Compression properties enhancement of Al-Cu alloy solidified under a 29 T high static magnetic field
Source abstract
Abstract
Abstract Bulk solidification of Al-40 wt% Cu hypereutectic alloy has been investigated using a high static magnetic field (HSMF). The results show that, by imposing a 29 T HSMF, the melt convection has been completely suppressed in the mushy zone and the whole scale. The primary Al2Cu faceted phase changed to non-faceted phase because of the growth enhancement of Al2Cu precipitates. Al-Al2Cu eutectic was destabilized as a coexisting of lamellar and rod-like α-Al phase under 0 T whereas it was stabilized as a lamellae under the 29 T HSMF. The dimension of primary Al2Cu precipitates has been refined. The interlamellar spacing of eutectic Al-Al2Cu structure has been reduced from 6.3 µm to 2–3 µm. The primary Al2Cu precipitates were almost oriented to its crystal direction which was parallel to the direction of the vertical HSMF. The morphologies of shrinkages displays as approximately regular spheres. Compressive strength of Al-40 wt% Cu alloy has been enhanced from 248 MPa to 431 MPa and the maximum stain has been improved from 3.6% to 5%. This paper reveals the effect of HSMF on Al2Cu precipitates, provides a new sight about refinement theory and new pathway to fabricate brittle materials with excellent mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Precipitation Hardening in the first aerospace aluminum Alloy: the wright flyer crankcase10.1126/science.266.5187.1015 ↗
2. Rapid manufacturing of aluminum components10.1126/science.1086989 ↗
3. Mechanical properties of large quasicrystals in the Al-Cu-Li system10.1038/327609a0 ↗
4. Microalloying ultrafine grained Al alloys with enhanced ductility10.1038/srep03605 ↗
5. The effect of Al2Cu precipitates on the microstructural evolution, tensile strength, ductility and work-hardening behaviour of a Al-4 wt% Cu alloy processed by equal-channel angular pressing10.1016/j.actamat.2012.09.038 ↗
6. On precipitate induced hardening in crystal plasticity theory10.1016/S0749-6419(03)00098-6 ↗
7. Crystalline defects in a BCT Al2Cu(θ) single crystal obtained by unidirectional solidification along [001]10.1002/1521-396X(200211)194:1<173::AID-PSSA173>3.0.CO;2-P ↗
8. Anisotropic tensile properties of a lamellar Al-CuAl2 eutectic composite10.1007/BF03161841 ↗
9. Eutectic alloy solidification10.1016/0079-6425(63)90037-9 ↗
10. Plastic behaviour of CuAl210.1007/BF01119763 ↗
11. A new approach for ductile fracture prediction on Al 2024-T351 alloy10.1016/j.ijplas.2012.01.003 ↗
12. Effect of rapid solidification on mechanical properties of Cu-Al-Ni shape memory alloys10.1007/BF00540706 ↗
13. Influences of microstructure and orientation on fracture toughness of intermetallic phase Al2Cu-based alloy under directional solidification10.1111/ffe.12388 ↗
14. Creep of the lamellar Al-CuAl2 composite10.1002/pssa.2210490232 ↗
15. Structure and mechanical properties of Al-40% Cu directionally solidified alloy10.1002/mawe.19770081007 ↗
16. Mechanical behavior of rapidly solidified Al-Al2Cu and Al-Al3Ni composites10.1007/BF02813263 ↗
17. Fabrication and thermoelectric properties of c-axis-aligned Bi0.5Sb1.5Te3 with a high magnetic field10.1016/j.actamat.2011.04.040 ↗
18. Influence of an axial high magnetic field on the liquid–solid transformation in Al-Cu hypoeutectic alloys and on the microstructure of the solid10.1016/j.actamat.2006.10.007 ↗
19. Formation of aligned two-phase microstructures by applying a magnetic field during the austenite to ferrite transformation in steels10.1016/S1359-6454(03)00106-X ↗
20. Control of precipitating phase alignment and crystal orientation by imposition of a high magnetic field10.2320/matertrans1989.39.814 ↗
21. Alignment of BiMn crystal orientation in Bi-20 at% Mn alloys by laser melting under a magnetic field10.2320/matertrans.44.2550 ↗
22. Structure, growth characteristic and magnetic properties in directionally solidified Bi-MnBi composite under strong magnetic field10.1016/j.actamat.2011.06.040 ↗
23. Effect of a high magnetic field on the Al-Al3Ni fiber eutectic during directional solidification10.1016/j.actamat.2009.12.029 ↗
24. Dynamic effects in the lamellar–rod eutectic transition10.1016/j.actamat.2011.01.050 ↗
25. Eutectic and peritectic solidification patterns10.1016/j.cossms.2015.10.002 ↗
26. Stability of lamellar eutectic growth10.1016/j.actamat.2007.11.037 ↗
27. Pearling and pinching: propagation of rayleigh instabilities10.1103/PhysRevLett.78.2555 ↗
28. Refinement and growth enhancement of Al2Cu phase during magnetic field assisting directional solidification of hypereutectic Al-Cu alloy10.1038/srep24585 ↗
29. EBSD study of the morphology and orientation of the primary and eutectic phases in Al-Cu alloys during solidification under a strong magnetic field10.1107/S1600576715021731 ↗
30. Moreau · 1990 · 111
31. Magnetic field effects on float-zone Si crystal growth: II. Strong transverse fields10.1016/0022-0248(86)90015-1 ↗
32. Anisotropic effect of magneto hydro-dynamics on metal solidification10.2355/isijinternational.30.34 ↗
33. Directional solidification of aluminum-copper alloys in a magnetic field10.1139/p66-010 ↗
34. Effect of static magnetic field on microstructure and interdiffusion behavior of Fe/Fe–Si alloy diffusion couple10.1016/j.jallcom.2015.04.226 ↗
35. Effect of high magnetic field on diffusion behavior of aluminum in Ni-Al alloy10.1016/j.matlet.2013.06.116 ↗
36. Modification of interdendritic convection in directional solidification by uniform magnetic field10.1016/S1359-6454(98)00064-0 ↗
37. Pinch-off of rods by bulk diffusion10.1016/j.actamat.2011.04.036 ↗
38. Universality and self-similarity in pinch-off of rods by bulk diffusion10.1038/nphys1737 ↗
39. Morphological instabilities of lamellar eutectics10.1007/BF02648952 ↗
40. Growth and morphology of rod eutectics10.1016/j.actamat.2008.02.011 ↗
41. The surface tension of water under high magnetic fields10.1063/1.2940128 ↗
42. Surface tension of heavy water under high magnetic fields10.1063/1.3167767 ↗
43. Effect of magnetic field on solidification in Cu-Pb monotectic alloys10.2355/isijinternational.43.942 ↗
44. Effects of high static magnetic field on distribution of solid particles in BiZn immiscible alloys with metastable miscibility gap10.1016/j.jallcom.2014.10.095 ↗
45. Size effects in materials due to microstructural and dimensional constraints: a comparative review10.1016/S1359-6454(98)00231-6 ↗