journal article·2013-02Open access

Tensile properties and microstructural characteristics of indirect rheoformed A356 aluminum alloy

Amir Bolouri, Jung Woon Bae, Chung Gil Kang

Abstract

The effects of rheoforming parameters such as the rheoforming temperature and pressure on the tensile properties of H-shaped components were examined. An H-shaped component is useful for practical investigation into the influence of different wall thicknesses on the microstructural and mechanical properties. A simulation study on the effect of forming pressure on the die filling was conducted using the DEFORM-3D package, and the results were compared with that obtained using the actual rheoforming. The semisolid slurries were prepared by employing the electromagnetic stirring (EMS) technique. The components were rheoformed at different forming conditions and their tensile properties in the center and side positions were evaluated and linked to the corresponding microstructure. The tensile properties remained approximately constant when the rheoforming temperature was increased from 580 °C to 590 °C, but was followed by a substantial reduction at 600 °C. Moreover, the tensile properties in the center and side positions were distinct. Increasing the rheoforming pressure from 200 MPa to 250 MPa had a harmful effect on the elongation values, whereas the effect on the ultimate tensile strength values was limited. This trend could be linked to the increase in prevalence of internal defects such as the liquid segregation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Metal Forming Simulation Techniques · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Kapranos · Mater. Des. · 2000 · 21 · 38710.1016/S0261-3069(99)00077-1 ↗
2. Flemings · Metall. Mater. Trans. A · 1991 · 22 · 26910.1007/BF02651227 ↗
3. Kirkwood · Int. Mater. Rev. · 1994 · 39 · 17310.1179/095066094790150946 ↗
4. Fan · Int. Mater. Rev. · 2002 · 47 · 4910.1179/095066001225001076 ↗
5. Atkinson · Prog. Mater. Sci. · 2005 · 50 · 34110.1016/j.pmatsci.2004.04.003 ↗
6. P. Kapranos, D.H. Kirkwood, C.M. Sellars, H.E. Exner, V. Schumacher (Eds.), Advanced Processing and High Temperature Materials, in: Proceedings of EUROMAT 1989 Conference, Deutsche Gesellschaft fu¨r Metallkunde, Oberursel, Germany, 1989 pp. 165–168.
7. Tzimas · Mater. Sci. Eng. A · 2000 · 289 · 22810.1016/S0921-5093(00)00908-4 ↗
8. Zhang · Mater. Sci. Eng. A · 2010 · 528 · 51310.1016/j.msea.2010.09.046 ↗
9. Lü · Mater. Sci. Eng. A · 2011 · 528 · 635
10. Zhang · Trans. Nonferrous Met. Soc. China · 2011 · 21 · 213410.1016/S1003-6326(11)60985-0 ↗
11. Bolouri · J. Mater. Sci. · 2012 · 47 · 354410.1007/s10853-011-6200-6 ↗
12. Chung · Int. J. Adv. Manuf. Tech. · 2012 · 58 · 23710.1007/s00170-011-3376-5 ↗
13. Sajjadi · J. Alloys Compd. · 2012 · 511 · 22610.1016/j.jallcom.2011.08.105 ↗
14. Meng · J. Mater. Process. Technol. · 2012 · 212 · 173110.1016/j.jmatprotec.2012.04.003 ↗
15. Rassili · Trans. Nonferrous Met. Soc. China · 2010 · 20 · a104810.1016/S1003-6326(10)60629-2 ↗
16. Dai · Mater. Sci. Eng. A · 2012 · 538 · 32010.1016/j.msea.2012.01.051 ↗
17. Liu · Mater. Sci. Eng. A · 2003 · 361 · 21310.1016/S0921-5093(03)00528-8 ↗
18. de Freitas · J. Mater. Process. Technol. · 2004 · 146 · 24110.1016/j.jmatprotec.2003.11.007 ↗
19. Dodangeh · Mater. Sci. Eng. A · 2012 · A558 · 37110.1016/j.msea.2012.08.014 ↗
20. Chayong · Mater. Sci. Eng. A · 2005 · 390 · 310.1016/j.msea.2004.05.004 ↗
21. Chen · Mater. Sci. Eng. A · 2012 · 537 · 2510.1016/j.msea.2012.01.002 ↗
22. Kang · J. Mater. Process. Technol. · 2006 · 176 · 3210.1016/j.jmatprotec.2006.02.002 ↗
23. Birol · J. Alloys Compd. · 2009 · 473 · 13310.1016/j.jallcom.2008.05.074 ↗
24. Kim · Int. J. Mach. Tool Manuf. · 2008 · 48 · 162610.1016/j.ijmachtools.2008.07.009 ↗
25. Kim · Mater. Sci. Eng. A · 2008 · 497 · 30910.1016/j.msea.2008.07.007 ↗
26. Kim · J. Manuf. Sci. Eng. Trans. ASME · 2007 · 129 · 23710.1115/1.2673300 ↗
27. Nguyen · Int. J. Plastic. · 1994 · 10 · 66310.1016/0749-6419(94)90028-0 ↗
28. Limodin · Acta Metall. · 2007 · 55 · 3177
29. Bolouri · J. Alloys Compd. · 2012 · 516 · 19210.1016/j.jallcom.2011.12.045 ↗
30. Chen · Mater. Sci. Eng. A · 2004 · 382 · 9010.1016/j.msea.2004.04.029 ↗
31. Avner · 1964
32. R.F. Decker, R.D. Carnahan, R. Vining, E. Eldener, Progress in Thixomolding, in: Proceedings of the 4th International Conference on Semisolid Processing of Metals and Alloys, Sheffield, 1996 pp. 221–224.
33. Czerwinski · Acta Metall. · 2001 · 49 · 1225