petzow · 1999 · 185
21. Underwood · 1970 · 73
22. Oliver · J. Mater. Res. · 1992 · 7 · 156410.1557/JMR.1992.1564 ↗
23. Self diffusion in iron10.1016/0001-6160(61)90137-7 ↗
24. Mechanical properties of powder metallurgy duplex stainless steels10.1179/mst.1997.13.2.103 ↗
25. Calculation of impurity diffusivities in α-Fe using first-principles methods10.1016/j.actamat.2009.11.041 ↗
26. Andrej · 1995
27. Effect of ferrite-to-austenite phase transformation path on the interface crystallographic character distributions in a duplex stainless steel10.1016/j.actamat.2017.11.057 ↗
28. Nucleation and variant selection during the α–γ–α phase transformation in microalloyed steel10.1016/j.actamat.2010.11.017 ↗
29. H. Oikawa, Lattice diffusion in iron-a review, Technology Reports of the Tohoku University, vol. 48, 1983, pp. 7–77.
30. Sintered duplex stainless steels from premixes of 316L and 434L powders10.1016/S0254-0584(00)00477-6 ↗
31. Chemical volume diffusion coefficients for stainless steel corrosion studies10.1007/BF01161455 ↗
32. Role of interfaces in duplex stainless steels deformation micromechanisms10.1163/156855406774964328 ↗
33. Effect of residual stresses on individual phase mechanical properties of austeno-ferritic duplex stainless steel10.1016/j.actamat.2006.06.035 ↗
34. Hall · Proc. Phys. Soc. B · 1951 · 64 · 74710.1088/0370-1301/64/9/303 ↗
35. Petch · J. Iron Steel Inst. · 1953 · 174 · 25
36. Influence of sinter-cooling rate on the mechanical properties of powder metallurgy austenitic, ferritic and duplex stainless steels sintered in vacuum10.1016/j.msea.2015.06.097 ↗
37. 1998