Aging behavior of ultrafine-grained AA6063/SiC composites with varying reinforcement sizes
Source abstract
Abstract
Abstract The present work investigated the synergetic effect of varying reinforcement sizes (12 μm (coarse), 1 μm (fine), 45 nm (nano)) and cryorolling on aging behavior and mechanical properties of bulk ultrafine grained (UFG) AA6063/4 wt%SiC composites produced via a hybrid route of stir casting and cryorolling. Aging of UFG composites was carried out at different temperatures in the range of 100 °C–175 °C. The results showed that decrease in SiC particle size accelerated the age hardening kinetics and the maximum age hardening effect was observed at 150 °C. The enhancement in age hardening kinetics is attributed to the presence of high dislocation density due to the (i) difference in coefficient of thermal expansion between SiC particles and matrix alloy and (ii) statistically stored dislocation during deformation. Also, the precipitation behavior in UFG composites is established and the microstructural characterization showed the accelerated precipitation kinetics in UFG nano composite. The enhanced age hardening kinetics ultimately improved the strength of the UFG composites compared to UFG base alloy. Among the UFG composites, UFG nano composite showed highest age hardening effect. The overall increase in strength in UFG nano composite is due to the dominant effect of precipitation, dislocation, and grain boundary strengthening mechanisms.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Life-cycle energy and greenhouse gas emission benefits of lightweighting in automobiles: review and harmonization10.1021/es3042115 ↗
2. Aluminium in innovative light-weight car design10.2320/matertrans.L-MZ201132 ↗
3. Aluminium in future cars - a challenge for materials science
4. Thermal stability, grain growth kinetics, and mechanical properties of bulk ultrafine-grained AA6063/SiC composites with varying reinforcement sizes10.1007/s11661-019-05342-6 ↗
5. Influence of SiC ceramic reinforcement size in establishing wear mechanisms and wear maps of ultrafine grained AA6063 composites10.1016/j.ceramint.2019.06.274 ↗
6. Development and strengthening mechanisms of bulk ultrafine grained AA6063/SiC composite sheets with varying reinforcement size ranging from nano to micro domain10.1016/j.jallcom.2018.06.306 ↗
7. Ex situ Al-Al2O3 ultrafine grained nanocomposites produced via powder metallurgy10.1016/j.jallcom.2013.10.236 ↗
8. Effect of particle size on microstructure and mechanical properties of composites produced by ARB process10.1016/j.msea.2010.11.056 ↗
9. Wear resistance and tribological features of pure aluminum and Al-Al2O3 composites consolidated by high-pressure torsion10.1016/j.wear.2013.12.022 ↗
10. Effect of high-pressure torsion on the microstructure and strengthening mechanisms of hot-consolidated Cu-CNT nanocomposite10.1016/j.msea.2015.04.085 ↗
11. Microstructure evolution and mechanical properties in ultrafine grained Al/TiC composite fabricated by accumulative roll bonding10.1016/j.compositesb.2015.03.009 ↗
12. Homogeneous and ultrafine-grained metal matrix nanocomposite achieved by accumulative press bonding as a novel severe plastic deformation process10.1016/j.scriptamat.2014.12.007 ↗
13. Microstructures and tensile properties of ultrafine-grained Ni-(1-3.5) wt% SiCNP composites prepared by a powder metallurgy route
14. A review on high-pressure torsion (HPT) from 1935 to 198810.1016/j.msea.2015.11.074 ↗
15. Precipitation phenomena in ultrafine grained Al-Mg-Si alloy with heterogeneous microstructure10.1016/j.actamat.2015.10.030 ↗
16. Precipitation phenomena, thermal stability and grain growth kinetics in an ultra-fine grained Al 2014 alloy after annealing treatment10.1016/j.jallcom.2015.07.098 ↗
17. Effect of ageing on tensile behavior of ultrafine grained Al 6061 alloy10.1016/j.msea.2015.06.036 ↗
18. Aging behaviour of Al-Mg-Si alloys subjected to severe plastic deformation by ECAP and cold asymmetric rolling10.1155/2011/959643 ↗
19. Post-ecap ageing treatment of aluminum 6063 alloy
20. Natural aging behavior of AA7050 Al alloy after cryogenic rolling10.1016/j.msea.2013.11.017 ↗
21. Aging behavior of 6061Al matrix composite reinforced with high content SiC nanowires10.1016/j.jallcom.2015.07.233 ↗
22. Three-dimensional characterization of interaction between β″ precipitate and dislocation in Al-Mg-Si alloy10.1016/j.jallcom.2014.02.059 ↗
23. Aging behavior of high volume fraction SiCp/Al composites fabricated by pressureless infiltration10.1016/j.jallcom.2016.04.127 ↗
24. Enhanced aging kinetic of Al3BC/6061 Al composites and its micro-mechanism
25. Aging behavior of a 2024 Al alloy-SiCp composite10.1016/j.matdes.2009.11.063 ↗
26. Aging behavior of an in-situ TiB2/Al-Cu-Li-x matrix composite10.1016/j.matchar.2016.11.034 ↗
27. Aging behavior of nano-SiC/2014Al composite fabricated by powder metallurgy and hot extrusion techniques10.1016/j.jmst.2016.07.011 ↗
28. Aging and mechanical properties of Al-Li/SiCp composite produced by mechanical milling and extrusion processing10.1080/10426919908914806 ↗
29. Effect of aging treatment on mechanical properties of (SiCw + SiCp)/2024Al hybrid nanocomposites
30. A theoretical and experimental study of aluminum alloy 6061-SiC metal matrix composite to identify the operative mechanism for accelerated aging10.1016/0921-5093(89)90345-6 ↗
31. 6061 aluminium alloy-SiC particulate composite: a comparison between aging behavior in T4 and T6 treatments10.1016/0921-5093(91)90575-8 ↗
32. Influence of dislocation density and distribution on the aging behavior of 6061 Al-SiCw composites10.1016/0956-7151(90)90071-N ↗
33. 3D finite element study of temperature variations during equal channel angular pressing
34. Mechanical behavior during aging of plastically deformed AA6061-SiCp composite in different temperatures
35. The influence of room temperature and cryogenic temperature rolling on the aging and wear behaviour of Al–4Cu–5TiB2 in situ composites10.1016/j.jallcom.2008.12.153 ↗
36. Influence of aging parameters on the mechanical properties of 6063 aluminium alloy10.1016/S0924-0136(99)00476-8 ↗
37. Deformation behavior of ultrafine grained A356 material processed by cryorolling and development of Johnson–Cook model10.1016/j.msea.2017.12.015 ↗
38. The HighScore suite10.1017/S0885715614000840 ↗
39. Influence of initial microstructure on microstructural stability and mechanical behavior of cryorolled A356 alloy subjected to annealing10.1007/s11661-017-4153-3 ↗
40. Effect of rolling temperature on microstructure and mechanical properties of cryorolled Al-Mg-Si alloy reinforced with 3wt% TiB2 in-situ composite10.4028/www.scientific.net/AMR.584.556 ↗
41. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
42. Particle size effect on the interfacial properties of SiC particle-reinforced Al-Cu-Mg composites10.1016/j.msea.2017.11.068 ↗
43. A study on the aging behavior of Al6061 composites reinforced with Y2O3 and TiC10.3390/met7010011 ↗
44. Effect of aging on mechanical and wear properties of beryl particulate reinforced metal matrix composites
45. Effect of solution temperature on aging behavior and properties of SiCp/Al-Cu-Mg composites10.1016/j.msea.2010.10.075 ↗
46. First-principles study of crystal structure and stability of Al-Mg-Si-(Cu) precipitates10.1016/j.actamat.2004.05.037 ↗
47. Microstructure and properties of mechanically milled AZ61 powders dispersed with submicron/nanometer Ti particulates10.1016/j.matchar.2017.03.017 ↗
48. Effect of ball milling on the ageing response of Al2618 composites reinforced with SiC and oxide nanoparticles10.1016/j.jallcom.2016.09.265 ↗
49. The effect of heat treatment on microstructure evolution in artificially aged carbon nanotube/Al2024 composites synthesized by mechanical alloying10.1016/j.matchar.2017.01.006 ↗
50. Synthesis, characterization and mechanical properties of in-situ (TiC-TiB2) reinforced magnesium matrix composite10.1016/j.matdes.2016.07.024 ↗
51. The effect of precipitate shape and orientation on dispersion strengthening in high strength aluminium alloys10.4028/www.scientific.net/MSF.217-222.1257 ↗
52. Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy10.1016/j.actamat.2013.09.042 ↗
53. Strengthening contributions in ultra-high strength cryorolled Al-4%Cu-3%TiB2 in situ composite10.1016/S1003-6326(14)63106-X ↗
54. Strengthening behavior of particulate reinforced MMCs10.1016/0956-716X(92)90108-Q ↗