journal article·2018-04

Microstructure and mechanical properties of foundry Al-Si-Cu-Hf alloy

Yuan Xing, Zhihong Jia, Jiehua Li, Lipeng Ding, Huilan Huang, Qing Liu

Publisher page

Abstract

Abstract Solidification microstructure, precipitation microstructure, and mechanical properties of foundry Al-Si-Cu-Hf alloy were investigated to elucidate the role of Hf during the solidification and precipitation processes. In the as-casting condition, α-Al dendrites, eutectic Si phases, and intermetallic compounds (Al2Cu, the needle-like β-Fe and Chinese-script α-Fe) were observed in the base alloy. However, no β-Fe was detected in the modified alloy, strongly indicating that Hf addition promotes the formation of the α-Fe phase but suppress the formation of the β-Fe phase. Furthermore, Hf addition can result not only in the formation of Hf-containing intermetallic compounds with different morphologies, which were identified as Si2Hf, but also, more importantly, in a significant decrease in the size, number, density, and volume fraction of porosity. After treatment with solution at 520 °C for 20 h, the formation of thermally stable Si2Hf precipitate was observed. After aging treatment at 180 °C up to 72 h, a delayed aging hardening was observed, which may be because Hf addition suppressed the formation of θ’ precipitate. Clearly, Hf addition in Al-Si-Cu alloy can modify the solidification microstructure and the precipitation microstructure, which is believed to be beneficial for mechanical properties. Indeed, a significant increase in elongation by 51.4% without a sacrifice of strength was obtained, compared with the unmodified Al-Si-Cu alloy. This investigation highlights the importance of a well-controlled solidification microstructure and precipitation microstructure for the improvement of mechanical properties, in particular to elongation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Effect of alloying elements on the segregation and dissolution of CuAl2 phase in Al-Si-Cu 319 alloys10.1023/A:1022857703995 ↗
2. The heat treatment of Al-Si-Cu-Mg casting alloys10.1016/j.jmatprotec.2010.03.020 ↗
3. Microstructural aspects of the dissolution and melting of Al2Cu phase in Al-Si alloys during solution heat treatment10.1007/BF02651928 ↗
4. The effect of Cu content on the level of microporosity in Al-Si-Cu-Mg casting alloys10.1016/S1359-6462(98)00492-8 ↗
5. Microstructural and mechanical properties characterization of heat treated and overaged cast A354 alloy with various SDAS at room and elevated temperature10.1016/j.msea.2015.09.072 ↗
6. Influence of Fe-rich intermetallics on solidification defects in Al-Si-Cu alloys10.1016/j.actamat.2014.01.007 ↗
7. Crystallographic studies on the iron-containing intermetallic phases in the 319-type aluminium casting alloys10.1080/14786430801942970 ↗
8. Effect of heat treatment and Fe content on the microstructure and mechanical properties of die-cast Al-Si-Cu alloys10.1016/j.matdes.2015.07.074 ↗
9. Simulation of the concomitant process of nucleation-growth-coarsening of Al2Cu particles in a 319 foundry aluminum alloy10.1088/0965-0393/23/4/045012 ↗
10. Improving high-temperature tensile and low-cycle fatigue behavior of Al-Si-Cu-Mg alloys through micro-additions of Ti, V, and Zr10.1007/s11661-015-2880-x ↗
11. Effects of iron on intermetallic compound formation in scandium modified Al-Si-Mg Alloys10.1016/j.jallcom.2014.07.037 ↗
12. Nucleation and precipitation strengthening in dilute Al-Ti and Al-Zr alloys10.1007/s11661-007-9283-6 ↗
13. Criteria for developing castable, creep-resistant aluminum-based alloys - A review10.3139/146.101249 ↗
14. Precipitation behaviors of cubic and tetragonal Zr-rich phase in Al-(Si-)Zr alloys10.1016/j.jallcom.2016.02.236 ↗
15. Interaction between molybdenum and manganese to form effective dispersoids in an Al-Si-Cu-Mg alloy and their influence on creep resistance10.1016/j.msea.2014.12.115 ↗
16. Thermal stability of (AlSi)(x)(ZrVTi) intermetallic phases in the Al-Si-Cu-Mg cast alloy with additions of Ti, V, and Zr10.1016/j.tca.2014.08.037 ↗
17. Grain refinement mechanism in an Al-Si-Mg alloy with scandium10.1016/j.jallcom.2012.07.018 ↗
18. Modification mechanism of eutectic silicon in Al-6Si-0.3Mg alloy with scandium10.1016/j.jallcom.2013.05.139 ↗
19. An investigation of dilute Al-Hf and Al-Hf-Si alloys10.1016/j.msea.2003.10.375 ↗
20. Nanobelts in multicomponent aluminum alloys10.1063/1.2978405 ↗
21. Z.H. Jia, Z.J. Chen, L. Arnberg, P. Asholt, Q. Liu, G.J. Huang, Hf-containing precipitates in Al-Si-Mg-Hf alloy during heat treatments at 400 degrees C-560 degrees C, in: Proceedings of the 13th International Conference on Aluminum Alloys (Icaa13), 2012, pp. 1167–1172.10.1002/9781118495292.ch175 ↗
22. Growth directions of precipitates in the Al-Si-Mg-Hf alloy using combined EBSD and FIB 3D-reconstruction techniques10.1017/S1431927615000549 ↗
23. The orientation relationships of nanobelt-like Si2Hf precipitates in an Al-Si-Mg-Hf alloy10.1107/S160057671600933X ↗
24. The combined use of EBSD and EDX analyses for the identification of complex intermetallic phases in multicomponent Al-Si piston alloys10.1016/j.jallcom.2009.09.181 ↗
25. Identification of intermetallic phases in a eutectic Al-Si casting alloy using electron backscatter diffraction pattern analysis10.1016/j.scriptamat.2004.04.015 ↗
26. HRTEM and HAADF-STEM of precipitates at peak ageing of cast A319 aluminium alloy10.1016/j.micron.2012.10.009 ↗
27. A metallographic study of porosity and fracture-behavior in relation to the tensile properties in 319.2 end-chill castings10.1007/BF02671250 ↗
28. Al-Hf (aluminum-hafnium)10.1007/BF02736468 ↗
29. Hf-Si binary phase diagram determination and thermodynamic modeling10.1361/105497100770340408 ↗
30. Effects of Mg content on microstructure and mechanical properties of Al-14.5Si-4.5Cu Alloy10.1007/s11661-009-0133-6 ↗
31. Effect of Be on aging behavior of an Al-Si-Cu-Mg cast alloy10.1361/10599490417605 ↗
32. Precipitation dependence of thermal properties for Al-Si-Mg-Cu-(Ti) alloy with various heat treatment10.1016/j.jallcom.2015.05.201 ↗
33. A study of tensile properties in Al-Si-Cu and Al-Si-Mg alloys: Effect of beta-iron intermetallics and porosity10.1016/j.msea.2008.01.028 ↗