journal article·2017-04Open access

Anisotropy effects during dwell-fatigue caused by δ-phase orientation in forged Inconel 718

Jonas Saarimäki, Magnus Hörnqvist Colliander, Johan J. Moverare

Abstract

Inconel 718 is a commonly used superalloy for turbine discs in the gas turbine industry. Turbine discs are often subjected to dwell-fatigue as a result of long constant load cycles. The effect of anisotropy on dwell-fatigue cracking in forged turbine discs have not yet been thoroughly investigated. Crack propagation behaviour was characterised using compact tension (CT) samples cut in different orientations from a real turbine disc forging. Samples were also cut in two different thicknesses in order to investigate the influence of plane strain and plane stress condition on the crack propagation rates. The samples were subjected to dwell-fatigue tests at 550 °C with 90 s or 2160 s dwell-times at maximum load. Microstructure characterisation was done using scanning electron microscopy (SEM) techniques such as electron channelling contrast imaging (ECCI), electron backscatter diffraction (EBSD), and light optical microscopy (LOM). The forged alloy exhibits strong anisotropic behaviour caused by the non-random δ-phase orientation. When δ-phases were oriented perpendicular compared to parallel to the loading direction, the crack growth rates were approximately ten times faster. Crack growth occurred preferably in the interface between the γ-matrix and the δ-phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Crack growth micro-mechanisms in the IN718 alloy under the combined influence of fatigue, creep and oxidation10.1016/j.ijfatigue.2009.01.023 ↗
2. Intergranular crack tip oxidation mechanism in a nickel-based superalloy10.1016/0921-5093(92)90358-8 ↗
3. Oxidation effects on the fatigue crack growth behaviour of alloy 718 at high temperature10.1016/S1359-6454(96)00192-9 ↗
4. Oxygen-induced intergranular cracking of a Ni-base alloy at elevated temperatures – an example of dynamic embrittlement10.1016/S1359-6454(01)00005-2 ↗
5. The effect of microstructure and environment on the crack growth behaviour of Inconel 718 Alloy at 650°C under fatigue, creep and combined loading10.1016/0025-5416(82)90167-7 ↗
6. Effects of microstructure on high temperature dwell fatigue crack growth in a coarse grain PM nickel based superalloy10.1016/j.actamat.2015.02.023 ↗
7. Elevated temperature fatigue crack growth under dwell conditions in Waspaloy10.1016/S0142-1123(97)00056-X ↗
8. The effect of hold-time on fatigue crack growth behaviors of WASPALOY alloy at elevated temperature10.1016/S0921-5093(02)00074-6 ↗
9. High temperature fatigue crack growth behaviour of Inconel 718 under hold time and overload conditions10.1016/j.ijfatigue.2012.10.018 ↗
10. Influence of overloads on dwell time fatigue crack growth in Inconel 71810.1016/j.msea.2014.06.068 ↗
11. A.K. Koul, P. Au, N. Bellinger, R. Thamburaj, W. Wallace, J.-P. Immarigeon, Development of a damage tolerant microstructure for inconel 718 turbine disc material, Superalloys, Sixth International Symposium, 1988.10.7449/1988/Superalloys_1988_3_12 ↗
12. Improving the resistance to intergranular cracking and corrosion at elevated temperatures by grain-boundary-engineering-type processing10.1007/s10853-007-2363-6 ↗
13. Niobium enrichment and environmental enhancement of creep crack growth in nickel-base superalloys10.1016/0956-716X(95)00120-K ↗
14. J.J. Schirra, R.H. Caless, R.W. Hatala, The effect of laves phase on the mechanical properties of wrought and cast+HIP inconel 718, in: Superalloys 718, 625 and Various Derivatives, 1991, pp. 375–388.10.7449/1991/Superalloys_1991_375_388 ↗
15. S. Ponnelle, B. Brèthes, A. Pineau, Orientational effects and influence of delta phase on fatigue crack growth rates in a forged disc of Inco718 superalloy, Superalloys 718, 625, 706 and Derivatives 92 (January 2001), 2001, 307–319, doi: http://dx.doi.org/10.7449/2001/Superalloys.10.7449/2001/Superalloys_2001_501_510 ↗
16. A microstructure-based time-dependent crack growth model for life and reliability prediction of turbopropulsion systems10.1007/s11661-013-1971-9 ↗
17. Influence of stress state on high temperature fatigue crack growth in Inconel 71810.1046/j.1460-2695.2001.00375.x ↗
18. The effects of environment and loading waveform on fatigue crack growth in Inconel 71810.1016/S0142-1123(99)00057-2 ↗
19. Crack growth under constant sustained load at elevated temperature in IN718 superalloy10.1179/mht.1999.003 ↗
20. Effects of loading waveform and stress field on high temperature fatigue crack growth of Alloy 71810.1002/mawe.200300663 ↗
21. Three-dimensional crack growth modelling of a Ni-based superalloy at elevated temperature and sustained loading10.1016/j.tafmec.2015.11.008 ↗
22. T-stress and its implications for crack growth10.1016/S0013-7944(02)00002-4 ↗
23. Hold-time effect on the thermo-mechanical fatigue crack growth behaviour of Inconel 71810.1016/j.msea.2011.08.027 ↗
24. J. Saarimäki, Dwell-fatigue Evaluation For Compact Tension Samples, 2016, http://dx.doi.org/10.5281/zenodo.61241.
25. Time- and cycle-dependent crack propagation in Haynes 28210.1016/j.msea.2016.01.111 ↗
26. Basic principles and application of electron channeling in a scanning electron microscope for dislocation analysis
27. K. Wackermann, U. Krupp, H.J. Christ, Effects of the environment on the crack propagation behavior of IN718 in the temperature range of the dynamic embrittlement, in: Proceedings of the ASTM Special Technical Publication, vol. 1539 STP of ASTM International Symposium on Creep-Fatigue Interactions: Test Methods and Models, Siegen, Germany, 2011, pp. 297–312.10.1520/STP49945S ↗
28. Gas phase embrittlement and time dependent cracking of nickel based superalloys10.1179/174892306X99679 ↗
29. Intergranular crack tip oxidation in a Ni-base superalloy10.1016/j.actamat.2013.02.050 ↗
30. M. Gao, D.J. Dwyer, R.P. Wei, Chemical and microstructural growth in inconel aspects 718 alloy of creep crack, in: Superalloys 718, 625, 706 and Various Derivatives, 1994, pp. 581–592.10.7449/1994/Superalloys_1994_581_592 ↗
31. Krupp · 2007
32. Modelling of high temperature fatigue crack growth in Inconel 718 under hold time conditions10.1016/j.ijfatigue.2013.03.004 ↗
33. Three-dimensional elastic-plastic finite-element analyses of constraint variations in cracked bodies10.1016/0013-7944(93)90299-8 ↗
34. Observation and modeling of physically short fatigue crack closure in terms of in-situ SEM fatigue test10.1016/j.msea.2014.08.021 ↗
35. Characterization and correlation of 3-D creep constraint between axially cracked pipelines and test specimens10.1016/j.engfracmech.2015.01.018 ↗
36. Effect of load ratio on fatigue crack growth in the near-threshold regime: a literature review, and a combined crack closure and driving force approach10.1016/j.engfracmech.2015.05.005 ↗
37. A crack opening stress equation for fatigue crack growth10.1007/BF00020751 ↗
38. The effect of crack tunneling on crack growth: experiments and CTOA analyses10.1016/S0013-7944(02)00131-5 ↗
39. Scatter in Dwell time cracking for a Ni-based superalloy in combination with overloads