journal article·2018-10

Mechanical properties and microstructure in a fine grained Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy deformed at a high strain rate

Bingfeng Wang, XianRui Yao, Lanyi Liu, Xiaoyong Zhang, Xu Ding

Publisher page

Abstract

Abstract Shear localization is the main failure mechanism of the Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy deformed at a high strain rate. Double peaks appear on the curves of the strain and the stress during the shear localization process when the phase transformation occurs. Widths of the shear bands are affected by the nominal strain of the specimens and the treatment temperature. Microstructure of a shear band in the fine grained Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy was investigated by Scanning Electron Microscopy and High Resolution Transmission Electron Microscopy. Grains in the boundary of the shear band are highly elongated along the shear direction, and the core of the shear band consists of ultrafine equiaxed grains with sizes 0.1–0.5 µm and with low density of dislocations. Sizes of the grains in the shear band obtained at the cryogenic temperature are smaller than those in the shear band obtained at the room temperature. Evidences of the grain boundaries of the elongated grains and the ultrafine equiaxed grains indicate that the microstructure of the shear band are formed by the way of the rotational dynamic recrystallization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and mechanical properties · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Microstructure and high cycle fatigue fracture surface of a Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy10.1016/j.msea.2013.03.047 ↗
2. The effect of cooling rates on the microstructure and mechanical properties of thermo-mechanically processed Ti–Al–Mo–V–Cr–Fe alloys10.1016/j.msea.2013.03.083 ↗
3. Effects of extrusion ratio on microstructural evolution and mechanical behavior of in situ synthesized Ti-6Al-4V composites10.1016/j.msea.2017.02.002 ↗
4. Microstructure and mechanical properties of TC4 alloy modified and reinforced by TiB+TiN/Ti inoculants ribbons10.1016/j.msea.2016.03.099 ↗
5. Relationship between lamellar alpha evolution and flow behavior during isothermal deformation of Ti-5Al-5Mo-5V-1Cr-1Fe near beta titanium alloy10.1016/j.msea.2012.08.074 ↗
6. Performance evaluation of cryogenic cooling in reaming titanium alloy10.1080/10426914.2016.1176187 ↗
7. Formation and crystallography of nano/ultrafine-trimorphic structure in metastable beta titanium alloy Ti-5Al-5Mo-5V-3Cr-0.5Fe processed by dynamic deformation at low temperature10.1016/j.matchar.2017.06.005 ↗
8. Dodd · 2012
9. Dissipation in adiabatic shear bands10.1016/0167-6636(94)90066-3 ↗
10. Synthesis and mechanical behavior of nanostructured materials via cryomilling10.1016/j.pmatsci.2005.04.004 ↗
11. Evaluation of mechanical properties and anisotropy of ultra-fine grained 1050 aluminum sheets produced by incremental ECAP10.1016/j.matdes.2017.05.069 ↗
12. Fracture toughness at cryogenic temperatures of ultrafine - grained Ti-6Al-4V alloy processed by ECAP10.1016/j.msea.2017.12.106 ↗
13. Multi-scale crystal plasticity finite element method (CPFEM) simulations for shear band development in aluminum alloys10.1016/j.jallcom.2017.03.333 ↗
14. Evolution of precipitates in ZK60 magnesium alloy during high strain rate deformation10.1016/j.jallcom.2017.02.158 ↗
15. Recrystallization kinetics within adiabatic shear bands10.1016/S1359-6454(96)00193-0 ↗
16. Microstructural evolution associated with shear location of AISI 52100 under high strain rate loading10.1016/j.msea.2016.03.050 ↗
17. Dynamic deformation and failure of ultrafine-grained titanium10.1016/j.actamat.2016.11.041 ↗
18. Adiabatic shear localization in a near beta Ti–5Al–5Mo–5V–1Cr–1Fe alloy10.1016/j.msea.2015.05.043 ↗
19. Microstructural evolution in adiabatic shear localization in stainless steel10.1016/S1359-6454(02)00526-8 ↗
20. Amorphization of titanium nickelide by means of shear under pressure and crystallization at the subsequent heating10.4028/www.scientific.net/MSF.738-739.525 ↗
21. Deformation-induced grain refinement and amorphization in Ti-10V-2Fe-3Al alloy10.1007/s11661-011-0856-z ↗
22. Microstructure, texture and mechanical studies of an inconspicuous shear band formed during hot compression of Ti-6Al-4V alloy10.1016/j.msea.2017.05.041 ↗
23. Shear localization and recrystallization in high-strain, high-strain-rate deformation of tantalum10.1016/S0921-5093(96)10847-9 ↗
24. Capturing of the propagating processes of adiabatic shear band in Ti-6Al-4V alloys under dynamic compression10.1016/j.msea.2016.01.062 ↗
25. Microstructure and texture evolution in 21Mn–2.5Si–1.6Al–Ti steel subjected to dynamic impact loading10.1016/j.msea.2014.11.017 ↗
26. Self-organization of adiabatic shear bands in ZK60 Magnesium alloy10.1016/j.msea.2016.01.008 ↗
27. Dynamic recrystallization in high-strain, high-strain-rate plastic deformation of copper10.1016/0956-7151(94)90417-0 ↗
28. Shear localization and microstructure in coarse grained beta titanium alloy10.1016/j.msea.2015.11.102 ↗
29. Shear localization and its related microstructural evolution in the ultrafine grained titanium processed by multi-axial compression10.1016/j.msea.2014.06.042 ↗
30. The genesis of adiabatic shear bands10.1038/srep37226 ↗