journal article·2007-07

Microstructural refinement of an Fe–C alloy within the ferritic range via two different strain paths

S.M. Lim, M. El Wahabi, C. Desrayaud, F. Montheillet

Publisher page

Abstract

Abstract One of the most popular approaches to ultrafine grain formation within bulk samples is severe plastic deformation (SPD). In this paper, grain refinement by two SPD techniques involving different strain paths, namely multiaxial compression (MAC) and torsion, has been investigated. A coarse-grained, high-purity iron–carbon alloy was deformed within the ferritic domain under cold and warm working conditions to large strains (≫1). Subsequent analyses by orientation imaging microscopy revealed that the nature and extent of refinement depend upon the processing route. In MAC, fragmentation occurs mainly by means of a dense, homogeneous network of low angle boundaries (LAB, 2 ≤ θ ≤ 15°) delimiting subgrains (∼1 μm), and only a few strain-induced high angle boundaries (HAB, θ ≥ 15°) are observed in localised regions of cold worked samples. In torsion, however, the proportion of HAB is significantly higher (37–54%), giving rise to a fragmented microstructure comprising ultrafine crystallites (1–2 μm).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Valiev · 2004
2. Segal · Mater. Sci. Eng. A · 1995 · 197 · 15710.1016/0921-5093(95)09705-8 ↗
3. Dupuy · Mater. Sci. Eng. A · 2002 · 337 · 24110.1016/S0921-5093(02)00027-8 ↗
4. Han · J. Mater. Process. Technol. · 2003 · 136 · 10010.1016/S0924-0136(02)01014-2 ↗
5. Gazder · 2004
6. Park · Metall. Mater. Trans. A · 2001 · 32A · 237310.1007/s11661-001-0211-x ↗
7. Zhilyaev · 2004
8. R.Z. Valiev, Proceedings of the NATO Adv. Research Workshop, Metallic Materials with High Structural Efficiency, NATO Sci. Series. II. Math. Phys. and Chem., vol. 146, Kluwer Academic Publishers, 2004, pp. 79–90.
9. Valiev · Acta Mater. · 1996 · 44 · 470510.1016/S1359-6454(96)00156-5 ↗
10. Dobatkin · 2004 · 333
11. Belyakov · Philos. Mag. Lett. · 2000 · 80 · 71110.1080/09500830050192927 ↗
12. Kaibyshev · Mater. Sci. Eng. A · 2003 · 344 · 34810.1016/S0921-5093(02)00440-9 ↗
13. O. Sitdikov, A. Goloborodko, T. Sakai, H. Miura, R. Kaibyshev, Proceedings of the THERMEC’2003, Mater. Sci. Forum, vols. 426–432, Trans Tech Publications, 2003, pp. 381–386.10.4028/www.scientific.net/MSF.426-432.381 ↗
14. Belyakov · Acta Mater. · 2003 · 51 · 84710.1016/S1359-6454(02)00476-7 ↗
15. G.A. Salishchev, R.M. Galeyev, S.V. Zherebtsov, S.Yu. Mironov, O.R. Valiakhmetov, S.P. Malysheva, Proceedings of the NATO Adv. Research Workshop, Metallic Materials with High Structural Efficiency, NATO Sci. Series. II. Math. Phys. and Chem., vol. 146, Kluwer Academic Publishers, 2004, pp. 401–412.
16. Sitdikov · Scripta Mater. · 2004 · 51 · 17510.1016/j.scriptamat.2004.02.034 ↗
17. S.M. Lim, M. El Wahabi, C. Desrayaud, F. Montheillet, Proceedings of the THERMEC’2006, Adv. Mater. Research, vols. 15–17, Trans Tech Publications, 2007, pp. 900–905.10.4028/www.scientific.net/AMR.15-17.900 ↗
18. H.P. Stiiwe, Proceedings of the NATO Advanced Research Workshop, Metallic Materials with High Structural Efficiency, NATO Sci. Series. II. Math. Phys. and Chem., vol. 146, Kluwer Academic Publishers, 2004, pp. 47–54.
19. Romanov · Eur. J. Mech. A/Solids · 2003 · 22 · 72710.1016/S0997-7538(03)00089-5 ↗
20. Hughes · Acta Mater. · 1997 · 45 · 387110.1016/S1359-6454(97)00027-X ↗
21. S.M. Lim, C. Desrayaud, S. Girard, F. Montheillet, Proceedings of the THERMEC’2006, Mater. Sci. Forum, vols. 539–543, Trans Tech Publications, 2007, pp. 2898–2903.10.4028/www.scientific.net/MSF.539-543.2898 ↗
22. Le Coze · 1994 · 371
23. Fields · Proc. ASTM · 1957 · 57 · 1259
24. Armstrong · J. Mech. Phys. Solids · 1982 · 30 · 3710.1016/0022-5096(82)90012-6 ↗
25. Desrayaud · J. Mater. Process. Technol. · 2006 · 172 · 15210.1016/j.jmatprotec.2005.09.015 ↗
26. Ringeval · 2004 · 487
27. Avitzur · 1968
28. Hume-Rothery · 1966
29. Schmitt · Int. J. Plast. · 1994 · 10 · 53510.1016/0749-6419(94)90013-2 ↗
30. R. Song, D. Ponge, D. Raabe, Max-Planck Project Report, Max-Planck-Institut fur Eisenforschung GmbH, 2005.
31. Song · Acta Mater. · 2005 · 53 · 84510.1016/j.actamat.2004.10.051 ↗
32. Baczynski · Acta Mater. · 1996 · 44 · 427310.1016/1359-6454(96)00114-0 ↗
33. T. Oliveira, Effet du niobium et du titane sur la déformation à chaud d’aciers inoxydables ferritiques stabilisés, PhD thesis, Ecole Nationale Supérieure des Mines de Saint-Etienne, 2003.
34. R. Kaibyshev, I. Mazurina, Proceedings of the Recrystallization and Grain Growth, Mater. Sci. Forum, vols. 467–470, 2004, pp. 1251–1260.10.4028/www.scientific.net/MSF.467-470.1251 ↗
35. Valiev · Mater. Sci. Eng. A · 1997 · 234–236 · 5910.1016/S0921-5093(97)00183-4 ↗
36. Morris · Acta Mater. · 2002 · 50 · 404710.1016/S1359-6454(02)00203-3 ↗
37. Gholinia · Acta Mater. · 2002 · 50 · 446110.1016/S1359-6454(02)00253-7 ↗