journal article·2014-01

Effects of varying twist and twist rate sensitivities on the interpretation of torsion testing data

John J. Jonas, Frank Montheillet, Laszlo S. Toth, Chiradeep Ghosh

Publisher page

Abstract

The Nadai and Fields and Backofen expressions are widely used to convert the torque/twist data obtained during torsion testing into shear stress/shear strain curves as well as von Mises equivalent stress/ equivalent strain curves. However, when employed in the conventional manner using average values of the twist hardening exponent N, they overestimate the critical strains for the initiation of twinning, dynamic transformation and dynamic recrystallization by comparison with the values determined using compression testing. By contrast, when the local or instantaneous values of the exponent are employed, the torsion and compression results are in good agreement. Another feature of the corrected curves is that they indicate that considerably more dynamic softening takes place during the high temperature deformation of austenite than suggested by the average N flow curves. It is shown that, despite the lack of work conjugacy between the torque-twist and stress-strain curves, the above expressions always lead to the correct constitutive behavior at the external radius. (C) 2013 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Nadai · 1950 · 347
2. Fields · Proc. ASTM · 1957 · 57 · 1259
3. Semiatin · 1985 · 154
4. Poliak · Acta Mater. · 1996 · 44 · 12710.1016/1359-6454(95)00146-7 ↗
5. Mirzadeh · Mater. Des. · 2010 · 31 · 117410.1016/j.matdes.2009.09.038 ↗
6. Gottstein · Mater. Sci. Eng. A · 2004 · 387–389 · 60410.1016/j.msea.2004.02.098 ↗
7. Solhjoo · Mater. Des. · 2010 · 31 · 136010.1016/j.matdes.2009.09.001 ↗
8. Manonukul · Acta Mater. · 1999 · 47 · 433910.1016/S1359-6454(99)00313-4 ↗
9. Ebrahimi · J. Mater. Sci. Technol. · 2012 · 28 · 46710.1016/S1005-0302(12)60084-X ↗
10. Liang · Acta Math. Sin. · 2006 · 19 · 26510.1016/S1006-7191(06)60054-9 ↗
11. Zhao · J. Rare Earths · 2008 · 26 · 84610.1016/S1002-0721(09)60019-3 ↗
12. Sun · ISIJ Int. · 2008 · 48 · 99410.2355/isijinternational.48.994 ↗
13. Choi · ISIJ Int. · 2003 · 43 · 74610.2355/isijinternational.43.746 ↗
14. Hong · ISIJ Int. · 2003 · 43 · 39410.2355/isijinternational.43.394 ↗
15. Qi · Acta Mater. Sin. · 2002 · 38 · 897
16. Dong · Curr. Opin. Solid State Mater. Sci. · 2005 · 9 · 26910.1016/j.cossms.2006.02.014 ↗
17. Liu · Mater. Sci. Eng. A · 2013 · 583 · 24210.1016/j.msea.2013.06.074 ↗
18. Hong Qin, McGill University, unpublished work.
19. Jonas · ISIJ Int. · 2013 · 53 · 14510.2355/isijinternational.53.145 ↗
20. Ghosh · Steel Res. Int. · 2013 · 84 · 49010.1002/srin.201200188 ↗
21. J.J. Jonas, C. Ghosh, X. Quelennec, , V.V. Basabe, 2012. Predicting the occurrence of dynamic transformation and of rolling mill loads drops by hot torsion and compression testing, in: Proceedings of the 3rd International Conference on Thermo-Mechanical Simulation and Processing of Steel, SimPro'12, RDCIS, SAIL, Ranchi, India, Dec. 12–14, 2012, pp. 3–12.
22. Ghosh · Acta Mater. · 2013 · 61 · 234810.1016/j.actamat.2013.01.006 ↗
23. Jonas · Steel Res. Int. · 2013 · 84 · 25310.1002/srin.201200166 ↗
24. Jonas · Mater. Sci. Forum · 2013 · 762 · 110.4028/www.scientific.net/MSF.762.1 ↗
25. Les · Scr. Mater. · 1999 · 41 · 52310.1016/S1359-6462(99)00184-0 ↗
26. Kocks · Acta Metall. · 1979 · 27 · 41910.1016/0001-6160(79)90034-8 ↗