journal article·2008-03

Isothermal annealing of cold-rolled high-purity nickel

H. Chang, I. Baker

Materials Science and Engineering: A· Volume 476· Issue 1-2
Publisher page

Abstract

Abstract Electron backscattered patterns have been employed to reveal the details of the texture evolution in 90%, 95% and 97.5% cold-rolled, polycrystalline, high-purity nickel specimens after 1 h anneals at a variety of temperatures. The results show that increasing the thickness reduction of cold-rolling both strengthened the cube texture developed after primary recrystallization, and increased its thermal stability at elevated temperatures. In the 90% cold-rolled specimens, secondary recrystallization occurred during annealing at 600 °C but could not be completed at temperatures up to 1000 °C. In contrast, extensive secondary recrystallization occurred in 95% and 97.5% cold-rolled specimens that were annealed at temperatures up to 1000 °C. Most of the orientations of the second recrystallized grains were related to the primarily recrystallized cube texture by a 41° rotation around about 〈1 1 1〉 axis or a 27° rotation about 〈2 1 1〉, while a few secondary-recrystallized grains were found to have an 18°/〈1 0 0〉 misorientation relationship with the cube-oriented matrix. It appears that the preferred rotation angles/axes is dependent on the rolling reduction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Magnetic Properties and Applications · Magnetic properties of thin films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Humphreys · 1995
2. Gottstein · 1999
3. Hirsch · Acta Metall. · 1988 · 36 · 286310.1016/0001-6160(88)90172-1 ↗
4. Doherty · Prog. Mater Sci. · 1997 · 42 · 3910.1016/S0079-6425(97)00007-8 ↗
5. Daaland · Acta Mater. · 1995 · 44 · 138910.1016/1359-6454(95)00289-8 ↗
6. Daaland · 1992 · 297
7. Maurice · Acta Metall. · 1993 · 41 · 165310.1016/0956-7151(93)90185-U ↗
8. Gawne · J. Inst. Steel Iron · 1971 · 209 · 562
9. Weiland · 1991 · 647
10. Makita · Acta Metall. · 1988 · 36 · 40310.1016/0001-6160(88)90016-8 ↗
11. Gervas’eva · Phys. Met. Metall. · 2000 · 90 · 295
12. Gervas’eva · Phys. Met. Metall. · 2003 · 96 · 209
13. Bowles · J. Inst. Metals · 1948 · 74 · 501
14. Kronberg · Trans. Metall. Soc. A.I.M.E. · 1949 · 185 · 501
15. Nast · Physica C · 2002 · 372–376 · 73310.1016/S0921-4534(02)00894-8 ↗
16. Heckelmann · Mater. Sci. Forum · 1992 · 94–96 · 39110.4028/www.scientific.net/MSF.94-96.391 ↗
17. Hayakawa · Acta Mater. · 1998 · 46 · 106310.1016/S1359-6454(97)00303-0 ↗
18. Baker · Microsc. Res. Tech. · 2004 · 63-5 · 28910.1002/jemt.20042 ↗
19. Li · Mater. Sci. Eng. A · 2005 · 392 · 810.1016/j.msea.2004.07.017 ↗
20. Lejcek · Mater. Sci. Eng. · 1983 · 60 · 12110.1016/0025-5416(83)90181-7 ↗
21. Druyvesteyn · Nature · 1957 · 17
22. Abe · Jpn. J. Metallo. · 1973 · 10 · 1115
23. Abbruzzese · Acta Metall. · 1986 · 34 · 90510.1016/0001-6160(86)90064-7 ↗
24. Abbruzzese · Acta Metall. · 1988 · 36 · 5510.1016/0001-6160(88)90028-4 ↗
25. Huang · Acta Mater. · 1999 · 47 · 225910.1016/S1359-6454(99)00062-2 ↗
26. M.L. Taheri, Ph.D. Thesis, Carnegie Mellon University (May 27, 2005) 166–173.