A study at understanding the mechanisms governing the high cycle fatigue and final fracture behavior of the titanium alloy: Ti–4Al–2.5V
Source abstract
Abstract
Abstract In this research paper, the cyclic stress amplitude-controlled high cycle fatigue properties and fracture behavior of a titanium alloy are presented and discussed. The material chosen for this study is a Ti–Al–V–Fe–O 2 alloy that is marketed under the trade name ATI 425™. This alloy was initially developed and put forth for use as a ballistic material but through the last few years it gained in stature for use in other areas due to a healthy combination of physical and mechanical properties. Test specimens were prepared, in conformance with the ASTM E-8 standard, from the as-received sheet stock, which was cold rolled and mill annealed, with the rolling direction both parallel (longitudinal) and perpendicular (transverse) to the length of the sheet. The test specimens were cyclically deformed at three different load ratios ( R = 0.1, R = 0.3 and R = 0.033) and the cycles-to-failure ( N f ) was recorded. The fatigue fracture surfaces were examined in a scanning electron microscope to examine the macroscopic fracture mode, the intrinsic features on the fatigue fracture surface and the role of magnitude of applied stress–microstructural feature interactions in governing failure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Naka · Current Opinion in Solid State and Materials Science · 1996 · 1 · 33310.1016/S1359-0286(96)80022-2 ↗
2. Seagle · Materials Science and Engineering · 1996 · 213 · 110.1016/0921-5093(96)10245-8 ↗
3. Schauerte · Advanced Engineering Materials · 2003 · June (5) · 419
4. Gorynin · Materials Science and Engineering · 1999 · 263 · 11210.1016/S0921-5093(98)01180-0 ↗
5. Sibum · Advanced Engineering Materials · 2003 · 5 · 39310.1002/adem.200310092 ↗
6. Schutz · Materials Science and Engineering · 1998 · 243 · 30510.1016/S0921-5093(97)00819-8 ↗
7. de Campos · Materials Research · 2005 · 8 · 44310.1590/S1516-14392005000400015 ↗
8. 2004 · 272
9. Donachie · 2000 · vols. 1–3
10. Moiseyev · 2006
11. Technical Data Sheet, Allegheny Ludlum Corporation, Pittsburgh, PA.
12. Donachie · 2000
13. Fatigue and Fracture, ASM Handbook, vol. 19, 2005, pp. 829–853.
14. Sadananda · International Journal of Fatigue · 2005 · 27 · 125510.1016/j.ijfatigue.2005.07.001 ↗
15. T.S. Srivatsan, Mithun Kuruvilla, Microstructure, Hardness, Tensile Deformation, Cyclic Fatigue and Fracture Behavior of Ti–Al–V–Fe–O2 Alloy, Final Technical Report, ATI Wah Chang, December 2007.
16. Hassen · 1984 · 147