Microstructural changes as postmortem temperature indicator in Ni–Co–Cr–Al–Y oxidation protection coatings
Source abstract
Abstract
Microstructural changes in a metallic oxidation protection coating (Ni-Co-Cr-Al-Y) applied on a nickel base superalloy were investigated by means of scanning and transmission electron microscopy. The changes are due either to thermal mechanical fatigue testing under high thermal gradients or to defined isothermal heat treatments. The coated specimens were quenched from temperatures between 840 and 1100 C to ambient temperature. The resultant phases, their local distribution and compositions were determined by energy dispersive X-ray (EDX) spectroscopy and electron diffraction. Phase equilibria at respective temperatures were determined by thermodynamic calculations based on the CALPHAD method. The calculated and experimentally determined phase distributions were compared. A particular microstructural feature, namely the existence and spatial distribution of spherical gamma' Ni3Al precipitates in the coating and the diffusion zone between substrate and coating, was used as a postmortem indicator for the maximum temperature experienced by the specimen during testing. This paper gives a road map for developing a microstructural-based temperature calibration for complex metallic materials using thermodynamic simulations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Brandl · Surf. Coat. Technol · 1996 · 86–87 · 4110.1016/S0257-8972(96)03039-3 ↗
2. Huang · Surf. Coat. Technol · 1992 · 53 · 6510.1016/0257-8972(92)90104-I ↗
3. Beele · Surf. Coat. Technol · 1997 · 94–95 · 4110.1016/S0257-8972(97)00473-8 ↗
4. Choquet · Mater. Sci. Eng · 1987 · 88 · 9710.1016/0025-5416(87)90072-3 ↗
5. Miller · J. Therm. Spray Technol · 1997 · 6 · 3510.1007/BF02646310 ↗
6. Fritscher · Materialwiss. Werkstofftech · 1997 · 28 · 38410.1002/mawe.19970280815 ↗
7. Baufeld · Mater. Sci. Eng., A · 2001 · 315 · 23110.1016/S0921-5093(01)01208-4 ↗
8. Fritscher · J. Cryst. Growth · 2003 · 250 · 54610.1016/S0022-0248(02)02458-2 ↗
9. Krukovsky · Surf. Coat. Technol · 2004 · 177–178 · 3210.1016/j.surfcoat.2003.06.002 ↗
10. Bartsch · Adv. Eng. Mater · 1999 · 1 · 12710.1002/(SICI)1527-2648(199910)1:2<127::AID-ADEM127>3.0.CO;2-6 ↗
11. G. Marci, K. Mull, C. Sick, M. Bartsch, in: H. Sehitoglu, H.J. Maier (Eds.), Thermo-Mechanical Fatigue Behaviour of Materials, third volume, ASTM STP 1371, American Society for Testing and Materials, West Conshohocken, PA, USA, 2000, p. 296.10.1520/STP15267S ↗
12. B. Baufeld, M. Bartsch, in: A.F. Blom (Ed.), Fatigue 2002, Proceedings of the Eighth International Fatigue Congress, vols. 4–5, Stockholm, Sweden, 2002, Engineering Materials Advisory Services Ltd., Stockholm, Sweden, 2002, p. 2493.
13. M. Bartsch, K. Mull, C. Sick, in: W.G. Reuter, R.S. Piascik (Eds.), Fatigue and Fracture Mechanics, 33rd volume, ASTM STP 1417, American Society for Testing and Materials, West Conshohocken, PA, USA, 2002, p. 147.
14. Tawancy · J. Mater. Sci · 1994 · 29 · 244510.1007/BF00363439 ↗
15. N. Dupin, Ph.D. Thesis, Institut National Polytechnique de Grenoble, France, 1995.
16. Dupin · Scan. J. Metall · 2001 · 30 · 18410.1034/j.1600-0692.2001.300309.x ↗
17. Brož · Mater. Sci. Eng., A · 2002 · 324 · 2810.1016/S0921-5093(01)01278-3 ↗
18. Brož · Intermet · 2002 · 10 · 63510.1016/S0966-9795(02)00044-4 ↗
19. D.R.G. Achar, R. Munoz-Arroyo, L. Singheiser, W.J. Quadakkers, Surf. Coat. Technol., in press.
20. N. Saunders, A.P. Miodovnik, CALPHAD (calculation of phase diagram)—A Comprehensive Guide, Elsevier Science, Amsterdam, the Netherlands, 1998.
21. Hillert · Acta Chem. Scand · 1970 · 24 · 361810.3891/acta.chem.scand.24-3618 ↗
22. Andersson · Calphad · 2002 · 26 · 27310.1016/S0364-5916(02)00037-8 ↗
23. Borgenstam · J. Phase Equil · 2000 · 21 · 26910.1361/105497100770340057 ↗
24. J.O. Andersson, L. Höglund, B. Jönnson, J. Ågren, in: G.R. Purdy (Ed.), Fundamentals and Applications of Ternary Diffusion, Pergamon Press, New York, 1990, p. 153.10.1016/B978-0-08-040412-7.50023-2 ↗
25. J.S. Kirkaldy, D.J. Young (Eds.), Diffusion in the Condensed State, The Institute of Metals, London, UK, 1987.
26. Campbell · Acta Mater · 2002 · 50 · 77510.1016/S1359-6454(01)00383-4 ↗
27. K.A. Ellison, J.A. Daleo, D.H. Boone, in: J. Lecomte-Beckers, F. Schubert, P.J. Ennis (Eds.), Materials for Advanced Power Engineering 1998, in: Proceedings of the Sixth Liège Conference Part III, Forschungszentrum Jülich, Jülich, Germany, 1998, p. 1523.