journal article·2011-04

Investigation of the tensile properties of continuous steel wire-reinforced gray cast iron composite

Ahmet Akdemir, Recai Kuş, Mehmet Şimşir

Materials Science and Engineering: A· Volume 528· Issue 10-11
Publisher page

Abstract

Abstract The aim of the present study was to improve the tensile properties of gray cast iron by reinforcing the material with a steel wire. The composite was produced by sand mold casting, and the specimens were normalized by applying heat treatments at 800 °C, 850 °C, and 900 °C. Tension tests were conducted on gray cast iron and composite specimens, and the microstructure of the specimens was examined with an optical microscope. The fracture surface of the tension test specimens was examined with a scanning electron microscope (SEM), and graphite-free transition regions with high degrees of hardness were observed due to the diffusion of carbon from the cast iron to the steel wire. The microstructure of the transition region (fine pearlitic phase with partially dissolved graphite flakes) and the bond quality in the transition region increased the tensile properties of cast iron composites. Also, it is concluded that the tensile properties of gray cast iron increased with an increase in the normalization temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Walton · 1981
2. Bertolino · Journal of Materials Processing Technology · 2006 · 179 · 20210.1016/j.jmatprotec.2006.03.082 ↗
3. Ceccarelli · Wear · 2004 · 256 · 4910.1016/S0043-1648(03)00257-6 ↗
4. Giacchi · Wear · 2007 · 262 · 28210.1016/j.wear.2006.05.005 ↗
5. Xu · Materials Science and Engineering A · 2005 · 390 · 32610.1016/j.msea.2004.08.030 ↗
6. El-Baradie · Materials Science · 2004 · 40 · 52310.1007/s11003-005-0071-4 ↗
7. Antolovich · 1972
8. Özdemir · Journal of Materials Processing Technology · 2003 · 141 · 22810.1016/S0924-0136(03)00154-7 ↗
9. Şimşir · Turkish Journal of Engineering and Environmental Sciences · 2004 · 28 · 397
10. Akdemir · Materials Science and Technology · 2005 · 21 · 109910.1179/174328405X51785 ↗
11. Kurt · Materials and Design · 2007 · 28 · 222910.1016/j.matdes.2006.06.002 ↗
12. Karamis · Composites: Part A · 2003 · 34 · 21710.1016/S1359-835X(03)00024-1 ↗
13. Kawamata · Engineering Fracture Mechanics · 2002 · 69 · 24910.1016/S0013-7944(01)00088-1 ↗
14. Carreno · Scripta Materialia · 2003 · 48 · 113510.1016/S1359-6462(02)00602-4 ↗
15. Akdemir · Materials Science and Engineering A · 2009 · 516 · 11910.1016/j.msea.2009.03.006 ↗
16. Ellis · International Materials Reviews · 1996 · 41 · 4110.1179/imr.1996.41.2.41 ↗
17. Agarwala · Material Science and Engineering A · 1999 · 270 · 21010.1016/S0921-5093(99)00251-8 ↗
18. Nozruzov · Metal Science and Heat Treatment · 1999 · 41 · 49110.1007/BF02471217 ↗
19. Sun · Materials Science and Engineering A · 2001 · 300 · 13510.1016/S0921-5093(00)01657-9 ↗
20. Avcı · Journal of Materials Processing and Technology · 2009 · 209 · 141010.1016/j.jmatprotec.2008.03.052 ↗
21. Simsir · Journal of Materials Science · 2007 · 42 · 670110.1007/s10853-006-1493-6 ↗
22. Aranzabal · Metallurgical and Materials Transaction A · 1997 · 28 · 114310.1007/s11661-997-0280-6 ↗
23. Kus R. Investigation of mechanical properties of gray cast iron composite reinforced with low carbon steel fibre. Selçuk University, Ph.D. Thesis, (2007), (Turkish).