Effect of the milling atmosphere on the microstructure and mechanical properties of a ODS Fe-14Cr model alloy
Source abstract
Abstract
A systematic study has been undertaken to assess how the milling atmosphere, in the processing of an ODS steel with nominal composition Fe-14Cr-0.3Y(2)O(3) (wt%), will affect the microstructure and mechanical properties of the resultant alloys. Batches of the steel were manufactured by a powder metallurgy route incorporating mechanical alloying, hot isostatic pressing, forging and heat treatment. Hydrogen or helium atmospheres were used in the mechanical alloying, with all other processing parameters remaining identical. Transmission electron microscopy (TEM) and Atom Probe Tomography (APT) show that both milling atmospheres promote a homogeneous dispersion of Y-rich nanoparticles in the final alloys, being smaller when milling in H. Previously reported mechanical characterisation of these alloys shows better mechanical response at high temperature for the alloy milled in a H. This can be justified by the presence of smaller Y-rich nanoparticles together with the absence of bubbles, observed in the alloy milled in He.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fusion materials and technologies · Nuclear Materials and Properties · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Alloying design of oxide dispersion-strengthened ferritic steel for long-life Fbrs core materials10.1016/0022-3115(93)90200-I ↗
2. Influence of particle dispersions on the high-temperature strength of ferritic alloys10.1016/j.jnucmat.2007.03.151 ↗
3. Recent developments in irradiation-resistant steels10.1146/annurev.matsci.38.060407.130315 ↗
4. Atomic structure of nanoclusters in oxide-dispersion-strengthened steels10.1038/nmat3150 ↗
5. Effects of processing condition on the microstructural and tensile properties of 14Cr-based oxide dispersion strengthened alloys10.1016/j.jnucmat.2013.09.043 ↗
6. C. Burrows, The Irradiation Resistance of Oxide Dispersion Strengthened Steels, in: d.g.i. University of Oxford (Ed.), Thesis (D.Phil.), University of Oxford, 2015, 2014.
7. On the role of alloy composition and processing parameters in nanocluster formation and dispersion strengthening in nanostuctured ferritic alloys10.1016/j.actamat.2008.09.025 ↗
8. Review on the EFDA work programme on nano-structured ODS RAF steels10.1016/j.jnucmat.2010.12.065 ↗
9. Gorley · 2014
10. Microstructure and mechanical properties of ultrafine-grained Fe-14Cr and ODS Fe-14Cr model alloys10.1016/j.jnucmat.2010.12.060 ↗
11. Microstructure and mechanical behavior of ODS and non-ODS Fe-14Cr model alloys produced by spark plasma sintering10.1016/j.jnucmat.2013.01.331 ↗
12. Microstructure examination of Fe-14Cr ODS ferritic steels produced through different processing routes10.1016/j.jnucmat.2014.04.004 ↗
13. Processing and microstructure characterisation of oxide dispersion strengthened Fe-14Cr-0.4Ti-0.25Y(2)O(3) ferritic steels fabricated by spark plasma sintering10.1016/j.jnucmat.2015.04.029 ↗
14. Effect of mechanical alloying atmosphere on the microstructure and Charpy impact properties of an ODS ferritic steel10.1016/j.jnucmat.2008.12.148 ↗
15. Effects of MA environment on the mechanical and microstructural properties of ODS ferritic steels10.1016/j.jnucmat.2010.12.058 ↗
16. Influence of mechanical alloying atmospheres on the microstructures and mechanical properties of 15Cr ODS steels10.5516/NET.07.2013.096 ↗
17. Energy-filtered TEM imaging and EELS study of ODS particles and argon-filled cavities in ferritic-martensitic steels10.1016/j.micron.2004.08.001 ↗
18. Analytical characterization of secondary phases and void distributions in an ultrafine-grained ODS Fe-14Cr model alloy10.1016/j.jnucmat.2010.12.067 ↗
19. Helium bubble distributions in a nanostructured ferritic alloy10.1016/j.jnucmat.2012.11.049 ↗
20. Microstructure and tensile properties of oxide dispersion strengthened Fe-14Cr-0.3Y2O3 and Fe-14Cr-2W-0.3Ti-0.3Y2O310.1016/j.jnucmat.2012.11.001 ↗
21. Dislocation evolution during tensile deformation in ferritic-martensitic steels revealed by high-energy X-rays10.1016/j.actamat.2014.05.026 ↗
22. Achieving sub-nanometre particle mapping with energy-filtered TEM10.1016/j.ultramic.2009.05.006 ↗
23. Gault · 2012
24. IVAS 3.6.6©, CAMECA Instruments, Inc, 2013.
25. Analytical characterisation of oxide dispersion strengthened steels for fusion reactors10.1179/1743284710Y.0000000013 ↗
26. R. Dominguez-Reyes, M.A. Auger, M.A. Monge, R. Pareja, Positron annihilation study of the vacancy clusters in ODS Fe-14Cr alloys, Philos. Mag., 2016, (submitted for publication).10.1080/14786435.2017.1280621 ↗
27. Characterization of ion-irradiated ODS Fe-Cr alloys by doppler broadening spectroscopy using a positron beam10.1016/j.jnucmat.2015.04.033 ↗
28. Miller · 2000
29. Defining clusters in APT reconstructions of ODS steels10.1016/j.ultramic.2012.12.011 ↗
30. Atom probe tomography: a technique for nanoscale characterization10.1017/S1431927604040577 ↗
31. Quantitative atom probe analysis of nanostructure containing clusters and precipitates with multiple length scales10.1016/j.ultramic.2010.12.029 ↗
32. Thermal stability of nanoscale helium bubbles in a 14YWT nanostructured ferritic alloy10.1016/j.jnucmat.2013.10.024 ↗