Functional fatigue of Ni50.3Ti25Hf24.7 – Heterogeneities and evolution of local transformation strains
Source abstract
Abstract
Abstract Shape memory alloys achieve their unique and desirable property of large recoverable strains through phase transformation. The attained magnitudes of transformation strains is strongly affected by the level of deformation heterogeneity during the transformation process and is impacted by plastic deformation and the accumulation of retained martensite/austenite following repeated cycling. This paper is dedicated to study the heterogeneity in the total and transformation strains of the high temperature shape memory alloy Ni 50.3 Ti 25 Hf 24.7 subjected to fatigue loading and aims to provide further insight to the source of transformation strain instability. Under isobaric loading conditions, full field strain measurements were collected during thermal cycling and utilized to assess the local changes in the deformation field. Transformation strains increased globally in the first few cycles of loading followed by a relatively stable response and eventually started to exhibit drop in their magnitudes with continued loading. No homogenization of the transformation strain field was observed as a result of either stress increase or thermal cycling. The transformation strains were localized and the global evolution in their magnitudes was associated with local changes, either increasing or decreasing local strains, in spatially the same regions. The experimental results are discussed with the aim to provide a deeper understanding of the stability of transformation strains, their evolution under cyclic loading, the heterogeneities developing in the deformation field, and the relation between local and global response due to the accumulation of irrecoverable strains.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Shape memory strains and temperatures in the extreme
2. Modelling of martensite slip and twinning in NiTiHf shape memory alloys10.1080/14786435.2014.913109 ↗
3. High temperature shape memory alloys10.1179/095066010X12646898728363 ↗
4. Compressive response of NiTi single crystals10.1016/S1359-6454(00)00153-1 ↗
5. Shape memory response of polycrystalline NiTi12.5Hf alloy: transformation at small scales10.1007/s40830-015-0033-0 ↗
6. Load-biased shape-memory and superelastic properties of a precipitation strengthened high-temperature Ni50.3Ti29.7Hf20 alloy10.1016/j.scriptamat.2010.12.028 ↗
7. Effects of nanoprecipitation on the shape memory and material properties of an Ni-rich NiTiHf high temperature shape memory alloy10.1016/j.actamat.2013.08.048 ↗
8. Transformation strains and temperatures of a nickel–titanium–hafnium high temperature shape memory alloy10.1016/j.actamat.2014.04.071 ↗
9. Tensile shape memory behavior of Ni50.3Ti29.7Hf20 high temperature shape memory alloys10.1016/j.matdes.2016.03.163 ↗
10. Microstructural response during isothermal and isobaric loading of a precipitation-strengthened Ni-29.7Ti-20Hf high-temperature shape memory alloy10.1007/s11661-012-1297-z ↗
11. Mechanical and functional behavior of a Ni-rich Ni50.3Ti29.7Hf20 high temperature shape memory alloy10.1016/j.intermet.2014.02.006 ↗
12. Constant-strain thermal cycling of a Ni50.3Ti29.7Hf20 high-temperature shape memory alloy10.1007/s40830-016-0068-x ↗
13. TEM study of structural and microstructural characteristics of a precipitate phase in Ni-rich Ni–Ti–Hf and Ni–Ti–Zr shape memory alloys,"10.1016/j.actamat.2013.06.057 ↗
14. The influence of aging on critical transformation stress levels and martensite start temperatures in NiTi: Part I—aged microstructure and micro-mechanical modeling10.1115/1.2815993 ↗
15. Structure analysis of a precipitate phase in an Ni-rich high-temperature NiTiHf shape memory alloy10.1016/j.actamat.2013.02.023 ↗
16. Coughlin · 2013
17. Effect of aging on the martensitic transformation characteristics of a Ni-rich NiTiHf high temperature shape memory alloy10.1142/S1793604712500385 ↗
18. Benafan · 2012
19. A method to enhance cyclic reversibility of NiTiHf high temperature shape memory alloys10.1016/j.scriptamat.2006.02.029 ↗
20. Instability of cyclic superelastic deformation of NiTi investigated by synchrotron X-ray diffraction10.1016/j.actamat.2015.04.039 ↗
21. High-temperature functional behavior of single crystal Ni51.2Ti23.4Hf25.4 shape memory alloy10.1016/j.actamat.2016.01.015 ↗
22. High temperature shape memory behavior of Ni50.3Ti25Hf24.7 single crystals10.1016/j.scriptamat.2016.01.015 ↗
23. Stress dependence of the hysteresis in single crystal NiTi alloys10.1016/j.actamat.2004.03.038 ↗