journal article·2008-08

Work hardening as a strengthening mechanism in periodic cellular materials

E. Bele, B.A. Bouwhuis, G.D. Hibbard

Materials Science and Engineering: A· Volume 489· Issue 1-2
Publisher page

Abstract

Periodic cellular materials (PCMs) can be fabricated using perforation-stretching methods to produce 3D microtruss structures that have greater architectural efficiency than conventional metal foams. These methods can also introduce significant work hardening. However, the elevated temperatures of the subsequent joining step typically used to create a sandwich panel (e.g., brazing), means that much of the induced strengthening is lost. The present study first examines the effectiveness of work hardening in improving the mechanical properties of stand-alone AA3003 pyramidal PCM cores. It is found that nearly a twofold increase in peak strength can be obtained. Next, an alternative joining method (resistance brazing) is developed with the objective of localizing the heat-affected zone to the truss core nodes. Microhardness profiles of prototype resistance brazed PCM sandwich panels showed that much of the work hardening was preserved in the struts and compression testing showed only a ∼5% loss in peak strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Polymer Foaming and Composites · Polymer composites and self-healing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Sypeck · Appl. Compos. Mater. · 2005 · 12 · 22910.1007/s10443-005-1129-z ↗
2. Wicks · Int. J. Sol. Struct. · 2001 · 38 · 516510.1016/S0020-7683(00)00315-2 ↗
3. Deshpande · Int. J. Sol. Struct. · 2001 · 38 · 627510.1016/S0020-7683(01)00103-2 ↗
4. Ashby · Philos. Mag. · 2005 · 85 · 323510.1080/14786430500079892 ↗
5. Wadley · Compos. Sci. Technol. · 2003 · 63 · 233110.1016/S0266-3538(03)00266-5 ↗
6. Sypeck · Adv. Eng. Mater. · 2002 · 4 · 75910.1002/1527-2648(20021014)4:10<759::AID-ADEM759>3.0.CO;2-A ↗
7. Simone · Acta Mater. · 1998 · 46 · 310910.1016/S1359-6454(98)00017-2 ↗
8. Zhou · Mater. Sci. Eng. A · 2004 · 386 · 11810.1016/S0921-5093(04)00933-5 ↗
9. Chiras · Int. J. Sol. Struct. · 2002 · 39 · 409310.1016/S0020-7683(02)00241-X ↗
10. Kooistra · Acta Mater. · 2004 · 52 · 422910.1016/j.actamat.2004.05.039 ↗
11. Rathbun · J. Appl. Mech. · 2004 · 71 · 36810.1115/1.1757487 ↗
12. Kooistra · Mater. Des. · 2007 · 28 · 50710.1016/j.matdes.2005.08.013 ↗
13. Wen · Int. J. Heat Mass Trans. · 2006 · 49 · 331310.1016/j.ijheatmasstransfer.2006.03.024 ↗
14. Sypeck · Metall. Mater. Trans. B · 2005 · 36 · 12510.1007/s11663-005-0012-5 ↗
15. Safiullin · Mater. Sci. Forum · 1997 · 243–245 · 76910.4028/www.scientific.net/MSF.243-245.769 ↗
16. Tiang · Int. J. Heat Mass Trans. · 2004 · 47 · 317110.1016/j.ijheatmasstransfer.2004.02.010 ↗
17. 1993
18. Shanley · J. Aero. Sci. · 1947 · 15 · 26110.2514/8.1346 ↗
19. W. Ramberg, W.R. Osgood, Description of Stress–Strain Curves by Three Parameters, Technical Note 902, NACA, Washington, 1943.
20. de Martino · Mater. Struct. · 1990 · 23 · 5910.1007/BF02472998 ↗
21. 1990
22. Niles · 1954
23. Shanley · 1957
24. Rasmussen · Eng. Struct. · 2000 · 23 · 150510.1016/S0141-0296(99)00089-9 ↗
25. 2002
26. Abedrabbo · Int. J. Plast. · 2006 · 22 · 31410.1016/j.ijplas.2005.03.005 ↗
27. Davis · 1993
28. Omni Technologies Corporation: http://www.omnibraze.com/brazing.html.
29. ANSI/AWS/SAE Standard D8.9-02, American Welding Society, Miami, FL, 2002.
30. ASTM C365-06, American Society for Testing and Materials, Philadelphia, PA, 2006.
31. Bouwhuis · Metall. Mater. Trans. B · 2006 · 37 · 91910.1007/BF02735014 ↗
32. Olurin · Mater. Sci. Eng. A · 2002 · 29 · 136
33. Ashby · 2000
34. Cahoon · Met. Trans. · 1971 · 2 · 197910.1007/BF02913433 ↗