On the effect of equal-channel angular pressing on creep of tempered martensite ferritic steels
Source abstract
Abstract
Abstract The effect of long-term aging and equal-channel angular pressing (ECAP) on creep of the tempered martensite ferritic steel P91 at 650 °C and 120 MPa was studied. We compare the creep behaviour of a material which was subjected to a standard heat treatment (austenitizing and air cooling followed by tempering and air cooling) to the creep properties of an overaged (standard heat treatment followed by 1 week overaging at 700 °C) and an overaged and severely plastically deformed (ECAP, one 90° pass at 250 °C) material. During overaging, carbides coarsen and as a consequence, the creep-rate of the overaged material is higher than that of the material after a standard heat treatment. Severe plastic deformation of the overaged material results in an increase of room-temperature hardness. But as a striking new result, the creep-rate of this material increases after ECAP. This result is discussed on the basis of a scenario where a high density of mobile dislocations results in higher creep rates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Kostka · Acta Mater. · 2007 · 55 · 53910.1016/j.actamat.2006.08.046 ↗
2. Bhadeshia · 1992
3. Otsuka · 1998
4. Leslie · 1995
5. Porter · 1992
6. Earthman · Mater. Sci. Eng. · 1989 · A 110 · 10310.1016/0921-5093(89)90161-5 ↗
7. Eggeler · Steel Res. · 1987 · 58 · 9710.1002/srin.198701594 ↗
8. Eggeler · Mater. Tech. · 1986 · 14 · 187
9. Eggeler · Acta Metall. · 1989 · 37 · 322510.1016/0001-6160(89)90194-6 ↗
10. A. Dronhofer, J. Pešička, A. Dlouhý, G. Eggeler, Z. Metall., in press.
11. Pesicka · Acta Mater. · 2003 · 51 · 484710.1016/S1359-6454(03)00324-0 ↗
12. Pesicka · Mater. Sci. Eng. A · 2004 · 387–389 · 17610.1016/j.msea.2004.03.080 ↗
13. Maruyama · ISIJ Int. · 2001 · 41 · 64110.2355/isijinternational.41.641 ↗
14. Sikka · 1983 · 413
15. Kolbe · Mat.-wiss. u. Werkstofftech · 1999 · 30 · 46510.1002/(SICI)1521-4052(199908)30:8<465::AID-MAWE465>3.0.CO;2-L ↗
16. Mälzer · TMS Lett. · 2005 · 2 · 27
17. Blum · Steel Res. · 1991 · 62 · 7210.1002/srin.199101253 ↗
18. Straub · 1994 · 623