journal article·2009-08

Impact toughness and microstructure of continuous steel wire-reinforced cast iron composite

Ahmet Akdemir, Recai Kuş, Mehmet Şimşir

Materials Science and Engineering: A· Volume 516· Issue 1-2
Publisher page

Abstract

Abstract In this study, improvement of impact toughness of gray cast iron by reinforcing steel fiber was investigated. The composite material was produced by sand mould casting technique. Then, normalizing heat treatment was applied to the specimens at various temperatures (800 °C, 850 °C, and 900 °C). Charpy impact toughness tests were conducted at the temperature of −80 °C, 0 °C, and 27 °C. The results show that impact toughness of the gray cast iron is increased by reinforcing low carbon steel wire. As the test temperature is decreased, impact toughness of the composite specimens decreases considerably. It is noted that graphite free transition regions with high hardness were observed due to the carbon diffusion from cast iron to steel fiber. It is considered that interphase (fine pearlitic phase without graphite flakes) and bond quality in transition region contribute to increase in impact toughness of the cast iron composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Walton · 1981
2. Bertolino · Journal of Materials Processing Technology · 2006 · 179 · 20210.1016/j.jmatprotec.2006.03.082 ↗
3. Ceccarelli · Wear · 2004 · 256 · 4910.1016/S0043-1648(03)00257-6 ↗
4. Giacchi · Wear · 2007 · 262 · 28210.1016/j.wear.2006.05.005 ↗
5. Xu · Materials Science and Engineering A · 2005 · 390 · 32610.1016/j.msea.2004.08.030 ↗
6. El-Baradie · Materials Science · 2004 · 40 · 52310.1007/s11003-005-0071-4 ↗
7. Fu · Mat.-wiss. u. Werkstofftech. · 2007 · 38 · 23310.1002/mawe.200600053 ↗
8. Antolovich · 1972
9. Özdemir · Journal of Materials Processing Technology · 2003 · 141 · 22810.1016/S0924-0136(03)00154-7 ↗
10. Investigation of the fracture behavior of steel/steel laminates in crack divider orientation
11. Akdemir · Materials Science and Technology · 2005 · 21 · 109910.1179/174328405X51785 ↗
12. Kurt · Materials and Design · 2007 · 28 · 222910.1016/j.matdes.2006.06.002 ↗
13. Karamis · Composites: Part A · 2003 · 34 · 21710.1016/S1359-835X(03)00024-1 ↗
14. Kawamata · Engineering Fracture Mechanics · 2002 · 69 · 24910.1016/S0013-7944(01)00088-1 ↗
15. Carreno · Scripta Materialia · 2003 · 48 · 113510.1016/S1359-6462(02)00602-4 ↗
16. Hashmi · Journal of Materials Processing Technology · 2002 · 123 · 25110.1016/S0924-0136(02)00098-5 ↗
17. Şimşir · Journal of Materials Science · 2007 · 42 · 670110.1007/s10853-006-1493-6 ↗
18. Lesuer · International Materials Reviews · 1996 · 41
19. Aslantaş · Engineering Failure Analysis · 2004 · 11 · 36910.1016/j.engfailanal.2003.06.005 ↗
20. Aranzabal · Metallurgical & Materials Transaction A · 1997 · 28 · 114310.1007/s11661-997-0280-6 ↗
21. Rohatgi · Acta Materialia · 2003 · 51 · 293310.1016/S1359-6454(03)00108-3 ↗
22. R. Kuş, Investigation of mechanical properties of gray cast iron composite reinforced with low carbon steel fiber, Selçuk University, Ph.D. Thesis, 2007.
23. Radzikowska · Materials Characterization · 2005 · 54 · 28710.1016/j.matchar.2004.08.019 ↗