journal article·2016-10

High toughness and multiphase microstructure transition product of carburizing steel by a novel heat treatment cooling process

Bo Jiang, Zhen Mei, Le-yu Zhou, Guang-lei Liu, Zhi-lin Wang, Bin Huang, Ya-zheng Liu

Publisher page

Abstract

Abstract A novel heat treatment cooling process was applied to a Fe-0.27C-1.50Mn-1.7Si-0.35Cr-0.64Mo-1.50Ni-0.10 V (wt%) carburizing steel. The cooling process was designed based on the continuous cooling transformation (CCT) and time-temperature-transformation (TTT) analyses of the carburizing steel. Mechanical property results of the heat treatment samples show that the carburizing steels exhibit excellent toughness (118 J) which is superior to that of the traditional quenching process. Microstructural characterization indicates that high toughness of the carburizing steel subjected to the cooling heat treatment process results from a proper multiphase microstructure transition from the surface to the matrix of the steel. The key factors which greatly improve the toughness are the lower bainite consisting of fine ferrite laths and retained austenite films along the laths at the transition region and the carbide-free lower bainite at the matrix.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Effect of carburizing on notch fatigue behaviour in AISI 316 austenitic stainless steel10.1016/j.surfcoat.2005.09.018 ↗
2. Effect of heat treatment on mechanical properties and fracture behaviour of a 12CrMoV steel10.1016/0921-5093(90)90184-5 ↗
3. Isothermal heat treatment of a bearing steel for improved mechanical properties10.1016/j.jallcom.2015.11.051 ↗
4. The influence of austenitizing and tempering temperature on the hardness and fracture toughness of hot-worked H11 tool steel10.1016/j.jmatprotec.2006.04.016 ↗
5. Effect of large-size M23C6-type carbides on the low-temperature toughness of martensitic heat-resistant steels10.1016/j.jallcom.2016.05.294 ↗
6. The relationship between fracture toughness and microstructure in the cleavage fracture of mild steel
7. Microstructure and mechanical properties of 780 MPa high strength steels produced by direct-quenching and tempering process10.1023/A:1015290930107 ↗
8. Impact toughness and microstructure relationship in niobium-and vanadium-microalloyed steels processed with varied cooling rates to similar yield strength10.1016/j.msea.2006.08.007 ↗
9. Fatigue behaviour and fracture mechanism of a 316 stainless steel hardened by carburizing10.1016/j.ijfatigue.2003.08.024 ↗
10. Fatigue crack propagation in carburized high alloy bearing steels10.1007/BF02670330 ↗
11. A novel method for the development of a low-temperature bainitic microstructure in the surface layer of low-carbon steel10.1016/j.scriptamat.2008.03.024 ↗
12. Effects of carburizing process variables on mechanical and chemical properties of carburized mild steel10.6000/1927-5129.2012.08.02.11 ↗
13. Microstructural characterization and hardening mechanism of steel for large size bearing ring under fast heating and short soaking time condition
14. The influence of grain boundary carbide and grain size on the cleavage strength and impact transition temperature of steel10.1016/0001-6160(86)90026-X ↗
15. Effective grain size and Charpy impact properties of high-toughness X70 pipeline steels10.1007/s11661-005-0331-9 ↗
16. Effect of block size on the strength of lath martensite in low carbon steels10.1016/j.msea.2005.12.048 ↗
17. Effect of carburizing on notch fatigue behaviour in AISI 316 austenitic stainless steel10.1016/j.surfcoat.2005.09.018 ↗
18. Effect of tempering temperature on the toughness of 9Cr–3W–3Co martensitic heat resistant steel10.1016/j.matdes.2013.09.017 ↗
19. Effect of microstructure on the fatigue crack growth behavior of Cu–Be–Co–Ni alloy10.1016/j.jallcom.2015.12.017 ↗
20. A path independent integral and the approximate analysis of strain concentration by notches and cracks10.1115/1.3601206 ↗
21. Influence of microstructure and load ratio on cyclic fatigue and final fracture behavior of two high strength steels10.1016/j.matdes.2013.10.003 ↗
22. Effects of pore position in depth on stress/strain concentration and fatigue crack initiation10.1007/s11661-011-0947-x ↗
23. H.K.D.H Bhadeshia, Institute of Materials, Bainite in Steels, Inst. of Metals, 1992.
24. Tempering of the bainite and the bainite/martensite duplex structure in a low-carbon low-alloy steel
25. Modification of microstructure to increase impact toughness of nanostructured bainite–austenite steel10.1179/1743284714Y.0000000675 ↗
26. Effects of cooling conditions on microstructure, tensile properties, and charpy impact toughness of low-carbon high-strength bainitic steels10.1007/s11661-012-1372-5 ↗
27. Enhanced ductility and toughness in an ultrahigh-strength Mn–Si–Cr–C steel: the great potential of ultrafine filmy retained austenite10.1016/j.actamat.2014.05.055 ↗
28. Cleavage initiation in steel: competition between large grains and large particles10.1016/j.msea.2012.11.019 ↗
29. Effect of bimodal grain size distribution on scatter in toughness10.1007/s11661-009-9794-4 ↗
30. Effect of substructure on mechanical properties and fracture behavior of lath martensite in 0.1C–1.1 Si–1.7 Mn steel10.1016/j.jallcom.2016.03.100 ↗
31. V.T.T Miihkinen, D.V. Edmonds, Influence of retained austenite on the fracture toughness of high strength steels, ICF6, New Delhi, India,1984, 2013.10.1016/B978-1-4832-8440-8.50138-1 ↗
32. Improvement in lower temperature mechanical properties of 0.40 pct C-Ni-Cr-Mo ultrahigh strength steel with the second phase lower bainite10.1007/BF02644225 ↗
33. Heat treatment for improvement in lower temperature mechanical properties of 0.40 pct C-Cr-Mo ultrahigh strength steel10.1007/BF02663314 ↗
34. Effect of morphology of martensite–austenite phase on fracture of weld heat affected zone in vanadium and niobium microalloyed steels10.1179/026708309X12512744154360 ↗