Effect of deformation degree on the creep age forming of 7475 aluminum alloy: The feasibility of the extended deformation range
Source abstract
Abstract
Abstract The deformation degree of many integrated stiffened panels expected to adopt the creep age forming process, exceeds the linear elastic range. However, there is no research report on the possible results therefrom. And it is significant for the structural design and process optimization to systematically study the effect of deformation degree on the property and microstructure of the creep aging formed parts and ascertain the suitable deformation range. For this purpose, a series of creep age forming experiments of AA7475 sheet specimens with different curvature radiuses were conducted employing a radius-adjustable forming tool. Results indicated that the strength property varies by a low-to-peak-to-low manner as the increase of the deformation degree, and the radius-thickness ratio of the peak strength maintains a constant. Moreover, the measured range of the property fluctuation amplitude is 3.5–5.8%, which means a certain property difference may exist on different local regions of an integrated component with various curvature radiuses. In order to reduce the possible negative effect, it shall be necessary to pre-consider this factor and design a reasonable deformation range before the practical manufacturing process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Metal Forming Simulation Techniques · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. A review of the development of creep age forming: Experimentation, modelling and applications10.1016/j.ijmachtools.2010.08.007 ↗
2. Experimental studies and constitutive modelling of the hardening of aluminium alloy 7055 under creep age forming conditions10.1016/j.ijmecsci.2011.05.006 ↗
3. Modelling of springback in creep forming thick aluminum sheets10.1016/S0749-6419(03)00078-0 ↗
4. Constitutive modelling of primary creep for age forming an aluminium alloy10.1016/j.jmatprotec.2004.04.304 ↗
5. Creep-age forming of AA7475 aluminum panels for aircraft lower wing skin application10.1590/S1516-14392012005000080 ↗
6. Influence of predeformation on ageing in an Al–Zn–Mg alloy—I. Microstructure evolution and mechanical properties10.1016/S1359-6454(98)00293-6 ↗
7. Constitutive modeling for creep age forming of heat-treatable strengthening aluminum alloys containing plate or rod shaped precipitates10.1016/j.msea.2012.10.055 ↗
8. Stress aging of Al–xCu alloys: experiments10.1016/S1359-6454(01)00119-7 ↗
9. Effects of time and temperature on the creep forming of 7075 aluminum alloy: Springback and mechanical properties10.1016/j.msea.2011.08.025 ↗
10. Investigation of the age hardening and operative deformation mechanism of 7075 aluminum alloy under creep forming10.1016/j.msea.2012.05.027 ↗
11. Constitutive equations in creep of 7B04 aluminum alloys10.1016/j.msea.2010.02.047 ↗
12. Effects of two-stage creep-aging on precipitates of an Al–Cu–Mg alloy10.1016/j.msea.2014.07.014 ↗
13. Effects of two-stage creep-aging processing on mechanical properties of an Al–Cu–Mg alloy10.1016/j.matdes.2015.04.047 ↗
14. Development of new damage tolerant alloys for age-forming10.4028/www.scientific.net/MSF.396-402.601 ↗
15. Age-forming of beam structures – analysis of springback using a unified viscoplastic Model
16. Influence of multi-step heat treatments in creep age forming of 7075 aluminum alloy: Optimization for springback, strength and exfoliation corrosion10.1016/j.matchar.2012.05.012 ↗
17. Precipitation orientation effect of 2124 aluminum alloy in creep aging10.1016/S1003-6326(14)63313-6 ↗
18. Ageformable panels for commercial aircraft10.1243/09544100JAERO290 ↗
19. Creep age forming of 2124 aluminum alloy with single/double curvature10.1016/S1003-6326(13)62678-3 ↗
20. Investigation of precipitation in an Al–Zn–Mg alloy after two-step ageing treatment at 100° and 150°C10.1016/S0921-5093(99)00231-2 ↗
21. Characterisation of precipitation microstructures in aluminium alloys 7040 and 7050 and their relationship to mechanical behaviour10.1179/026708304225016662 ↗
22. Effect of creep-aging processing on corrosion resistance of an Al–Zn–Mg–Cu alloy10.1016/j.matdes.2014.04.054 ↗
23. Effects of pre-treatments on aging precipitates and corrosion resistance of a creep-aged Al–Zn–Mg–Cu alloy10.1016/j.matdes.2015.06.029 ↗
24. R.C. Rice, J.L. Jackson, J. Bakuckas, S. Thompson Metallic Materials Properties Development and Standardization (Chapter 3): Aluminum. 2003.
25. Z.T. Wang, R.Z. Tian, J.C. Gu, S.M. Zeng, Aluminum and its Processing Handbook, (Chapter 8): 7XXX Aluminum Alloy. 2005 (in Chinese).